Chapter 59

Lay the blade flat and hold the blade close to tan with only one finger. He wanted to feel the center of gravity of the blade.

Feeling that the blade was balanced, Chen Xin released his hand holding the handle. Under the action of gravity, the blade stood up on Chen Xin's fingers with the back of the blade.

This is a characteristic of samurai sword. If it is well cast, when the finger is placed at the center of gravity of the blade, the blade will stand up by itself with the back of the blade under the action of gravity, and can be held by one finger.

Seeing that the black knife was firmly standing on his finger, Chen Xin showed a satisfied smile at the corner of his mouth, hooked his finger, rotated the blade and grasped the handle.

Holding the knife lightly, Chen Xin could not even feel the weight of the blade, as if he was holding only a feather.

But in addition to its lightness, the knife does not give the holder a feeling of lightness. When wielding the knife, he can still feel the process of power transferring from the handle to the tip.

Chen Xin is very satisfied with the change of his love for Dao, especially when he makes a chopping action with the Dao and the blade doesn't make any sound.

"It's a good knife, but it's not concealed by a gun." Although Chen Xin couldn't put down his love for the new sword, he still put it back in the weapon cabinet after a bit of rubbing and playing.

His purpose of upgrading the weapon cabinet is not to upgrade these weapons, but to obtain the capability of gun manufacturing.

He pulled back his chair and sat down in front of the extra workbench next to the weapon cabinet. Chen Xin simply checked the tools on the table. Some of them he knew, but some he had never seen.

After picking up a few tools at random and putting them back in their original places, Chen Xin found the drawings of the guns obtained after upgrading the weapon cabinet from the drawer of the workbench.

"Drawing of 7.62mm double trigger semi-automatic pistol"

"required parts: barrel, sleeve, re-entry spring, trigger, hammer, safety device, gun handle, cartridge clip"

"parts can be processed by tool table or parts can be completed by survival"

on the drawing is a pistol with familiar shape, some of which are similar to M1911, but there are some differences.

However, Chen Xin is not a pistol enthusiast, and he doesn't have a deep research on it. What he cares about is how to make a gun, not what kind of pistol it is.

Through reading the drawings and consulting the instructions provided by the system, Chen Xin finally knows how to use the tool table in front of him to make a pistol.

First of all, Chen Xin must have raw materials. If there are no or unqualified raw materials, he can spend the survival to supplement or improve the quality.

Secondly, according to the size of the drawing, the tools on the tool table are complete, which can fully meet the needs of processing parts.

It's just that it's a bit of a test of Chen Xin's craft. If the machining accuracy is not enough, obviously there is something wrong with the pistol.

Of course, it can also cost survival to make unqualified parts qualified.

If you really want to save time, you can also directly spend the survival to make parts, but if you do, it will be a little more expensive than your own processing.

As for the assembly of parts, it can't be replaced by survival. The system only provides 3D dynamic assembly diagram, and Chen Xin needs to do the assembly himself.

Knowing this, Chen Xin immediately wanted to make a pistol.

In terms of raw materials, Chen Xin only needs to spend 2 survival points to improve the quality of steel because there is still steel left in the previous exchange.

As for self processing, Chen Xin hesitated for a moment and gave up the idea. Instead, he chose to spend another 3 points to survive and let the system help complete the processing.

Looking at the neatly placed parts on the workbench, Chen Xin restrained his excitement and called out the assembly diagram provided by the system. After carefully looking at it twice, he confirmed that he had clearly remembered the steps, and then he started the assembly.

Carefully assembling each part according to the system's instructions, Chen Xin's action is quite slow. Compared with those people on TV who can quickly assemble guns blindfolded, Chen Xin is obviously a layman.

But even so, he still stumbling to assemble the gun.

After inserting the cartridge clip, Chen Xin pulls the sleeve and holds the pistol, which he has assembled by himself. Chen Xin makes a handsome aiming posture.

"Bang!" With a bit naive mouth simulation gunshot, Chen Xin this will be the pistol back to the workbench.

Gun is a familiar and strange thing to Chen Xin.

Which boy didn't play with a gun when he was a child? Even though they're not real guns.

Strange to say, thanks to the total ban on guns policy of the people's Republic of China, it is very rare for ordinary people to see guns in their lives, not to mention touching them.

Of course, even if Chen Xin has never seen a gun, he knows that the gun he assembled is useless except to scare people.

Because it also lacks an important component, that is, bullets.The power of a gun depends largely on the bullet rather than the gun itself.

The gun itself is just a platform for firing. Although it has a certain impact on the power of bullets, the advantages and disadvantages of the gun itself are more to affect the shooting accuracy than the power.

In fact, most shooting games subconsciously ignore this point, leading many people to think that as long as the gun has bullets, it can kill enough. The better the gun, the more powerful it is. But in fact, it is not the case.

Chen Xin's pistol uses 7.62mm caliber bullets, and the clip can hold 12 bullets.

This is an international model of bullets. Many countries in the world are using this caliber of bullets, not only for pistols, but also for machine guns.

Of course, pistol bullets and machine gun bullets are still different in length. In general, the length of pistol bullets is 17mm, that is to say, the standard specification of 7.62mm pistol bullets should be 7.62 × 17mm.

Since the worktable has the function of making firearms, bullets, as an important part of firearms, naturally will not be less.

It's just that Chen Xin, who doesn't have gunpowder, still needs to spend 1 Survival point to supplement materials if he wants to make bullets.

Fortunately, it's easier to make bullets than to make gun parts, especially when there are machines. It took Chen Xin only some time to make a box of bullets.

The bullets were filled into the magazine one by one, and then inserted into the handle of the gun. Chen Xin pulled the sleeve again, but this time one bullet had been pushed into the gun.

Chen Xin, who is afraid of fire, turns off the trigger's safety, pulls out the cartridge clip again and presses a bullet in. Then he inserts the cartridge clip back and touches the pistol, feeling a great sense of security.

www.novelhall.com , the fastest update of the webnovel!