Chapter 645

"The purpose of this large-scale acquisition of China's bankrupt state-owned machinery factory by Jiuyi heavy industry should be only one - to expand their production capacity!" Peng Zhiyu said surprisingly.

Not only him, but also all competitors are analyzing the big moves of Jiuyi heavy industry some time ago.

Almost all the enterprises acquired by Jiuyi group are machinery related enterprises - foundries, forging machine tool plants, heat treatment plants, the largest number, indeed machining plants! Just the foundry, Jiuyi heavy industry acquired the abandoned Jinling foundry and the Northeast Shanyuan foundry.

Most of the large castings of Jiuyi heavy industry are provided by Hal heavy industry and capital No. 2 Machinery Co., Ltd. Now they have acquired the two foundries, and the production scale is not small.

Moreover, I Jiuyi heavy industry has not heard that it will cancel the foundry and roughing contract of large castings with Hal heavy industry and capital No. 2 machinery. This shows that the production scale of Jiuyi heavy industry will be at least doubled.

In this way, the production scale of their processing center will reach 16000 units a year! The two axis simple CNC lathe (mainly economical CNC lathe with low machining accuracy) will also exceed 30000!

This is the conclusion of Peng Zhi's analysis

He didn't believe that the young boss of Jiuyi heavy industry would be free to buy these factories. This is obviously an acquisition supported by the mainland government. Otherwise, Jiuyi group would not be able to get so much acquisition funds at all.

At the beginning, several other federations were established, and his Wanyou refused to participate. After all, they could not occupy a dominant position. On the contrary, they would be regarded as cannon fodder by the Japanese.

"I have reported the current situation to the company headquarters. No matter what response the American and European companies make, I believe our domestic counterparts will make great moves. We must curb the development momentum of the group... "Saburo onomura said gnashing his teeth.

"Mr. Ono, I don't know what you will do? Are you inviting us today just to announce and show your determination? " Li Mingshan is not polite to onos.

Slow silk technology, South Korea also does not have mature technology. Samsung Group's start in this area is similar to that of 91 heavy industry, but 91 heavy industry has come in front of Samsung.

"I don't know how the domestic industry associations will react, but at present, we have to respond! For Mitsubishi, it doesn't have much impact. In terms of four axis machining centers, we only have a small amount of exports, and now we are trying our best to develop China's five axis machining center market... "Saburo onomura looked indifferent to everyone.

"Mr. Ono, please don't go. You are the processing center exported by Mitsubishi to China, and the three-axis processing center is your most important business! " Song Hui frowned.

What on earth do the Japanese want to do?

Do you instigate yourself and others to reduce prices? Not long ago, in order to cope with the price reduction of 91 heavy industry, they have been forced to make a large price reduction. If they reduce it again, how much will they have to reduce?

"The machining accuracy of our three-axis machining centers exported to China is much higher than that of 91 heavy industry. Why should they compete with us?" Saburo onomura's price fluctuation range for China business is not large.

If it is possible, he will certainly reduce the price by a large margin, and even let them reduce the price of the same type of products of Mitsubishi and Jiuyi heavy industry to the same level.

Only by curbing the development trend of Jiuyi heavy industry in the market can they stop their investment in technology development.

"I will apply to the company to sell the production technology of the four-axis machining center to you. At the same time, I will also propose to the board of directors of the company and to wassena association to let them release the restrictions of the low-precision five axis machining center on the Chinese market..." is this a way.

Saburo onomura has reason to believe that in recent days, those giants in the world will certainly have countermeasures.

It is impossible for them to let the 91 heavy industry develop indefinitely.

At present, the only way to limit the technological development of 91 heavy industry is to make an issue from the most rooted economy. At present, the boss of 91 heavy industry is investing everywhere, with bank loans of more than 2 billion, of which a large part is mortgaged by 91 heavy industry.

Once the market of Jiuyi heavy industry is eroded and the technical investment can not keep up, the market will shrink further. If other investments of Jiuyi heavy industry can not be recovered in a short time, Jiuyi heavy industry with broken capital chain has no way to go except to be acquired by China's large state-owned companies!

"Mr. Ono, I wonder if it is possible for us to obtain the production technology of the five axis machining center?" Song Hui asked the voice of everyone present.

With five axis production technology and four axis technology, there will be the same.

