Grassland City, 4447 factory.

In the workshop, the roar of various machines continued. In the roar of the hydraulic press, steel plates were pressed into pieces of cab components, and then sent to the front welding line for welding. Soon, a full cab appeared.

The trucks produced by 4447 factory are not completely in accordance with the prototype drawings. For example, the cab is additionally increased by 20 cm. When leaving the factory, it leaves a good space for the sleeper in the back.

Competition, with what competition? From now on!

The prototype Steyr has a sleeper width of less than 50 cm. It is difficult for people to turn over when lying on it. Now, it has increased to 70 cm, which is quite loose.

Heavy trucks run long distances. If they are equipped with two drivers, one for driving and one for rest, it is the most ideal. The sleeper in the back is wider, which can give the driver a good rest environment.

However, there is no process such as electrophoresis. If the cab is welded, it can be painted directly outside. Anyway, the iron sheet in this era is thick. Even if it rusts, it will take many years to embroider it. It is definitely not like that paper car.

"This is the cab we produced ourselves, with the final assembly in front." in the factory, Qin Guan, dressed in ordinary overalls, inspected with he ribala.

Cab is a necessary procedure for manufacturing the whole vehicle. On the front general assembly line, it starts from the girder of the vehicle body, and all equipment is installed on the girder.

Because it is a test run, the progress is not fast. In particular, the engine needed in front is not in place.

On the girder, install three large parts, engine, gearbox and axle. In this way, the chassis comes out, arrange various pipelines and accessories, and put the cab on the frame, and the whole vehicle comes out. It's simple to say.

Still short of engine!

"You go back first and I'll go to the engine production line." Qin Guan said.

In the past, 4447 factory did not produce engines and was sent from downstream manufacturers. 4447 factory only focused on assembly. Now, the newly opened engine production line seems a little chaotic.

The tools were scattered everywhere, and the workers were also at sixes and sevens. Some were working and some were idle. Qin Guan glanced at it. A figure was running quickly, and Qin Guan looked stiff.

"Director Zhang, what's going on?"

During Qin Guan's absence, the workshop director, Zhang Xiangyang, studied and decided to transform Zhang Xiangyang's production workshop into an engine production workshop, and Zhang Xiangyang became the person in charge of the engine workshop.

What are the most important parts of a car? The engine, of course!

Just a few months ago, Qin Guan was just an ordinary worker. Zhang Xiangyang was a high-ranking factory leader. At that time, Zhang Xiangyang was so arrogant that he yelled at Qin Guan and would dismiss Qin Guan at every turn.

But now, Qin Guan has become a deputy factory director, and even the factory director has to be kind to Qin Guan, while Zhang Xiangyang is still standing still. If he doesn't operate quickly when Qin Guan is not there, I'm afraid he can't be the workshop director of the engine.

Even so, he has to be under the jurisdiction of he ribala, because he ribala coordinates the whole heavy truck production, and his heart is quite indignant.

But he can't show it.

Now, he has to bow and bow: "factory director Qin, are you back? Hey, I'm really sorry. Our workshop is waiting for qualified equipment to be transported to manufacture the high-pressure oil pump we urgently need, and then we can continue to assemble and test run. Now the equipment is not affected, so we can only wait."

Other parts have been built. Without the high-pressure oil pump, the follow-up cannot be carried out.

"Well, I know." Qin Guan said, "we need high-precision lathes and boring machines. The accuracy of our existing machine tools can not meet the requirements. The factory will solve it immediately and move the backward machine tools to the R & D workshop."

The lathe is used for the plunger in the car, the boring machine, and the oil cylinder outside. The combination of the plunger and the oil cylinder is the high-pressure oil pump.

At the same time, these high-precision equipment can not only solve the problem of high-pressure oil pump, but also solve other problems in engine manufacturing. After all, many engine parts also need high precision, such as cylinder block and connecting rod.

Suddenly, Qin Guan was stunned.

In this workshop, in a secret corner, there are irrelevant redundant people!

Wang Lijun, the guy who had been fired, actually appeared in the factory again. Hum, do you want to say that Zhang Xiangyang has nothing to do with him? Who believes it?

Even if it doesn't matter, it has to be related. In short, I just took this opportunity to get Zhang Xiangyang down!

It's all rhetoric not to forge ahead and not to reform. Just a little is enough. He doesn't like his eyes. That's enough. Besides, he also makes himself a stumbling block. Wang Lijun must have come with a bad heart. He must not stay!

How did Qin Guan find Wang Lijun? It's too simple. When the spirit point scanning system is enabled, the name will be suspended on it. Moreover, there is an irrelevant person next to Wang Lijun.

Is it such a coincidence?

Yes, that's what happened.

Seven days ago.

These people fight really hard! Hua Dongjie lay by the river next to the town and thought of it with hatred.

I didn't make any big mistakes. I'm usually a little gangster. The most I can do is eat some free food and make a prank. This little thing is nothing at all.

But today, the beating hurt his heart. It seemed that all his bones were broken, leaving only one breath.

However, the feeling of pain is really echoing in my mind all the time, but the physical injury is not serious at all. If I go to the hospital for identification, it is a minor injury. He has no chance to retaliate. Even if I go to report the case, who cares? My friend must be afraid to manage. Those people seem to be very powerful!

Beating people is very particular. (I think of one thing. It is said that a sister studying medicine cut her cheating boyfriend 18 times. Her boyfriend wailed for a long time and thought he was dying, but he perfectly avoided all blood vessels, vital points and nerves. Finally, the doctor identified it as a minor injury. The sister closed the detention Center for a few days and came out.)

There was no hope of revenge, so Hua Dongjie could only tie up a scarecrow with straw on one side, and then picked up the peach wood sword he had played for more than ten years, which was shiny.

He pointed to the villain with a peach wood sword and began to speak loudly: "Yuqing has a life and sue for three yuan; Cao Zhi in ten directions, as announced by his life; all his subordinates stand in front of the altar; turn to greatness and help people and heaven; as urgent as a law!"

"Taoist priest, there's a Taoist priest here!" just then, suddenly, he heard an excited voice: "Kung Fu pays off, and finally let us find it!"