Chapter 242

After the security guard took Yang Guang and Zhou Bin out of the office, Yun Fei's whole body strength was taken away and collapsed powerlessly on the chair.

Human desire is too difficult to grasp. Zhou Bin and Yang Guang have an annual salary of more than 80000, but they are still not satisfied. The betrayal of the two people in xinkaixing that most attracted Yunfei's attention made Yunfei confused. There was no connection except for work. Who connected them?

There must be a factor of interest, but it is definitely not the main factor. Otherwise, now the vice president of Chengdu Jiuyi heavy industry should be Yang Guang, not Wu Zhongda. However, this may also be the problem of Yang Guang's vision. Why can only Yang Guang tell Yunfei.

"Brother Yunfei..." seeing Yunfei's appearance, Ni Lishuang didn't know whether to comfort him or ask Yunfei to answer his doubts.

"Frost, don't worry, I'm fine. It seems that we can't go back to Rongcheng in a short time. You call old Mao four, inform Wu Zhongda and tell him about our situation... "Yun Fei squeezed out a smile when he saw the worry on Ni Lishun's face.

The current situation of xinkaixing can be said to have been caused by Yunfei himself. His existence gave the factory director a highly centralized right. After leaving, because he simply believed in one person, he did not take measures to limit the factory director's right. In the past year, he didn't even go to Huadu at the end of last year because of Jiuyi heavy industry. Even if he received xinkaixing's financial statements, he just glanced at them and put them aside.

Wang Qingfeng, the largest shareholder, is also implicated by Chengdu xinkaixing. He often runs between Chengdu and the mountain city. At the end of the year, he has to go back to his hometown in the northeast to accompany his family, especially Zhang Rui, who gave birth to a daughter. In the northeast, his daughter and Zhang Rui are in the same boat. Wang Qingfeng simply doesn't have enough time and energy to manage xinkaixing. When the shopkeeper gets used to it, how can he kiss like when there was no cloud before? Xinkaixing is guarded by a group of his old brothers. He doesn't think there will be any problems.

"Brother Yun Fei, those CNC lathes are no different from the CNC lathes we produce. How did you find out?" Yunfei just called Wu Jianguo and Yang Dezhi back, lit a cigarette and thought about where to find professional managers to manage xinkaixing. Ni Lishuang asked her doubts. She really couldn't hold back.

"Shuanger, you don't do this, so in your eyes, these beds are no different from the CNC lathes we produce. If you only look at it from the appearance, you can't see it, even I can't see it. The CNC lathe we produce, except the ball screw, is produced by ourselves. Other key accessories are also imported. We can't see it without opening the machine tool! " Yun Fei explained to Ni Lishuang.

If he hadn't been here, Wang Qingfeng, who didn't know much about CNC machine tools, wouldn't have found the fishiness here.

"How did you see that?" Ni Li Shuang wondered if Yun Fei couldn't see it himself. How did he find out that the CNC lathe in the workshop was not produced by 91 heavy industry?

"If Yang Guang says that these equipment are idle because the processing business is not full, I will not move those equipment. Most of the precision processing businesses of xinkaixing are through the processing of foreign trade parts and military precision processing products in the hands of camart. Most of them are the businesses I talked about when I was the deputy director of this factory. For these businesses, He knew I knew, so he could only answer me that all these equipment were in addition to problems. " Yun Fei's face gradually returned to normal.

If I returned to the factory this time, I didn't see that the few people I placed in the whole factory had disappeared. In addition, the whole production workshop was completely lack of management. Yun Fei wouldn't think that Zhou Bin and Yang Guang could join forces to steal and sell the medium-grade CNC lathe transferred by the company's 91 heavy industry. These lathes are top-level and middle-grade lathes. In the market, the price is more than 170000!

"In addition to a few domestic factories that use the Dragon CNC system of Huadu CNC, many are FANUC systems imported from Japan or Siemens systems imported from Germany. Since they want to imitate the CNC lathe of 91 heavy industry, people can't see the problem, so they can only use the Dragon CNC system produced by Huadu CNC. But they don't know that the most critical part of the CNC lathe of 91 heavy industry is actually on the system. "

The CNC lathe of Jiuyi heavy industry, which changes the 8-bit chip into 32-bit chip, has only slight differences in the startup interface and operation interface. It is not a special professional, so it can't be found at all. Because the reformed system has no difference from dragon CNC in all control codes, programming formats and tool setting methods.

