Chapter 38

Yang Guang was confused by the prospect planning in Yunfei's mouth. Ten processing centers alone cost more than five million! Although Qingfeng machinery has a strong development momentum today, can the boss have such great courage?

The development of CNC workshop, Yang Guang these people are in the eye, almost every month is adding equipment! Almost all of these equipment entered Qingfeng Machinery Factory amid the complaints of boss Wang Qingfeng. Wang Qingfeng, who is not aggressive enough, can agree to Yun Fei's plan?

"Master, don't worry. I understand what to do." Yun Feihua has already said this. How can Yang Guang still not understand. Most of the skilled CNC technicians in the whole workshop are trained by Yunfei. When he came, he was already in the mode of old people with new people.

The reason why he didn't let ye Beichun, an apprentice with no foundation, operate on the computer was that his training mode came from the factory where he used to work.

Due to the original thinking mode, Yang Guang formulated the apprentice training plan in great detail. For the new apprentices, he asked the skilled workers with these apprentices to start teaching from the theory, wait until the apprentices have learned almost the theory, and then start to contact the machine tool.

In other words, during the month when Yang Guang managed the NC workshop, almost all the apprentices who entered the NC workshop did not work and paid for nothing.

Private enterprises are different from state-owned enterprises. The purpose of enterprises is to earn profits. It is impossible to spend a lot of time, energy and money to train apprentices. After all, in this era, with the rapid growth of the domestic economy, the development of the whole machinery industry is like a blowout. Countless new factories have been established. There is a great demand for skilled operators, especially those with good technology. A few years ago, many private factories spent a lot of energy to train their skilled workers, but unexpectedly, most workers left their old owners under the temptation of money.

Qingfeng machinery originally hooked up with many workers from other factories. Yunfei also had no good feelings for those workers who have no sense of belonging to the enterprise and are too mobile.

It is precisely because of this that Wang Qingfeng is particularly worried that the skilled workers trained by his factory will be lured away by other factories. At that time, his factory will make wedding clothes for others. Yunfei also has such concerns, so except for the first group, the latter workers only teach basic operation and no longer train programming.

In Yunfei's original world, many machining plants, especially NC machining, divide workers in great detail. Each factory only needs to ensure the stability of several technicians in programming and process design, and there is no attention to front-line operators at all.

The main work of the front-line operator is to clamp the parts to be processed on the Wang CNC machine tool, then press the green start button and wait for the parts to be removed after processing. Repeating these actions every day is basically equivalent to a cheap robot. Especially in factories that produce large quantities of products, a worker runs several machine tools. Anyone without the foundation of numerical control or machining can be competent for such a job after short training.

Therefore, any factory will not care about the resignation of front-line workers without any technical content. Yunfei's planning for Qingfeng mechanical NC workshop is basically operated according to this mode.

Yang Guang didn't come to Qingfeng machinery for a long time, so he's not very clear about this. In his idea, the workers who operate the machine tool must master the machine tool very skillfully, otherwise it will be a severe test for the service life of the machine tool. Especially for these precision CNC machine tools, if they hit the spindle a little, maybe the whole spindle will be scrapped.

The reason why the CNC workshop of Qingfeng machinery has developed so rapidly is that Yunfei, a person from later generations, knows the prospect of this industry. Out of his blind trust in Yunfei, although Wang Qingfeng had to complain for several days every time he bought CNC machine tools, he praised himself from time to time when he saw that the number on his company's account soared at the end of the month. At the beginning, he had a good eye and left Yunfei's arrogant child who asked to eat, smoke and smoke.

Although Yang Guang said he knew what he should do, Yun Fei told Yang Guang in detail about the grading system for operators in the NC workshop in order to liberate him from the cumbersome work of front-line machine operation faster.

Yunfei means that the top two technicians are Yang Guang and Wu Zhongda, who are responsible for the daily management of the whole factory, understand the needs of customers and handover with other departments; The second level is the process engineer who prepares the process of the parts to be produced according to the drawings and the NC machining process program; The third level is responsible for the debugging of NC machine tool processing program, completing the basic operations such as tool setting, grinding tools, first piece trial cutting, ensuring the processing quality of parts, and tool repair of worn tools in the processing process; The fourth level is the most popular ordinary operator.

Hearing Yunfei's description, Yang Guang's mouth was open.

