Chapter 620

"Uncle, what about those factories in the Northeast?" Jiang Jianxing has just returned from the northeast. Before he went to find Yunfei, Yunfei came to the door by himself.

After the completion of this large-scale acquisition, Jiuyi heavy industry will become the largest machinery manufacturing group in China.

Such huge productivity will give many competitors a headache at that time.

"The information has not been sorted out yet. Yun Fei, I think we must reduce the scale of acquisition, otherwise old man Mellon can't pass. We are likely to be dragged down by those factories. Only a few factories upgraded their equipment in the early 1990s, and most of them are still some production equipment in the 1960s and 1970s, There were few in the 1980s... "Jiang Jianxing told Yun Fei how he felt about his visit.

Many of these state-owned factories are equipment imported from the Soviet Union in the 1960s and 1970s or produced by China itself based on Soviet assisted technology.

"I know that in two years, the land of these factories will be worth more than that. If we want to develop in an all-round way, we can't just rely on our Jiuyi heavy industry. " Yun Fei frowned.

But what Jiang Jianxing said is the fact that although the price given to them by the state is very cheap, in order to optimize the production capacity of these plants, the equipment of these plants must be upgraded on a large scale.

The equipment of the 1960s and 1970s can certainly be used. However, the state of technology simply can not adapt to modern large-scale production. The production efficiency is low and the cost is high. Many state-owned factories in China are made by manpower and time.

Therefore, in the face of the reform of market economy, most state-owned enterprises have become unsuitable.

The rigidity of the system is a problem, and the production cost is the biggest problem.

"If we reduce the number of acquisitions, leave half of the funds for the upgrading of technical equipment of those companies and choose products in line with the market, as long as we no longer keep a large number of redundant staff and maintain the efficiency level of our Jiuyi group, we can turn losses into profits soon!" This is what Jiang Jianxing has considered most these days.

At present, the development of Jiuyi heavy industry has entered the bottleneck area. The demand of NC industry is large, and the production capacity of Jiuyi heavy industry can not keep up. If more outsourcing supporting units are developed, management is the biggest problem.

The cost of expanding and building a factory is too high.

Moreover, it is impossible to obtain a large number of skilled workers. Without a large number of skilled workers in a new plant, it will take a long time to form a mature production capacity.

What the 91 group needs most now is time.

Foreign CNC manufacturers are about to enter the Chinese market. Yunfei has received clear news. The Fifth China national machine tool exhibition to be held in the capital in late November has five CNC equipment manufacturers from Germany, Japan, Switzerland and Italy. They will take their five axis machining centers to the exhibition!

These large international CNC equipment manufacturers must have reached an intention agreement. First, they sell their five axis machining centers with low accuracy to Chinese users to seize China's high-end user orders and prevent the development of 91 heavy industry.

Jiuyi heavy industry has the production capacity of four-axis machining center, and it is still industrialized mass production!

How can this not make their eggs hurt?

It has been blocking China's development in these high-precision and cutting-edge fields. Now it's good, because China's large demand for equipment in this field makes Chinese enterprises have their own production capacity and accumulate R & D experience. How can they not panic!

"Take a look first, uncle. You can discuss this with old Mellon and them. We can do as much as we can, otherwise, our large-scale acquisition will not become our opportunity, but will drag us to death... "Yun Fei nodded.

Still not enough money.

If the funds were sufficient, they would not give up such a good expansion opportunity at all.

Once those large machinery groups in China, such as northeast one machine, capital one machine and so on, all annexed many machinery factories of the same type at this time, so that they can develop so rapidly and become one of the top 500 in the world in a short time!

However, in this world, they have no such expansion ambition.

Jiuyi heavy industry is a roadblock across the expansion path of all Chinese CNC equipment manufacturing enterprises. If you want to expand, you must grab the market from Jiuyi heavy industry! Although they have the production technology of Jiuyi heavy industry, the market of three-axis machining center is still unable to compare with the whole Jiuyi heavy industry.

The efficiency of the 91 Research Institute, the largest non-governmental scientific research institution in China, is unmatched by any Chinese enterprise.

No enterprise dares to invest in scientific research like Jiuyi heavy industry.

There is also an advantage that many enterprises do not have in the hands of the 91 Research Institute - the CNC system is used on the CNC equipment produced by the 91 heavy industry, which is independently developed by them.

