Chapter 10

"Numerical control of equipment is the inevitable trend of the development of China's equipment manufacturing industry. Now, except for those state-owned enterprises, there are no private enterprises engaged in research, manufacturing and sales in China. If we buy all our equipment from foreign second-hand equipment or simple CNC, the cost will not only be too high, but also not conducive to our future development. "

Wang Qingfeng, due to his limitations of the times, although he can predict the prospect of the NC machining industry, he has no idea of the most critical NC system of NC machine tools.

"Well, I said, Xiao Yun, why do you know so much when you are a little hairy child? I heard a lot when I was outside these days. My friends said that just two months ago, a CNC equipment company was established in Luogang. They mainly produce CNC systems. In the future, we can directly buy their CNC machine tools..."

"What? Huadu CNC? Is their name Huadu numerical control equipment Co., Ltd.? " Wang Qingfeng's words made Yunfei think of a company that shared the world with RB farak and German Siemens and occupied half of the domestic CNC system in his own time.

However, although it is in tripartite confrontation with farak and Siemens, the market share of Huadu CNC is all accumulated by the number of medium and low-end systems. High end CNC systems are monopolized by foreign companies. Others sell sets of high-end systems, and Huadu CNC has to sell hundreds or even thousands of sets.

No domestic high-end system is the eternal pain in the hearts of all robots in China! Especially those senior technicians, who use the all English system, how can they have fun! Who calls the country a late start and a weak foundation! You know, in the mid-1990s, there was no major in mechatronics.

You know, the main problem of CNC system is to combine machinery with electronics. There are a lot of mechanical talents, but there are few electronic talents with lanterns. Even if there are, they are not enough for state-owned factories. Where can private enterprises find these electronic engineers?

"Yes, but now there are only more than 20 people. It's not as good as our company. I originally planned to go to their company for a while and order several CNC machine tools if appropriate." Wang Qingfeng is a little curious. Yun Fei is such a child. He used to be in Shenzhen. How did he know such a small company?

Hearing Wang Qingfeng's words, Yun Fei couldn't help thinking of the information of the company he knew.

Although Huadu CNC has a lot of registered capital, it is now only a small regional factory with more than 20 people, and the CNC system produced is also an imitation of foreign systems. However, although there are few people, the output value is not lower than that of Qingfeng machinery factory. You know, a set of CNC system costs twenty or thirty thousand these days, which is not much different from an ordinary machine tool industry.

"Lao Wang, shall we also build CNC system? How's it going? " Think of the prospect of the CNC industry and the future market in China. If you don't jump on such a big cake and bite, it's hard to dispel your hatred.

If you don't eat this cake, foreigners will earn most of the profits of the CNC industry in at least ten years.

"Forget it, brother, let's do the processing in a down-to-earth manner. By the way, brother, you said you wanted to talk to me about the management of our factory. Anyway, it's off duty now. Let's go to the small shop next to us and talk while drinking. I'll call several responsible people in the factory." Hearing that Yunfei asked him to invest in CNC, Wang Qingfeng quickly changed the topic.

In recent years, there are many people who want to engage in CNC in China, most of whom have lost their money. Either they open a small factory to imitate the lowest end system of Germans or RB people.

It's the small factory just built in Luogang. It's said that it has invested millions of yuan. NND can buy hundreds of ordinary machine tools for millions of yuan. If the business is full, it will be hundreds of thousands a month. In case the numerical control system can't work out, it will lose everything and have no room to turn over.

Although he has seen Yunfei's machining technology and is very skilled in operating CNC machine tools, Wang Qingfeng doesn't think Yunfei, such a hairy child, can get the CNC system back. No matter how talented Yun Fei is, after all, his age is here. If such a hairy child has worked out the CNC system, how can those engineers who haven't figured out the direction for several years be embarrassed!

Originally, he just said casually. Hearing Wang Qingfeng's answer and seeing his reaction again, Yunfei was not a taste in his heart. When you think about it, it's human nature. He has been in contact with Wang Qingfeng for less than a month. On the surface, he trusts himself. If he puts all his wealth on a 16-year-old young man like himself, no one will be a fool.

After all, his current body looks only 16 years old, although can you believe that he is an engineer who will come to future generations to study Mechatronics?

Yunfei is still very familiar with the commonly used CNC systems in China. If we get the farak and Siemens systems ten years later, we can fully occupy the high-end market of this era.

Since Wang Qingfeng doesn't want to do this, it seems that he can only wait for the opportunity. When he has money, he goes out to do it alone.

When he thought of money, Yunfei thought of the first CNC system developed by Huadu CNC - hsk928. He had a deep understanding of this system when he was in school. There are heavy farak traces, but compared with the farak traces of knd series products launched by the third Electromechanical Research Institute of the capital, it can also be regarded as a domestic product. In this era, it is good.

Due to the limitation of industrial control chip, although hsk928 system has small storage space (24K, 100 programs), slow moving speed (fast moving 15000mmin, straight line 6000mmin, arc 3000mmmin), no macro program function, no thread clearance compensation, few subroutine calls and no electronic gear function, screw rod, driver, encoder and even machine tool structure are limited by the system, Its low price (a complete set only needs more than 10000, less than 20000) is still a quite good system for China, where the domestic CNC system is almost blank in the market. At least, it can meet the processing of some more complex parts.

Hsk928 system, the most criticized is not the system itself has many defects, but that it uses stepping motor instead of later servo motor.

Anyway, hsk928 will not be developed successfully until next August, so Yunfei is not in a hurry. During this period of time, we will straighten out the business of Qingfeng machinery and go to Luogang. If we can obtain a wide number of shares with the technology in our hands, it is the best. However, even if we can't, we should use this system to get our own starting funds.

In the evening, Wang Qingfeng took the leaders of several departments in the factory and sat at a big table in the small restaurant next to the factory. To tell the truth, it's the first time Yunfei has had dinner with the leadership of the whole factory for so long.

He is not good at social intercourse. He also knows that although the eating and drinking style is serious these days, it is still relatively simple in the factory. Wang Qingfeng, who works alone in Guangzhou, usually deals with it in the canteen like workers.

Although Yun Fei is not good at socializing, his drinking capacity is still good. After a few glasses of beer, he becomes brothers with the minds of various departments. However, as long as he mentions the company's management, not only the heads of various departments turn off the topic and are unwilling to mention it, but also Wang Qingfeng is unwilling to talk about it.

The wine made Yunfei depressed. I was in a bad mood. After a while, I was a little dizzy. After apologizing to the excited people, I left the small hotel and wanted to go outside.