In this way, the whole NC workshop does not need too many skilled workers. Because the main work of these skilled workers is to debug the programs prepared by the process engineers at the upper level, so as to liberate them from the front-line production and do not have to wait for one machine tool to finish processing and install another. Those workers engaged in front-line operation take over the work of these skilled technicians guarding machine tools.

Operating according to the cloud non mode, not only the processing capacity of the whole factory will increase a lot, but also the demand for skilled technicians will be reduced to the greatest extent, and the cost will be reduced a lot. After all, the salary of a skilled technician is at least twice that of a general worker who can't do anything.

For more than ten CNC machine tools of Qingfeng machinery, if there are two shifts, only four skilled workers are enough.

"Master, if so, we only need two skilled workers in each class. Aren't there too many skilled workers in the NC workshop?" To understand the benefits of this division of workers and work, Yang Guang was immediately distressed. After all, there are far fewer than four CNC technicians trained by Yunfei.

"This can't be counted as you think. After all, although our factory now says that there are many CNC machine tools, there are also many kinds. Another is that although there are many parts processed in large quantities in our factory, there are also many businesses for single piece and small batch of complex high-precision parts. If there are too few skilled workers, we can only give up these businesses that require high personal quality of workers. These workers are the basis for our future development and growth. Of course, there will be a lot of them. Therefore, we should choose those relatively stable workers for training. In the end, they have just been trained and have been poached by other factories. At that time, even if they want to cry, they can't cry. " Yun Fei explained to Yang Guang.

Now Qingfeng machinery has not reached the point of doing whatever it takes to save costs. After all, NC machining in private factories has just sprung up, and the profit of NC machining business is still very high, with little competition. Otherwise, Qingfeng machinery can not develop from two kinds of three dilapidated second-hand CNC machine tools to more than five kinds of more than ten now in more than half a year.

In Yun Fei's plan, before he left Qingfeng machinery, the number of WEDM machines in the whole factory should exceed 30. After all, the processing efficiency of this kind of machine tool is not very high, but it is cheaper. Many parts of Qingfeng machinery need this kind of machine tool which can only process flat surfaces. CNC lathes are the most important. After all, a large number of businesses of Qingfeng machinery are rotary parts, but there are dozens of ordinary lathes in the ordinary machining workshop. Therefore, the main task of Qingfeng machinery's CNC lathes is to finish turning large quantities of parts and processing complex single and small batches of parts, The number of CNC lathes is planned to reach 20 by the end of next year.

Because the price of machining center is too high, the price of one machining center is about to equal that of three CNC milling machines. The whole Pearl River Delta region is dominated by light industry, and the equipment manufacturing industry can not be compared with those heavy industrial regions. Therefore, in Yunfei's plan, there will be ten CNC milling machines. The machining center is the inevitable trend of the development of NC machining industry in the next 20 years. Although the price is expensive, Yunfei still plans to increase it to five.

These plans are all worked out by Yun Fei, who plans to submit them to Ye Qingfeng when they are summarized at the end of the year. He also knows that the funds needed for these equipment in his plan alone will exceed the total value of Qingfeng machinery and equipment. Yun Fei doesn't know whether Wang Qingfeng will agree to his plan. Anyway, the CNC system he copied from later generations has been basically completed. He will go to Huadu CNC after the Spring Festival. At that time, as long as it goes well, it's time for him to leave Qingfeng machinery.

This plan has not yet formed a written document, but there is an embryonic form in his heart.

The reason why Yunfei wants to submit it to Wang Qingfeng without certainty is just to repay Wang Qingfeng for his kindness.

Out of his understanding of Wang Qingfeng, Yunfei doesn't think how much development Qingfeng machinery will have after he leaves. However, even so, with the current processing capacity of Qingfeng machinery, as long as Wang Qingfeng is not too stupid, he can ensure a foothold in the era of extremely fierce competition in the future.

Since God has given himself the opportunity to come to this era, Yunfei is unwilling to waste this opportunity and wants to change the situation that high-end CNC machine tools are monopolized and blackmailed by foreigners in future generations.

After all, it is a shame for the whole machinery industry that a large country cannot produce high-end precision CNC machine tools. Yunfei wants to make the world's own domestic peers no longer disgrace, so we must start working hard now.