The system refitted by Jiuyi heavy industry is very different in the parameter setting of the machine tool.

In addition to some of the machine tool parameters set by the manufacturer of the NC system, some of the most machine tool parameters, such as mechanical origin, maximum speed limit of the machine tool and maximum moving speed control, are set by the machine tool manufacturer. To enter these parameter setting interfaces, it is impossible to get the password if you are not a key technician of the machine tool manufacturer.

The parameters set by the machine tool are the ultimate trump card of NC machine tool manufacturers. If the equipment sold has problems in parameter setting, the machine tool manufacturer would rather spend a higher cost and send professional parameter setting personnel from the company to the customer's workshop than tell the customer to enter the password of the most basic parameter setting interface. The more high-grade CNC machine tools, the more high-precision CNC machine tools, those parameters become more and more important.

These parameters have been explored through countless tests.

Yunfei provided a large part of the setting parameters of the Dragon CNC system, and Yunfei personally led the commissioning of the CNC lathe of the 91 heavy industry. When the system is turned on, as soon as the machine tool runs, you can know what the problem is.

"The maintenance of CNC machine tools often involves the modification of parameters. When I started the machine tool, I found that there was no problem with the system. After entering the parameter page, I found that these systems were not ours. Finally, when I looked at the machine tool number at the end of the guide rail, which was not easy to notice, I found that there was no special number of our 91 heavy industry. In the same way, I found that these CNC lathes are not manufactured by our Jiuyi heavy industry, but those produced by other factories. In terms of machining accuracy, there is no way to compare with our machine tools. The main business of xinkaixing's machining is either military products, foreign trade workpieces of German IDG and EMG companies, and some processing parts from the United States, The business of these companies requires not only high precision, but also high appearance quality. CNC machine tools produced by other domestic machine tool factories can't make these parts at all! To buy imported CNC lathes that can do these jobs, even second-hand ones, cost more than 150000. Now that we can produce such equipment, why should we let others earn our money in vain? " Yun Fei explained to Ni Lishuang while thinking about the whereabouts of those CNC lathes.

Ni Lishuang doesn't know much about NC machining. After listening to Yun Fei's words, he still doesn't understand.

"Brother Yun Fei, if you say so, how can the company complete these businesses?" Ni Lishuang grasped the key point.

There were not many CNC lathes that could be used for foreign trade products of IDG and EMG companies. Otherwise, Yunfei would not transfer the output of 200 units per month to xinkaixing 20 units when the market demand is huge.

"That's another problem. Now, the profit of foreign trade processing business in NC industry is far higher than that of domestic machining, especially for the business with high difficulty and high precision. Within two years, xinkaixing has developed from a small factory with only 30 or 40 ordinary machine tools and 60 or 70 people to a machining workshop with more than 400 people, close to 100 CNC machine tools, all because of doing CNC machining business. When we were Qingfeng machinery, we made the first batch of thin-walled stainless steel parts. Regardless of the cost of machine tools, the labor cost was only less than 150, and the processing cost of each product was more than 1000. Moreover, tens of kilograms of stainless steel chips also cost hundreds of dollars. How much profit do you say there is? Since they replaced these CNC machine tools with some garbage CNC machine tools, they must give these processing businesses to the processing plant that got the equipment. Under the full start, the cost of the machine tool will come back in less than half a year! " The cloud doesn't know much about the fishiness in the middle.

"They are borrowing chickens to lay eggs!" Hearing Yunfei say so, Ni Lishuang finally understood.

Zhou Bin, they put these advanced equipment outside, and then buy some equipment with low precision from outside. Xinkaixing will certainly not be able to produce products that meet customer requirements. If the company wants to deliver goods within the period required by customers, it must outsource these products to processing plants with strong processing capacity.

"So is the purpose of changing those processing centers?" Ni Lishuang finally understood why Yunfei first went to camart to copy the equipment transaction list between camart and xinkaixing in the past year.

Zhou Bin, since they even dare to replace the CNC lathe generated by Jiuyi heavy industry, they will certainly replace some of the new machining centers they bought. In this way, they can get more processing business transferred through camart, and their profits will exceed xinkaixing in a short time. Because xinkaixing's equipment has been reduced to their rough processing factory.