Chapter 467

Hathaway put down the silver knife, then moved her body, and the towering place in front of her chest outlined an amazing arc. Most of the equipment of the clay magic image production line has been completed, and only the equipment engraved with runes has not been completed.

This equipment needs to be operated by using a taling structure made of legendary soul spar, but if it is only used to produce clay magic statues, it will be a waste, so sulun plans to input the magic pattern engraving technology of rock magic statues into it.

At that time, as long as other equipment keeps up, this equipment can be used to produce rock magic statues.

In addition to the legendary Tallinn, this machine also needs to use a lot of rare materials. After a lot of effort, SULEN and Hathaway finally made this equipment.

Finally, as long as the tower spirit structure was installed, Hathaway picked up the staff, and a burst of obscure spells were quickly read out. The surrounding element energy began to fluctuate strongly, and soon a dazzling aura appeared, and a powerful element fluctuation came here.

"Legend activates construct life!"

Strange elemental energy quickly gushed out of Hathaway. The powerful magic instantly shrouded the legendary Soul Crystal in front of her, and soon another wave of energy appeared in the room.

"Soul weaving! (super magic skill + magic shaping + soul construction)"

The power of the soul changes rapidly under the operation of Hathaway. The magic of soul weaving is very difficult. This is the key to making the legendary tower spirit. It is equivalent to shaping the personality of the tower spirit, building the framework and making the tower spirit according to his ideas.

Usually, the taling made by wizards is extremely calm and rational, but it doesn't hinder some people's personal hobby to make a funny taling. Hathaway, who already had production experience, moved quickly this time. It took about ten minutes, although a rune was completed.

With a flash of light, the legendary tower spirit was completely completed.

The next step is to install the legendary talisman structure together with the rune engraving equipment. This is not very difficult. After placing the legendary talisman in the heart of the equipment, the automatic magic pattern engraver is completed.

[automatic magic pattern engraver: a legendary device that can engrave the required magic patterns on objects as required, with accuracy + 25, efficiency + 35, indestructibility + 30, logic operation + 32 and fault reduction + 33.]

Seeing the properties of the magic pattern engraver, Su Lun nodded with satisfaction. With this, his clay magic statue production line was completed.

Without a break, Hathaway and Suellen returned to the secret place with an automatic magic pattern engraver. At this time, the clay magic statue production line in the secret place had been roughly completed. After Hathaway installed the device, the direct connection energy was turned on.

Although I have a lot of information about my work, I still debug it. The light blue element energy enters the magic image factory through the energy channel, and the whole magic image factory starts slowly. Several clay statues as workers woke up from standby and prepared for work.

"Taling, builder one starts!"

"System self test in progress!..."

"System self test completed!"

"Start loading program!"

"Loading progress: 20%, 40%, 60%, 80%, 100%!"

"Load complete!"

"I'm in control of the clay magic image III automatic production line!"

"Connection completed!"

After standing quietly for a few days waiting for the notice, the clay magic image began to act instantly! Taling: Builder 1 is the name of the legendary taling on the automatic magic pattern engraver, and this legendary taling is also the brain of the whole clay magic image production line. This set of automatic production line began to operate normally under its operation.

"Start the clay magic image production line!"

With Su Lun's order, the clay magic image production line started instantly!

Several clay magic statues began to operate the machine. Carts of clay were sent to the crusher for crushing. These clays were not completed until they became very fine like flour. Then the crushed clay would be sent to the mixer for mixing. While stirring, magic essential oil, elemental dust and other materials will be added. Finally, the evenly stirred clay will be sent to the die press to make a standard clay magic image structure.

After a series of processes, these parts are sent to the magic pattern engraving workshop for automatic magic pattern engraving, Yiming and magic pattern engraving. Hathaway and Suellen looked seriously at the part of the clay statue that had been processed in the eye circle, and a bright ray lit up.

It was the beholder's vice eye that Hathaway had handled before that sent out this ray. I saw that the light was still a little thick when it first appeared, but it immediately began to shrink. On the nearby measuring table, the data of the instrument beam was accurately measured.

