Chapter 413

On the West Lake, outside the building.

"The wind and moon on the first floor should be drunk, and the Ten Mile Lake and mountain should be drunk." this couplet says that this building outside the building, which is famous at home and abroad for "eating delicious food and beautiful scenery", is said to have a history of 150 years.

Unfortunately, the Leifeng Tower fell down.

"Brother Chengfeng, you're late..." on the third floor of the building, where the minimum consumption is tens of thousands, a bald middle-aged man stood outside the private room and looked at the stairway from time to time. When he saw a short and fat man with a young and bright woman a head higher than him on his arm appear at the stairway, he hurried to meet him.

"Brother Ziqing, it's not that I came late, but that you came too early. By the way, Peng has arrived?" The man called brother Chengfeng smiled and said calmly to Wang Ziqing.

"It's already here. Others are not like you. You can't attract you even the famous dishes that have been handed down for hundreds of years in the outer building that is famous at home and abroad for uncle Zhou jiugu..." Wang Ziqing glanced at the woman beside Wu Chengfeng.

This woman is the best.

The woman holding Wu Chengfeng's arm, when Wang Ziqing glanced at her chest, not only did she not pinch, but deliberately shrugged her chest. By the way, she gave Wang Ziqing a wink, who was unwilling to take her eyes away from her side.

"Mr. Peng, I'm sorry to have kept you waiting. The scenery of the West Lake is really good... "As soon as Wu Chengfeng entered the door, he saw Peng Zhi, who was staring at the night view of the West Lake outside the window and holding a cup of tea in his hand, turned his head and smiled at him. His old face was red.

"The scenery of the West Lake is good, but it is far less attractive than the beautiful women around you?" Peng Zhi, who is in his 60s, just glanced at the beautiful woman next to Wu Chengfeng, who belongs to the best in both appearance and body. He turned his eyes to the window again, gently sipped a cup of tea in his hand, and said to the window.

"Mr. Wang, are all your guests here?" When the white and beautiful waiter in cheongsam saw that the guest's reservation was more than ten minutes late, he couldn't help but eagerly came forward and asked.

With the influx of countless foreign-funded enterprises throughout the Yangtze River Delta and the rise of local tyrants, the business of buildings outside the building is becoming more and more popular, especially on the third floor with a minimum consumption of no less than 10000 yuan, there are only four private rooms in total. If you don't book in advance, there is no place at all.

Even if the reservation is made, the time of each table is generally specified, because there will be many people waiting behind them without reservation.

These are all money!

"Serve!" Wang Ziqing nodded to the waiter.

"Come on, Little Joe, let me introduce you. This is Peng Zhi, President of Wanyou CNC group, the eldest brother of Taiwan CNC machine tool industry; This is Wang Ziqing, chairman Wang, who has just separated from Taichung precision machinery and invested in the mainland to establish Taiyu CNC machine tool company. President Peng, this is Qiao Dantong from Xiangjiang, the newly appointed president assistant of Dingsheng CNC mainland headquarters... "Wu Chengfeng first introduced Peng Zhi of Wanyou CNC and Wang Ziqing of Taiyu to Qiao Dantong, and then introduced Qiao Dantong to two old goods.

Among the three Taiwan funded enterprises that set up factories in the mainland almost at the same time, Dingsheng CNC controlled by Wu Chengfeng was the most powerful, but Wanyou CNC suddenly received capital injection from Japan, and Taiyu, the worst, also received mysterious capital injection, making his Dingsheng the worst.

It is said that the remaining CNC machine tool factories in Taiwan are also seeking to build factories in the mainland, but they have not been approved by the board of directors.

"Mr. Peng, these are the most famous dishes outside the building, such as west lake vinegar fish, beggar's chicken, Dongpo meat, West Lake Ulva soup..." shortly after the dish was served, Peng Zhi didn't eat much, so he put down his chopsticks.

This surprised Wang Ziqing, the host of today's treat.

Isn't Peng Zhi the best food?

Even these famous dishes have no appetite!

