Chapter 211

For the lathe price of more than 110000 to 180000, few customers will feel that the CNC lathe produced by 91 heavy industry is not worth the price.

The grades are different. Of course, the price can't be the same.

You know, the price of imported CNC lathes with the same gear is basically between 160000 and 240000! There will be no choice.

Not to mention anything else, take the tool position of the rotary tool holder. The vast majority of CNC machine tools imported from abroad are ordinary turret tool holders with only four knives. In processing some parts with complex processes and high precision requirements, CNC lathes with ordinary tool holders with only four knives at a time simply have no way to clamp workpieces at one time, Or install enough tools at a time to process the parts.

In this way, only Division of labor can be carried out.

People who do machinery know that the more complex the design of products, the higher the accuracy requirements. If you want to process the product to meet the design requirements, it is required to ensure the machining accuracy in the production process.

The production of large quantities of parts is good. If it's a big deal, just make a few sets of tooling with high precision, but not for small batches. The higher the precision of the product, the higher the precision of the tooling. The higher the tooling accuracy, the more difficult it is to design. The more difficult it is to design, the more difficult it is to process. Finally, it reflects the high tooling cost.

Especially in the whole Pearl River Delta gradually emerging mold industry, their requirements for CNC machine tools are more abnormal.

Simple cold stamping dies are OK, but for those plastic molds and precision casting molds with high precision and complex curved surfaces, there is no way to make precision molds that meet the design requirements without high-precision processing equipment.

Although the accuracy of imported CNC machine tools can be guaranteed, the price is a little too unacceptable, especially each one has to be paid a large amount of import fees by those agents. Now the CNC lathe produced by 91 heavy industry gives them hope.

Mold production belongs to single piece and small batch production. The machining accuracy of many parts is very high, especially for some key rotary die parts, the CNC lathe with multi tool position turret tool rest is needed to ensure various matching tolerances and geometric tolerances of parts.

The chuck and multi tool holder controlled by the hydraulic system only used in foreign medium and high-grade CNC machine tools by Jiuyi heavy industry not only do not need to pay the agent agency fee, but also the price is cheaper than foreign CNC machine tools. Although the production quality of these CNC machine tools may not be more reliable than that of imported machine tools, Jiuyi heavy industry has an office in Huadu, and several professionally trained maintenance personnel are on standby!

"Director Jiang, when will our ten beds in xinkaixing arrive? It's been waiting for more than two months. Both bosses told me that when your equipment was not market-oriented, you had mobilized 10 CNC lathes from the first 50 CNC lathes sent to Huadu for xinkaixing. Won't you intercept them? " Zhou Bin, the factory director of xinkaixing, is now asking Jiang Jianxing, the person in charge of the sales point of 91 heavy industry in Huadu.

"Lao Zhou, this train is not from our family. We don't want it to be transported quickly. Wait a minute... "Jiang Jianxing said with a guilty face to the director of the machining plant, which also holds a large number of shares.

Originally, Jiang Jianxing was appointed as the purchasing director by Yunfei, but at the beginning, Jiang Jianxing went to various factories producing mechanical parts along the coast and promoted the machine tools of Jiuyi heavy industry, so in the end, he simply put aside the improper purchasing director. Instead, he applied to Yunfei for Huadu, which made him suffer a lot and suffer a lot of crimes, The drunken city became the head of a small sales point.

Of course, he also has to be responsible for the procurement of some electrical products of Jiuyi heavy industry here.

Many electrical equipment can be used on a CNC lathe. If only relying on the more than 100 people in the current electrical production workshop of 91 heavy industry, it is impossible to produce hundreds of electrical equipment. Many things can not be mass produced with technology.

"Don't tell me the train is late! Don't think I didn't know you sold the CNC lathe that should have given us xinkaixing! Either you give me ten today, or I'll call boss Yun Fei and ask him to comment on this reason! What we produce at home is not used by ourselves, but sold to our competitors! " As soon as Zhou Bin heard Jiang Jianxing's words, he was not angry.

Xinkaixing has now focused on the manufacturing of shoemaking equipment from the processing of single parts and components.

In Huadu, the labor price of the whole machining industry has been reduced by several percent. Under the telephone guidance of Yunfei, xinkaixing has shifted all its focus to the business of NC machining. At present, the precision machining workshop of xinkaixing has more than 40 CNC lathes, more than 20 CNC milling machines and machining centers. With EDM, wire cutting and other equipment, the number of CNC machine tools has exceeded 100.

