Chapter 5

Under the leadership of Wang Qingfeng, the three left the two-story office building and went to the modern workshop with light steel structure tens of meters away.

When I went there, the workers just went to the canteen with lunch boxes from the workshop. They had to work overtime after an hour's rest. When the workers in greasy overalls saw the factory director coming to the workshop with a young child, they couldn't help talking.

As soon as he reached the gate of the factory, Yun Fei kept shaking his head.

From the outside, the newly built simple factory building has a modern feeling, but inside, it's like entering the factory building during the British Industrial Revolution. It's a mess!

The original color of the equipment can not be seen clearly. The iron filings on the ground make it almost impossible for people to step down. All kinds of blanks are stacked around the equipment, and all kinds of semi-finished products and finished products are also placed on the ground.

"Brother Yun, there is no way to do these things. Workers have to work overtime every day and have no time for special equipment maintenance. We are private enterprises. As long as we can do our work, there is no need to be as good-looking as state-owned factories." Seeing Yun Fei entering the workshop, he shook his head at the environment in the workshop, Wang Qingfeng explained.

Yun Fei shook his head and refused to comment.

"Last year, our factory purchased eight 20 lathes, two 30 lathes and four lifting milling machines from Beijing machine tool factory from Shenyi machine. The processing capacity of ordinary parts is still relatively strong..."

Indeed, the hardware strength of Qingfeng machinery is still good, but Yunfei really can't say anything about the workers and environment here. In such an environment, he is not sure whether he can do those jobs with high precision.

"Boss Wang, can you show me your CNC machine tool?" Seeing the environment, Yun Fei backed out.

Working in such a dirty environment is very depressing.

Although it is a second-hand equipment from abroad and has not been operated so far, Wang Qingfeng still regards the junk in the eyes of foreigners as a baby pimple. A workshop was specially built next to the machining workshop to house the two lathes and a milling machine.

Yun Fei couldn't help laughing. That CNC milling machine is actually JCS-013, and the two CNC lathes are actually vdf800. For having heard it many times in Chinese mainland, the two kinds of CNC machine tools, which are familiar with the 80s, are not too familiar with each other. However, he was really a little skeptical about who was such a loser that he sold these equipment once worth nearly $100000 at a price of less than 300000.

In the state-owned factory where Yunfei was once located, these master machines in the early 1980s are still in use, although there are many problems.

These n-hand CNC machine tools, which have been tossed and turned many times before falling into Wang Qingfeng's hands, can fully meet the use requirements for the current Qingfeng machinery.

Although it was a master machine in the early 1980s, if there were no major problems and serious wear, there would be no problem making the stainless steel thin-walled parts on that complex drawing.

If you can reach the conclusion of those stainless steel thin-walled parts, you must carefully check the two CNC lathes before you can make a decision.

Asked Wang Qingfeng to know that the three CNC machine tools were not connected to the power supply. This has to make Yun Fei lament the face thinking of these bosses in this era.

At first, Wang Qingfeng bought these three CNC machine tools to let those customers who came to visit his factory know his strength. Therefore, whether these machine tools are started or not is not important to him.

Now, the fat in front of him needs these numerical control equipment, so he has to start to re-examine himself.

At Yunfei's request, Wang Qingfeng gave Yunfei the technical data and operation manual of these CNC equipment, and then ran to the canteen to find the electrician who was eating.

When Yunfei asked Wang Qingfeng for technical materials and operation manuals, Wang Qingfeng was still a little skeptical. He didn't believe that Yunfei, a half child, could understand technical materials and operation manuals full of letters.

Therefore, after reading the technical data in Yunfei for a long time, he ran contentedly to find an electrician to connect the power to these CNC equipment.

After looking through two thick technical materials and operation manuals, Yun Fei knew that these machine tools were not all from Germany as Wang Qingfeng said. JCS-013 is produced in Switzerland and uses rbfanuc7m system; Vdf800 is produced in Germany and uses rbfanuc6 system.

