Chapter 102

Since Youjia is willing to provide these professional programming software and computers for free, Yunfei doesn't feel the extra tens of thousands of yuan. With a big hand, he signed the computer purchase contract on the annex to the contract.

Youjia did a good job this time. The three computers randomly equipped only received 70000 yuan from xinkaixing, and the genuine MasterCAM software was given away for free!

Yunfei wants to use the piracy of later generations. Many of the more pirated are sinicized. Most of the instructions are in Chinese. There is no need to force him to turn over the English dictionary while looking up the meaning of each command and learning the operation of software programming. Unfortunately, this is an era without a ferry aunt, and there are no network resources for the cloud to download.

However, the original genuine still has the advantages of the original genuine. At least, the original and genuine MasterCAM does not have to worry about instability, parameter setting errors and tool path changes. In the original world, the cloud has to use the whole software many times. Because pirated professional industrial design software and programming software will be damaged in some parts of the program, or the translation is not in place, which will cause problems in the compiled program.

These problems are not easy to check out. After all, many programs in future generations have tens of thousands of instruction segments, and there are even more than 100000 instruction segments for some complex parts, such as special-shaped cavity processing! If these programs have errors near the end of the completion, they can't cry! Therefore, in the original world, most enterprises engaged in precision machining or complex mold processing will choose genuine programming software.

Thus, in the Chinese mainland, where piracy is so rampant, the genuine industrial design and programming software still occupy a large market. After all, pirated software can only be used for learning.

Since the arrival of the machine tool will take a long time, Yunfei asked the other party to send the attached computer and software first. Just when the machine tool didn't come, Yang Guang, Wu Zhongda and several other programmers in the NC workshop were taught to use this software to program complex parts.

Soon, the computer was sent to xinkaixing's CNC workshop by Matt.

After waiting for a long boot time of several minutes, Yunfei almost dozed off. When he saw Yang Guang staring excitedly at the computer that Yunfei despised, Yunfei kept reminding himself: "I can't tell them that I once had a computer and started it in 25 seconds. More than 1000 GB hard disks are filled with people of all colors all over the world, Especially the love art action film of the devil country. You can watch these art action films and talk nonsense with the other end of the network who doesn't know whether it's a cat or a dog. By the way, you can always use your spare hands to PK your opponent in the game! "

Fortunately, the current version of mastercam4.3 is not as powerful as the version 9.0 used by later cloud, nor does it have abnormal requirements for computers like UGNX4.0 or other modeling programming software. Otherwise, Yunfei can only cry when facing the legendary garbage artifact with only 4MB memory.

Although the configuration of this computer has barely kept up with the requirements of MasterCAM software, it takes half a day to draw a straight line.

Yang Guang and Wu Zhongda have a good foundation in English. Yun Fei can't stand the fact that drawing a straight line can be stuck for half a day. Finally, when doing Boolean operation or post-processing on the finished graphics, the slightly more complex Boolean operation can make the garbage artifact card with a price of more than 20000 crash, After patiently telling them most of the commonly used drawing and programming commands, and then detailing the most important tool path parameters, let Yang Guang and Wu Zhongda play by themselves. He really can't stand the computers of this era.

There is no game, no user-friendly operation interface, no soft sister paper opposite the network cable, and a garbage artifact that is always angry and pretends to be dead. Yunfei is extremely lack of interest.

In the days waiting for the arrival of Youjia's CNC machine tool, Yunfei began to slowly focus on Huadu CNC. After all, that's part of the his career.

However, not long after Yunfei went to Huadu, he was scared by several people in qinqingshan and didn't dare to go again.

The prototype of lsk9201 has been manufactured. With the parameters given by Yunfei, the C series used in the lathe system began to be installed on the refitted lathe in Huadu NC Test Workshop for testing. However, for the X series used in the milling machine system, in addition to some common parameters of the two series, there are many independent parameters that need to be set inside while Qin Qingshan and others test. Even including various functions, they need to define this system!

As soon as Yun Fei goes, a few words can make several people busy for a while. However, Yun Fei regretted the first time he said what he had heard from later generations and was not sure. On that day, he was dragged by several old guys who worked hard and trembled but were extremely excited. After two o'clock, he vowed that he would never spend more money before LSK failed to complete the test and market, so he ran away in his Mercedes Benz.

He didn't want to be tortured to death by these old guys.