In the whole Pearl River Delta, xinkaixing has become the machining factory with the largest NC machining capacity.

From the beginning, when Wang Qingfeng called and said that he had ordered ten CNC lathes that were more advanced than foreign imports and could install ten knives at a time, Zhou Bin was excited.

Now xinkaixing is not what it was a year ago. At that time, basically all kinds of businesses will follow. Now xinkaixing's ordinary machining workshop has been reduced to a workshop dedicated to rough machining, and even many machining businesses with low production accuracy and small production batch have been indicated by the cloud, Transfer those businesses to Yu Deshui, who already has more than 20 machine tools of various models.

Zhou Bin has been the factory director of xinkaixing for more than a year, but few people think that the reason why xinkaixing has developed to the present level is due to his efforts. Many people believe that the development of xinkaixing to the present level is the foundation laid by Yunfei, the young old factory director.

Therefore, when he found the prospect of the mold industry, Zhou Bin called Wang Qingfeng several times, asked to set up a special mold workshop in xinkaixing, and personally sent a list of CNC equipment applied for procurement to Chengdu.

When I first saw the purchase list, Wang Qingfeng, who always regarded himself as a nouveau riche, was frightened by the total price of the equipment listed above!

The price of three four axis four linkage machining centers is 25 million; The machining centers of five Taichung precision machines are 5 million, and ten German mid-range CNC lathes are 3.2 million

All kinds of equipment add up, the total price of the purchase list exceeds 35 million!

Finally, after Wang Qingfeng told Yunfei Zhou Bin's idea, he didn't expect Yunfei to strongly support him. However, three four axis machining centers were changed into one, five machining centers became three machining centers, three CNC milling machines and ten CNC lathes were directly crossed out by the cloud.

After the finalization of the 6132 CNC lathe of Jiuyi heavy industry, the first batch of 50 units were sent to Huadu, of which 10 units were assigned to xinkaixing.

"Well, Lao Zhou, it's not good to disturb the boss for such a small matter. You know, my boss is also your boss. It's meaningless for us to earn our own money, isn't it? Anyway, there will be some sooner or later. Wait... "Jiang Jianxing doesn't want such a small thing to make Zhou Bin noisy in front of Yun Fei.

If that's the case, I will definitely be transferred back to Rongcheng by Xiaoyun. In that case, I will

"I don't care what you say, another 30 sets have been sent here this time. I don't care who you intercept from. Anyway, I won't leave without a bed..." Zhou Bin won't agree with Jiang Jianxing to intercept the equipment that should have been xinkaixing to other manufacturers.

Now not only do the foreign trade products of the original old customers, a guy in the business department has helped to get a lot of products that large machinery companies in Germany and the United States are unwilling to make themselves because of cost problems through a relative abroad.

If possible, Zhou Bin even hopes to add ten more CNC lathes.

Now there are more and more businesses in the whole factory. Many high-precision products are made with ordinary CNC machines in those workshops, which is too inefficient.

"Five, five at most..." after some bargaining, Jiang Jianxing can only helplessly give a slap.

Zhou Bin discontentedly pulled five CNC machine tools back to xinkaixing.

"Manager Jiang, isn't it unkind of you to do so? We agreed at the beginning. Why is there only one of the three CNC lathes that should have been given to me now? " A big bellied middle-aged man pointed to Jiang Jianxing and shouted discontentedly.

"Oh, boss Zhu, as you know, our Jiuyi heavy industry is just a small factory with only a thousand people, and the production capacity is insufficient. The three CNC lathes with the highest configuration you want have a long production cycle, and the assembly needs the most experienced nine level pliers. Our factory has more than ten level-9 fitters. Up to now, we can only assemble more than 20 CNC lathes with the highest accuracy level in a month... Boss Zhu, I have just arrived at several 6140 simple CNC lathes with 1m guide rails. The price is the same as that of a standard 6132 machine tool. Do you want to? " Jiang Jianxing can't explain to boss Zhu of Jianyu machinery company, who began to come to the door to urge for CNC lathes since the first batch of machine tools were transported to Jiuyi heavy industry.

This guy, who is also engaged in NC foreign trade processing, has a daughter who goes to Krupp Institute of technology in Germany and has done him a lot of good work. Therefore, the demand for CNC lathes has never been met. In particular, these goods often help people engaged in CNC lathes.