211 6.5 Three Hours, Five People And 60k Refined Steel Plates Done

We sat down on the ground of the Ops Room and began our meditative state and when we opened up our eyes, we had gathered on the Shrine where the Shilton no Tama was placed.

Since it was the last place we had been, I swiped the scene to the left and ended up at the Blacksmith area. I swiped again and came to the Essense extraction room and I disintegrated the heavy print set machine out from there.

Find authorized novels in Webnovel，faster updates, better experience，Please click www.novelhall.comfor visiting.

I then swiped the scene to the right and came to the Blacksmith area and I visualise the heavy print set to appear on an empty spot. There were sacks of iron ores, coal and limestone in standby. Since there was a single dispenser machine, I visualised another 4 similar ones with the conveyor belt and the forced cooling cryogenic system in the middle of the 3-meter track.

After all the 4 dispensers were visualised, the settings were fixed to release the Molten steel onto the target area for the fixed number of seconds to properly fill the moulds on the trays. It took about 15 minutes to get everything running and the temperature was quite alright because the furnace was not running yet.

I visualised a bigger smelting pot that could supply at least 5 dispensers at three-quarters full each time and since we have 5 dispensers, the proportion for the iron ores became 16 buckets, 8 buckets each for the coal and limestone. I started the automated pump of the furnace and the intense rising heat at first made Sango and Kikyo moved to the end of the conveyor belt away from the furnace.

It was painstakingly slow to remove all the slag and impurities but after the temperature hit the boiling point of steel, it was much easier to remove the slag. They looked a where I had dropped the slag and asked me where it ended and I said it may have given to a factory called Iron Mountain somewhere in Jurong.

I pouted the contents of molten steel into my main dispenser and showed them an example. I took a tray behind me, locked it in place in the target area and stepped on the pedal once to release the Molten lava onto the tray. It sizzled because of the heat and the molten lava ran into the 'runway' and ended in the plate reservoir.

I unlock the moulding tray and it moved into the forced cooling cryogenic chamber and slowed down. I made everyone test on my machine first and once they have gotten used to the procedure, they went to their individual dispensers system.

After ensuring the release system for the dispensers is accurate, everyone was armed with a kitchen muff to carry the plates over on the pallet. I advised them to be careful as I slowly manoeuvred the boom to pour the contents from the smelting pot into the dispenser systems.

After all, had been filled and emptied, I replace the smelting pot with another batch of iron ores, coal and limestone. And soon the process begin...! Everyone took their tasks seriously and only I can't keep up the pace since I have to smelt and clear the slags and after I had set the molten lava to be on heating point, I started my process on the dispenser system.

Inuyasha was mimicking the sounds the machines were made with his mouth and I'm sure that tonight in his dreams he would be mouthing the same sound effects too. Hahahaha.

Soon 125 moulding trays were loaded on each pallet and were pushed away to make space for more pallet trolleys.

1 pallet...

5 pallets...

15 pallets...

30 pallets...

48 pallets.....

"Phew...!!! That's it, guys. We have reached our target for the day. Its been 3 hours here and we had reached 6,000 moulding trays already. Leave the rest in the dispenser units, once we leave this Realm of Mind, this place would be frozen in time."

I announced to the guys who had helped us to produce the 60,000 Refined Steel Plates and had filled 48 pallets of 125 moulding trays each. Since the moulds had gone through a cooling cryogenic system on the conveyor belt, the moment it had exited at the end of it, the temperature had cooled down to only 15% of its state.

Thus when we entered again to knock these plates out in the caged wagon, it would have long been cooled off.

We logged off from our meditative state and entered the real world. We sat around on the floor in the Ops Room of the empty warehouse and everyone seemed to be soaking from our own perspiration.

"Please excuse us, we would like to take a shower first before heading for dinner. It is only an hour spent here in the real world right? But it really seems to be an eternity there."

Sango and Kikyo felt very icky since they discovered that they had sweated buckets and soon excused themselves to clean themselves up.

Inuyasha, Hiko-sama and I headed to the garden first and waited for our perspiration to dry off first from our sweaty bodies. Hiko-sama had a jar of yumeshu beside him and poured it into 3 cups.

"Kanpai...!" as we took our cups and cheered.

"How was it, Inuyasha? You don't feel that too affected by the heat in the process of the plates."

"Keh...! This Fire Rat Robe prevents me from getting burnt or harmed by the heat or fire. It is alright, I do need the workout. The only workout I would get is when I held Kikyo and piggyback her."

"Other than that, the workout I got from your Blacksmithing area in the Realm of Mind is really worth every single minute. It seems rather fun and simple, watching every single Molten steel drop into the trays and into the rivulets and into the plate mould."

"Too bad, as what you mentioned, it can't be brought back here. So you made this Kodachi the same way?"

"Something like that, but I used the anvil and hammer to knock at least 1,500 times to shape it, then plunge it into the furnace and hit again repeatedly."

Inuyasha held the Kodachi in his hands and was amazed that it needs more than just hammering to shape this into a fine masterpiece that had not failed him during the expeditions.

"I'd be going off too. I prefer to go to the stream and soak for a while."

With that, Inuyasha turned and bade farewell as he headed towards the outermost District and a small winding stream a short distance away.

"Sensei, so how was it having at least some people to help us produce these plates? It's more efficient, right? But the toll of taking more people in really affects my internal energies."

"Don't be too hard on yourself, kid. Take it easy. Furthermore, they have their own duties to perform too."

I nodded in acknowledgement and Hiko-sama poured me another cup of yumeshu. After a few cups, I took my leave and went to shower and lay down for a while to gain back my depleted energies.

Bringing in 4 people and a Youkai into the Realm of Mind really is a heavy task that I can't perform daily at all. Before I lie down after my shower, I sat down and meditated a bit as I channelled my energies from my 4th chakra point all the way to my secondary points as well. After I had gained back my energies, I regain my sense back and lay down and dozed off minutes later.