"Shit, it's not easy to find you now, boy. I'm tired to death, but you enjoy it here... Run to xinkaixing, they say you went to spend a few; He didn't even take a breath, but he reached the number of flowers, but he said he didn't know that your second boss hadn't appeared for a long time... "As soon as he entered uncle Yun Fei's ward of Jimin hospital, Ren Zhiguo opened his mouth to Yun Fei like a strong mechanism.

"Shit, you're only two!" Yunfei was angry when he heard Ren Zhiguo say he was the second boss! In this era, in China, most Chinese people are said to be two, and no one will say that cloud is not two!

"Aren't you two? Xin Kaixing, you are the second owner of the company, and you are the second owner of the company; In Huadu CNC, you are also the second largest shareholder and still the second boss! I said, "don't you admit that you are the second boss?" Ren Zhiguo doesn't know the meaning of two in the world of Yunfei. He didn't expect that this two, which made Yunfei very angry, didn't find the meaning of two on the Internet until he was told by a sister paper when he was wandering around the Internet to soak soft sister paper 20 years later. At that time, he thought of the scene with Yun Fei. He laughed and his eggs hurt too much for many days! At that time, he forgot to doubt. How did Yunfei know that two had such a meaning.

"Don't talk nonsense. I can't hide here for a few days." Yun Fei lies on Jiang Jianxing's hospital bed, crosses his legs, chews an apple and says to Ren Zhiguo.

"Come with me. Lao Zhao wants to talk to you." Ren Zhiguo said sincerely to Yun Fei. After all, Lao Zhao went too far last time.

"No, aren't you having a hot talk with Dirk company in West Germany?" Yun Fei asked in surprise.

Camart and Dirk company in West Germany are now talking about the procurement of four-axis CNC machine tools, but the other party's asking price is too hard, and Zhao Xingbang can't make up their mind at all. God damn it, the price is reduced to US $1.96 million and there will be no price reduction. This price is too painful for the military.

Speaking of this, Yun Fei was depressed. In his original world, democratic Germany and Federal Germany were unified as early as October 3, 1990, and the Berlin Wall was demolished long ago. However, I learned from Ren Zhiguo that although the Berlin Wall has been torn down in the world, the unification of the Democratic Republic of Germany and the Federal Republic of Germany has not been completed. More importantly, it seems that although the current Soviet Union has been in chaos, countless countries have declared independence, but the Soviet government has not announced the disintegration.

Well, in fact, Yunfei doesn't care about these issues. There is no merger between the Democratic Republic of Germany and the Federal Republic of Germany; The Soviet Union did not disintegrate. At most, the plan to let Yunfei's network Soviet workers work for themselves was blocked. However, Ren Zhiguo revealed that the country has been in chaos. Lao maozi has made a lot of good things in China. The drawings are transported train by train. Of course, countless experts engaged in cutting-edge technology research have also been secretly smuggled back.

What Yun Fei has been struggling with is that Xiaoping hasn't visited the South yet!

If Yun Fei remembers correctly, Xiaoping's southern tour was in January and February 1992. If xiaoping visited the south, the first special zone in China, the experimental field created by Xiaoping's circle, he could not have come to see the results. Moreover, Yun Fei is still waiting for Xiaoping to make an important speech on the southern tour.

In fact, the entire Chinese economy began to take off rapidly only after Xiaoping's southern tour speech. The state began to gradually let go of its control over the market, and China began to take the first step towards a real market economic system. If Xiaoping does not make a southern tour and he does not make a southern tour speech that has affected the whole Chinese economy for 20 years, Yun Fei still does not dare to do his own business.

Now, all history has become beyond recognition. But Yunfei doesn't care very much.

Xiaoping has always attached importance to the development of science and technology, and put forward the view that science and technology is the primary productive force. In the original world, during his southern tour, he visited many high-tech enterprises in the special zone, such as sacred things, pharmaceuticals, electronic communications and software companies

How much capital would it be if we could find a way to lure Xiaoping to Huadu CNC and xinkaixing for a visit? At least, when Xiaoping does not die, the development of Yunfei will not be subject to any restrictions.

Yunfei has decided to let Huashu start building momentum now. It's best to let everyone in China know this! Let all the Chinese know that the Chinese have come up with the first set of their own CNC system, and it is still a medium-grade CNC system that can control the machining center for three-axis linkage.

If so, we can't lure Xiaoping to Huadu CNC. Yunfei can only accept his life and develop slowly with peace of mind.