"Are you still in the mood to eat? At present, none of our three factories has started production, and all the small machine tools in our hands have been thrown into the Chinese market. Didn't you think that when you first did it, it would arouse the vigilance of Jiuyi heavy industry, a newly rising local enterprise in the mainland? " Peng Zhi has no appetite at all in the face of a full table of rich dishes.

The Chinese mainland China's investment in factories has only just begun. Soon, if we wait until we have independent production capacity, we will have to wait until next year, especially when we talk about investment agreements with the West Lake municipal government. The other party asks them to recruit eighty percent of the workers in mainland China.

"Mr. Peng, I'm sorry. It's all my fault. As soon as I heard that the order of Jiuyi heavy industry was three years later..." it was Wang Ziqing's fault that invited the bosses of the two competitors to dinner today.

Although it's a competitive relationship, it's also a friend for many years, isn't it?

Taiwan is not big, but there are many enterprises producing CNC machine tools. The narrow Taiwan market makes many CNC machine tool manufacturers simply can't eat enough.

Therefore, even if it is a competitive relationship, in order to survive and earn more profits, these enterprises have a lot of cooperation while competing.

If this were not the case, Taiwan's CNC machine tool factories would not be able to resist the pressure of CNC machine tool manufacturers in Europe, America and Japan.

All Taiwan CNC machine factories know that the Chinese mainland is unable to produce CNC machine tools because of its rapid development. The economy is stimulating the machinery manufacturing industry. More and more production tasks do not have enough skilled workers. In addition, with the rapid development of manufacturing industry and other scientific and Technological Development in the mainland, the requirements for mechanical manufacturing technology are higher and higher, and the mainland needs a large number of CNC machine tool market.

Whether in Europe or America, there are powerful CNC machine tool manufacturers. In Asia, there is also the pressure of Japan, a technologically developed country. Since its establishment in the 1980s, Taiwan's CNC machine tool factory has sought development under the pressure of CNC machine tool manufacturers in Europe, America and Japan. Through more than 10 years of development, it has not been easy to obtain the production technology of medium-grade CNC machine tools from the Japanese masters, hoping to make use of cross-strait relations for greater development, but it has found that, The mainland actually has manufacturers of CNC systems and CNC machine tools.

The accuracy of this CNC system and CNC machine tools is no worse than them, so they have to invest in the construction of assembly plants in the mainland without sufficient preparation.

From the same ancestor, they deeply understand that no country in the world has such strong regional protection as the mainland.

Although officials and people on the mainland have always stressed that Taiwan is the territory of the mainland and an inalienable part of it. However, different political systems and different camps make the mainland very wary of Taiwan.

Although the biggest source of CNC machine tools in the mainland is Taiwan's CNC machine tool factories, that is because they do not have the ability to produce CNC machine tools in China.

Once the mainland has its own CNC machine tool production capacity, they will definitely vigorously support this industry related to the whole cause of national defense. Now is the most obvious example. The mainland used to import CNC machine tools with an increase of dozens of percent every year, but after the CNC machine tools of 91 heavy industry were listed, the import business of CNC machine tools in the mainland immediately decreased sharply.

Under the contact of Taiwan machine tool Federation, some powerful CNC machine tool factories are ready to invest and build factories in the mainland and seize the mainland CNC machine tool market under the brand of made in China.

If the mainland wants to develop and catch up with the United States, it must vigorously develop industry.

CNC machine tool industry is the key to the progress of machinery manufacturing technology.

Wang Ziqing, who first came to the mainland, saw that the mainland market was about to be monopolized by Jiuyi heavy industry, which had not yet studied the three-axis machining center. Although they were essentially Taiwan machine tool factories, it was not easy to compete with Jiuyi heavy industry.

After all, the mainland's top management is very exclusive of Taiwan funded enterprises.

Therefore, in order to seize part of the market before the development of three-axis CNC machine tools by Jiuyi heavy industry, Wang Ziqing joined hands with the mainland leaders of Taiwan machine tool factory, which was also preparing to build factories in the mainland, and invested all their machine tools in the mainland market.

As long as any enterprise has developed a CNC milling machine and solved the manufacturing technology of three-axis machining center, it will not take long. Although the technical complexity varies greatly.

