The reason why nb-36p is called a low-end space manipulator is that nb-36p is not mature as a space manipulator, mainly because its flexibility, remote control and its own weight do not meet the practical standards of American space manipulator.
No way, China's take-off has never done anything similar in the past. It's hard to get started at once without experience. Therefore, it's natural to be an experimental model to practice.
Nb-36p industrial robot is such a work of practice.
However, it would be a big mistake to underestimate the nb-36p industrial robot. Although it is used in the space manipulator, the nb-36p industrial robot is not fully competent. In the field of industrial robots, the nb-36p industrial robot can be called the existence on the tip of the pyramid and can crush a lot of products of the same type.
Therefore, as soon as nb-36p industrial robot came out, it was taken off and applied in the key position in the field of aviation and aerospace manufacturing in China, and achieved extremely remarkable results.
However, industrial production is like a table full of men and Han. There should be exquisite dishes and some daily dishes to relieve the greasy mouth. Nb-36p industrial robots are naturally indispensable, but general industrial robots that can carry out repeated work are also indispensable, and even the backbone of production.
But the problem is that China's high-end products can be extremely high-end, but there are obvious deficiencies in the middle and low-end. It's not that they can't be done technically, but that the cost is not cost-effective at all.
This can be seen from the attitude of several domestic automobile manufacturers towards nb-36p industrial robots. Good things are really good, but such high-end products are rarely used in vehicle production lines. Most of the production can be solved by ordinary middle-end goods. Therefore, in addition to praising the excellent performance of nb-36p industrial robots, there is no real money to buy.
Of course, I won't buy it even if it's cheap. How cheap labor is. Compared with complex machinery, cheap labor is obviously more cost-effective.
However, this situation cannot last too long, because relevant domestic units have noticed this abnormal imagination of human cost. Of course, more importantly, the domestic low-end industrial foundation has been very solid, and there has been a certain accumulation, so it is time to arch into the middle and high-end.
The problem is that moving forward to the middle and high-end can not be accomplished by shouting two slogans. After all, many enterprises live very well in the low-end comfort nest. No one will be happy to let them leave the comfort nest suddenly. They can only use other macro means to force the overall upgrading of the industry.
One of the most practical policies is to raise the minimum wage and effectively raise labor costs.
At that time, the life of some enterprises will be difficult. For example, those car enterprises that rely on low labor costs may be in trouble. If they want to get rid of this dilemma, they can either improve production efficiency and reduce their own costs at an efficient production rate; Or just close the door and go straight to the street!
In order to improve production efficiency, a large number of industrial robots for different purposes such as heavy-duty handling, welding, spraying and assembly have become the first choice for these car enterprises.
Because of this, domestic relevant industry prediction institutions have long made research reports. In the next five years, there will be a gap of 100000 industrial robots in the industry of light vehicle manufacturing, which is a huge market of more than 300 billion yuan.
This is just a vehicle manufacturing industry. If the demand of metallurgy, chemical industry, steel, machinery, electromechanical and other industries is included, the gap in the future is conservatively estimated to be more than 500000 units, which is a huge market of trillion scale.
If China's take-off does not make industrial robots, it's just that it has no relationship with him no matter how big the market is. The problem is that he has not made nb-36p industrial robots, which has to make China's take-off some jealous. If we don't tear down a trillion level market, God probably won't forgive them.
However, the idea is good, but the key is that China takes off, high-end players take off, and the middle and low ends pull their crotch. The problem is that the industrial robots needed by most domestic industries are middle and low-end products, especially the industrial robots above the middle end, which are not only the backbone of the demand end, but also the largest profit among industrial robots.
Because of this, China Tengfei very much hopes to cultivate its own industrial robot brand like medical equipment in those years, which can not only make supporting facilities for itself, but also make a good profit based on the domestic market and facing the world.
Unfortunately, China's take-off has this heart, but domestic qualified enterprises can't find one, which makes China's take-off can't find a way even if it wants to support it.
No way. Although the future of domestic industrial robots is wonderful, the reality is very skinny. The overall industry can only be described as in its infancy. Many upstream and downstream supporting facilities are not available at all. Naturally, there is no good enterprise.
Since there is no such thing at home, China's take-off will look abroad and directly buy foreign factories and technologies.
As a result, it was found that most of the relevant foreign brands lived well and despised the acquisition of China's take-off. China's take-off, which hit the wall, could only readjust its strategy and began to think about acquiring a number of supporting enterprises with strong strength from the industrial chain upstream of industrial robots, Then make use of China's strong supply chain integration ability and its strong software control and basic algorithm advantages to build a brand.
This idea was just mentioned by Zhuang Jianye at the leadership meeting a few days ago. There was no clear internal consensus on China's take-off. Mararne came to Natou with wheezing.
How could Liu Lei let him go.
After an empty handed cooking show, Liu Lei led maraernet and Cheng Feng, who were still in a state of ignorance, to sit down on the temporarily set table. First, he talked and laughed with Cheng Feng and said some interesting things that happened in Xingzhou. After Cheng Feng felt that he had not been ignored, Liu Lei scooped Wensi tofu into the bowl in maraernet, He smiled and said, "Mr. maraerne, this is a classic dish cooked by nb-36p industrial robot. Do you have the flavor of chef Huaiyang?"
Malarney, who was worried about this, was stunned. He immediately reacted and replied, "it should be very good. Of course, I haven't eaten much Chinese think tofu, and it's not very good to evaluate."
"It doesn't matter if it's not much. Stay in China in the future. You can eat as much as you want in the eight major cuisines. You're afraid you won't have a chance?" Hearing the speech, Liu Lei laughed and said something as if he didn't care.
Maraernet didn't understand the meaning for a moment and waved his hand again and again: "there are still a lot of things to deal with in Italy. I want to stay here, but..."
"Hey ~ ~ ~ I said to my old classmate, don't you understand what President Liu meant? As long as you nod your head, your f & K transmission system company can be incorporated into China and take off immediately!" At this time, Cheng Feng reminded him.
Malay immediately woke up and immediately opened his eyes to Liu Lei: "and...?"
Liu Lei wiped the oil stains on his mouth and said with a smile, "why, can't you?"