If the data does not meet the requirements, the production will be rejected. The beam corrector next to it is used to correct this place. Next to the beholder's deputy eye, there is also an energy controller, which controls the power of the light beam.

Under the control of Tallinn builder 1, the beam soon met the requirements of the product. Then start to engrave the magic pattern, and the long prepared arcane dust and gem powder begin to be put in. As the beam of light swims rapidly on the part, an accurate magic pattern appears on the part.

After some debugging, the speed of the magic pattern engraver became faster and faster. In just three minutes, one part completed the magic pattern engraving. Hathaway took up the produced parts and checked them. The parts of this clay magic statue are almost the same as those she designed. Although they are not as good as those she made herself, they are already good.

This automatic magic pattern engraving instrument can engrave magic patterns on six parts at a time. Of course, it can also engrave one piece with six beam rays.

With the operation of the magic image production line, a clay magic image was produced soon. After turning around the clay statue, Su Lun found that it was no different from the normal statue.

Seeing the successful production of a magic statue, Hathaway and Suellen were relieved. The magic statue production line was finally completed.

"Builder one!"

"I'm here, master!" Tallinn's cold mechanical sound began.

"Stop production! Let those clay statues come and stand!" Hathaway said, pointing to the working clay statues.

"Yes!"

Soon, several clay statues were neatly arranged in front of Hathaway.

Hathaway took out a silver carving knife. These clay magic statues are different from those just produced. They are loaded with the operation process of some magic statues production line. However, during the operation just now, these transformed clay magic statues have some small problems. Now Hathaway needs to modify them.

The main work of transformation is on the palm of the hand.

Hathaway repaired their dexterous hands with a carving knife. At the same time, new runes were engraved on the finger joints and wrist joints, which can strengthen the flexibility of the clay magic image's hands. The magic image for combat does not need this kind of precision transformation, only this auxiliary type will need it. The consumption of this transformation alone is enough to recreate an additional clay magic image.

Although auxiliary magic puppets have poor combat effectiveness, their cost is usually much higher than that of combat magic puppets!

Auxiliary demons need to instill more professional knowledge into them. Only with this knowledge can they carry out various work according to the site conditions. Their palms are very flexible. Only in this way can they carry out all kinds of work.

After completing the operation of the clay magic image production line, the next step is to officially install the production line, and the plant also needs to be built. Su Lun specially opened up a space of about 1800 square meters, and then built a clay magic image production line workshop according to the style of the factory plant in the previous life.

The making of clay magic statue can be divided into three parts. The first is to build the limb part. This step can be disassembled. This part is made directly through the die press. It is not very difficult. Even a wizard apprentice can do it. The second step is to carry out various treatments to shape these clay parts and make them not easy to be damaged at the same time. Only after this magic treatment can the clay magic image continue to be produced.

Otherwise, the clay magic image can only be clay, and a piece can be knocked down by a stick. It is impossible to fight or work at all. Only after these magic treatments will these clay become as hard as rock.

The third step is the most critical magic pattern engraving. Only after completing the magic pattern engraving can the magic image be able to perform various actions as if it had life. Of course, the premise is to have energy.

The fourth step is to assemble the body structure. This step is like splicing toy models to assemble the complete structure of the magic image puppet. There are the most clay magic statues in the assembly workshop. In fact, it is also a maintenance workshop. The damaged clay magic statues will be replaced here.

The benefits of part standardization proposed by Su Lun are fully reflected here. If any part is damaged, it can be directly removed and replaced with a new one. As long as the damage is not too serious or the soul core is destroyed, basically the maintenance problems of these demons can be solved.

The last part is spell casting activation, which is not automated for the time being. In fact, this step can be activated through the tower spirit. Input the activation spell inside the tower spirit, and the activation of the magic image can be completed with the help of the magic of the element pool.

Just because the value of clay magic statues is not high, Hathaway and Suellen don't want to add a tower spirit. You know, the cost of such a tower spirit is about one million jinnar. Moreover, Suellen also wants to build other production lines of magic statues, which needs to spend a lot of legendary Soul Crystal stones to make the tower spirit. Naturally, they are unwilling to invest too much in this production line.

In fact, to activate the clay magic image, you only need to let those high-level wizards come and cast spells once every once in a while.