As long as the three-axis machining center is produced, the problem of machine tool accuracy will be solved gradually.

On the surface, Jiuyi heavy industry is a private enterprise, but its predecessor is a branch of the military base deep in Daba Mountain, with a deep military background.

Having a military background means that Jiuyi heavy industry can easily get the support of China's major research institutes through the military. On the surface, China's technical research in machinery manufacturing is not strong, but that is because there is not enough financial support. It is difficult for poor and large countries to allocate small funds to all industries.

All along, China, which belongs to the red camp, has a weak foundation. In addition, after ten years of turmoil, it began to carry out various infrastructure construction to develop the domestic economy. There is simply not enough research funds to undertake the research in the field of high-precision and cutting-edge weapons, and then invest a lot in the manufacturing technology of CNC machine tools.

In order to avoid the huge pressure on these foreign enterprises caused by the rapid development of Jiuyi heavy industry, Wang Ziqing, together with the mainland heads of several companies, invested a large number of CNC machine tools stored in the company into the market, making the mainland CNC machine tool market tend to be saturated in a short time.

In this way, as soon as the orders of Jiuyi heavy industry fall, their pace of expanding production scale will gradually slow down. At the same time, the lack of profits and research funds will also slow down their research progress, so as to win enough time for their machine tool manufacturers from Taiwan to complete the infrastructure construction.

"Things have happened. The problem we should solve now is not who is at fault here, but we should find ways to solve the problems we encounter at present." Qiao Dantong sipped the legendary West Lake Ulva soup while winking at Wang Ziqing, but what he said was to Peng Zhi.

Hearing what Qiao Dantong said, Wu Chengfeng, who had just stuffed a piece of Dongpo meat into his mouth, almost choked to death.

It's said that women have big breasts and no brains, but I didn't expect that the women who hook up soon will take themselves seriously.

If the woman hadn't given him too much fun he hadn't had in his life, he would definitely slap the woman into the West Lake.

"Oh, Lao Wang, why are you pulling me? Am I wrong? The 91 heavy industry is just a small factory in Chinese mainland. What's more, the monthly production capacity is only more than 200 CNC lathes and twenty or thirty CNC milling machines. There is no strength at all. Do you have to pay so much attention to it? " Qiao Dantong learned a lot about Jiuyi heavy industry through the company's information.

"Hehe, is that so? Xiao Wu, it seems that you Dingsheng CNC have found a very excellent president assistant! " Peng Zhi gave Wu Chengfeng a mocking look and asked Qiao Dantong, "Miss Qiao, I wonder if you can help us analyze that our enterprises compete with China's local enterprises. Where are our strength and advantages?"

Although Qiao Dantong has a diploma from Xiangjiang University of finance, she doesn't have much ability at all. Otherwise, she won't hold the ugly Wu Chengfeng from Taiwan after mixing in the mainland for several years, let alone go to Wu Chengfeng's bed.

Her ability is just in bed.

But now the richest old guy in Taiwan's CNC machine tool factory asked her to help analyze, and she felt that she had a chance. If her answer satisfied the old thing, she would have more contact with the old thing in the future. When he returned to the west, the huge family property would be hers.

Peng Zhi has no descendants. She knew it not long after she slept with Wu Chengfeng.

A woman without a mind can't see the increasingly obvious sarcastic smile on Peng Zhi's face.

"Our enterprises have huge productivity in Taiwan. On the mainland, they just set up assembly plants. Without much scale, they can easily produce hundreds of CNC machine tools in a month. Besides, we are registered in China, but neither capital nor technology can be owned by Chinese mainland. During my years on the mainland, I know very well about the blind worship of mainland officials and private bosses for imported technology. " Although I got this well paid job by relying on my body, if I didn't have a few brushes, I couldn't become the president assistant of Dingsheng CNC in the Pearl River Delta special zone.

"In order to compete with us, not to mention the technology, it is impossible for many Chinese officials to believe, but their production capacity is their hard wound. If they want to expand the scale of production, they must constantly expand all departments... "

Qiao Dantong said more and more vigorously, but he didn't see Peng Zhi's increasingly upturned mouth full of ridicule.