Only their own research and development, in order to make their own production equipment to achieve the highest design accuracy!

"Sun Lao, are these four axes OK?" Jiang Jianxing went to old man MAILUN to discuss the acquisition. Yunfei ran to the assembly workshop of the processing center again.

Sun Lin and situ Heyun, who have always been worried, have been guarding the assembly workshop these days.

"Cloud boy, can't you have some confidence in us?" Situ Heyun, whose back was already bent, gently knocked Yunfei's head and said discontentedly to Yunfei.

"Er, this batch of products is too important. You don't have confidence. Where did you get confidence, boy? The wolf is coming soon... "The development time is too short, which is the eternal pain in Yunfei's heart.

"How's your acquisition in the Northeast?" Sun Lin is also old. In recent years, he has been in the 91 Research Institute, which is much more tired than they are in the National Machinery Research Institute. If Yun Fei hadn't arranged people to send the two old men home every day, it is estimated that they would have to work as hard as those young people.

"For the time being, we haven't specifically considered which companies to buy. The number given by the Ministry of machinery industry is too large this time. Our financial resources are not enough to deal with such a large-scale acquisition. It's impossible to buy completely. We can only choose some promising acquisitions..." the old man is really old, but he has more worries.

In the past, Sun Lin never cared about any development plan of 91 heavy industry and spent his time on research every day.

"Cloud boy, I discussed with Lao sun. After these four axes are delivered, we will concentrate on taking graduate students instead of doing research. What do you think?" Situ Heyun's words made Yunfei's heart tremble.

"OK, sir, are you going back to the capital or just stay in Chengdu? The environment here in Chengdu is much better than that in the capital. There is no wind and sand, so it is suitable for the elderly... "Yun Fei paused, turned his eyes and replied to the two old men.

"What's your idea, don't we know? Boy, don't worry, many old guys are going to stay in Chengdu for the elderly. As long as you can get the Ministry of education to agree that your graduate school has the qualification to recruit postgraduates, we will help you bring it... "Sun Lin said to Yun Fei heartily.

A group of young people such as Deng Lanqing have grown up in the past two years. These old guys should make room for Jiuyi heavy industry to train talents. Otherwise, once they have any accident, some projects of Jiuyi Research Institute will come to a standstill.

And their energy is getting worse and worse. It's OK to take students. They can't even preside over the research work and even devote themselves to it.

"Although we produced these four axes, they also met the accuracy requirements of the design, and the processing accuracy could not be compared with the ep6 imported from Germany..." Sun Lin sighed. Even though it took more than five years, he also made a lot of basic technologies from the Machinery Research Institute and the machinery technology of the Soviet Union, and finally produced products, But it can't compare with the ordinary four-axis machining center in Germany in the 1980s.

Ep6 in the four axis machining center, the accuracy level is not the highest, otherwise it is impossible to export to China.

"That's it first. As long as it can be produced, it can be continuously studied and improved in the future! We started too late and can't compare with those industrial powers. It's good to launch such products now! " Yun Fei sighed.

He also wants to produce a four-axis machining center with the highest accuracy level at once.

Even want to produce a five axis machining center immediately.

However, he knew that this was simply unrealistic.

"Xiao Yun, I'll discuss with Mellon and they also mean that. At present, we first buy 11 factories such as Hongqi machinery factory, northeast Forging Factory 1 and Harbin mining machinery factory. The capital required for the acquisition is about 480 million, of which the acquisition price of Hongqi Machinery Factory is expected to be 120 million..."

After three days of discussion, the senior management of Jiuyi group agreed to reduce the acquisition scale. After the acquisition, they upgraded the equipment of these plants immediately to quickly form the completed production capacity.

"More than 300 million can complete the technical upgrading of these plants?" Yun Fei said suspiciously.

"No, far from it. If it is completed, it will require more than one billion dollars!" Jiang Jianxing shook his head and said a number that made Yun Fei's head big.

Seeing Yunfei's sad face, Jiang Jianxing immediately said to Yunfei: "Mellon's team suggested that we can first upgrade the technology of Hongqi machinery plant and northeast forging plant 1. The main reasons for the collapse of these two plants are the serious aging of equipment and poor management level. Among them, the first northeast forging press introduced a lot of technology and equipment from Germany and the Soviet Union in the early 1990s. Now it can produce 600 tons of heavy hydraulic punch at the maximum... "