These devices make people laugh and can only be deeply helpless. In his era, domestic CNC machine tools could not even compare with foreign low-end machines, and the small production capacity could not even meet the requirements of military systems. Therefore, before the mid-1990s, most of the domestic CNC market was occupied by foreign companies.

Wang Qingfeng soon took the electrician to the workshop where the CNC machine tool was located. He was busy for a whole time before he almost connected the wire.

After turning on the power switch, I found that the whole display screen was blank, and there was no operation interface for future generations. After a little thought, I understood. These CNC machine tools are estimated to be taken advantage of by Wang Qingfeng because there is no PLC control program.

Using the CD machine equipped with the NC machine tool to open the programming interface, when Wang Qingfeng and Liu Yushui were stunned, Yun Fei quickly input groups of letters through the operation panel of the PLC controller.

In the original world, the PLC control program cloud before the 21st century was not only simulated and compiled on the computer, but it doesn't know how to use it, but it is used now.

While quickly inputting the ladder program, he kept smoking one by one. In less than an hour, the packet of Hongtashan Yunfei given by Secretary Zhang to Yunfei had been smoked out.

"Boss Wang, do you have any cigarettes?" Yunfei once again stopped in Mo's trouser pocket. There was no smoke. He turned and found that Wang Qingfeng and Liu Yushui were staring at him.

"I'll buy it for you right away." Seeing that Yunfei asked himself for a cigarette, Wang Qingfeng touched his pocket, leaving only an empty cigarette box. Liu Yushui, who was with him, had already finished smoking one by one.

"Hongta mountain, I only smoke Hongta mountain. Hurry up!" Yunfei didn't notice that he was giving orders to the person who was about to become his boss. At this time, his mind was all about the evolution of ladder program.

Wang Qingfeng soon bought a Hongta mountain not far from the factory. When the secretary is not around, he can only run errands himself.

Private bosses in this era simply don't care about being ordered. Wang Qingfeng had always thought that the CNC equipment he bought could only be used as decoration to show his strength to the guests visiting his factory. Now he saw that Yunfei, a child who asked for a sky high salary, could skillfully operate and let him buy a pack of cigarettes. How can he promise.

For Wang Qingfeng, the PLC programming of CNC machine tools is no different from the basic operation. He has made up his mind. As long as Yunfei makes even a CNC machine tool run, he will fully agree to Yunfei's requirements.

As soon as the CNC machine tool runs, it won't be long before I spend 300000 on it. I thought I'd come back quickly. At that time, if I keep adding CNC machine tools, the money won't roll in.

"This baby has pimples. We must stay. We must do everything we can to stay." Wang Qingfeng has made up his mind since the moment he saw the cloud constantly entering the program.

Uncle Deng said that science and technology is the primary productive force. And the key is those who master technology. No one, everything is floating clouds.

Before Yunfei asked Wang Qingfeng to buy cigarettes, Wang Qingfeng's condition for leaving Yunfei had changed from giving Yunfei shares to marrying his daughter, who was just a freshman in his hometown in the northeast.

Seeing Liu Yushui's performance of Yun Fei, he has infinite regret and infinite melancholy. He knows that this baby pimple can't belong to himself.

A good bird chooses a tree. Its own pond is too shallow. However, he has gained a lot of knowledge by brazenly following him today. He has decided that even if their brothers smash the pot and sell iron, they have to go on CNC machine tools. At that time, let Yun Fei take time to be a master in his small factory.

Although it is not too difficult to control the ladder diagram program of the NC lathe in the 1980s, Yun Fei can write it quickly at the beginning, and the later he writes it more slowly.

An excellent software program can not only control the operation of machine tools. We must use the most concise program to control the most functions. In addition, we don't know much about the CNC lathe in the 1980s, so Yun has to keep recalling that the school in his memory is only a simulated ladder program.

Liu Yushui couldn't finish seeing Yunfei for a while. Hungry, he planned to ask Wang Qingfeng to eat something to cushion his stomach first, but Wang Qingfeng, who didn't understand but focused on Yunfei programming, refused. Seeing that it was getting dark outside, I had to find a way to go back first.