The market of four axis machining center is far less extensive than that of five axis machining center. Everyone present understood.

It is impossible to obtain the production technology of heavy five axis machining centers that can process large warship propellers, but no one is willing to give up the production technology of small woodworking machines.

With these technologies, we can not only produce five axis machining centers. As long as we have a thorough understanding of many technologies above, it will greatly improve the company's machining technology level, mechanical design and many other general mechanical technologies.

"It's unlikely, but you can learn from President Peng. Aren't they negotiating with Italy at present? The whole of Europe, not only Italy, but also Spain, Portugal, the Netherlands and many other countries, those companies with the production capacity of five axis machining centers are now very depressed... "Saburo onomura said to the people.

What he meant was to tell the public that it was impossible for Mitsubishi to sell the production technology of the five axis machining center.

Similarly, his words also leave a great hope for everyone. If you want to obtain this technology, many poorly managed factories in Europe are good choices.

"Forget it. We Zhongsen still only do three-axis machining centers and two axis CNC lathes!" If there is no huge technical strength, even if the production technology is obtained, the production capacity can not be formed in a short time.

Moreover, the technology of those enterprises that can be acquired cannot be very good. These companies without that technology are difficult to digest after obtaining the technology, let alone improve the accuracy level of technology.

This requires a lot of money as a backing.

The meeting lasted until early in the morning. At last, few people knew what kind of agreement had been reached except the parties.

Jiang Jianxing and others, although they went to bed late the night before, they still got up early the next day.

Today, it will be the day when they begin to harvest.

Over the years, a lot of human and material resources have been invested in these equipment for today's harvest.

Moreover, it is gratifying that the heavy numerical control equipment developed by 91 heavy industry does not even have a market competitor.

"President Jiang, if those foreign guys want to buy our heavy equipment today, let's..." Wu Zhongda is most worried about this.

Whether the country will prohibit the export of some sensitive equipment has not been clearly documented and stipulated. These equipment are not key military equipment.

At most, it can only be regarded as the key equipment for processing key military equipment! These equipment, military and civilian, are not easy to define.

"Don't worry about this. I called Yun Fei last night and he will deal with these problems himself. I don't think it is very possible for the state to restrict our exports in this regard! " Jiang Jianxing's words reassured Wu Zhongda a lot.

Wu Zhongda's biggest concern now is that the state restricts their exports in this regard.

Yunfei continues to expand the production scale of the whole Jiuyi heavy industry, which puts great pressure on sales.

Of course, the benefits can be seen after these capacity expansion. If it is produced at full capacity, the output value of numerical control equipment of Jiuyi group will exceed 10 billion!

Last year, the output value of the whole 91 heavy industry was only 2.8 billion. This year, it is estimated that it will exceed 3.5 billion! The equipment of Jiuyi heavy industry has a market share of more than 30% of the same type in the whole Chinese market. The market share of Heavy CNC equipment is almost 100%.

Of course, this 100% market share is not much.

Before expanding the production scale, the biggest problem of Jiuyi heavy industry was the lack of production capacity. After expanding the production scale this time, it faced the problem of sales channels.

The competition in the Chinese market is becoming more and more fierce.

In order to achieve greater development, in addition to constantly exploring the Chinese market, Jiuyi heavy industry has to go out.

The international situation in North Korea, Iraq, Iran and Pakistan is not optimistic. In order to protect themselves, they can only continue to develop military industry.

For them, after having manufacturing technology, it is far less cost-effective to buy some more advanced weapons than to produce them themselves.

Moreover, a few years ago, they also obtained a lot of conventional military technology in China.

In particular, in Iraq, Yun Fei told them that the officials who came to visit 1991 heavy industry said that the United States would start against Iraq in the next few years. First, it would directly use air bombing as in the Gulf War, and then advance the ground forces.

Since the Iran Iraq war, the situation of Iraq and Iran has not been very good. Both countries have been subject to economic sanctions by the United Nations headed by the United States. Now the former Soviet Union has collapsed. It is very difficult to develop armaments.

It happens that the international community is ready to implement the oil for food program for Iraq, which makes it possible for Iraq to purchase Chinese CNC equipment - people are ready to build an oil equipment production plant!

If the Chinese government prohibits the export of these heavy equipment, the international market development of Jiuyi heavy industry will be greatly hindered.