Chapter 43

As soon as he said he would do it, he immediately rummaged through the filing cabinets. Let alone, he found out a lot of technical information about the mapping of high-power turbofan engines in those years.

Although these data are not complete, they are still of great significance for reference. For example, a turbine mapping drawing found from a pile of tooling drawings describes the turbine condition of the modified turbofan engine in great detail; and the analysis data found in some material materials express the alloy composition of the engine very clearly.

There are a lot of similar materials. Zhuang Jianye has been searching for them for two days, and has collected a lot of them. But after sorting them out, he finds that these materials are not systematic at all. They are all the same as plasters, one from east to west.

There's no way. The systematic information has been sent to H city ten years ago. What can be left is either the waste draft at that time or the initial data of the test. It's obviously impossible to use these things to build the engine, but it can piece together the initial context of Yonghong factory's mapping of the turbofan engine.

Zhuang Jianye is not so ambitious as to build an engine. That's what the factory director and secretary should consider. He just wants to restore the course of Yonghong factory's struggle.

It's just like sorting out the archives of the J-6 fighter. There are so many materials. Even if it's just the initial test data that are not systematic, it can't be finished overnight.

Therefore, Zhuang Jianye's passion burned for two days and then he lost it. He began to focus on his own business instead of his own.

In any case, there is still a long way to go to sort out the files. There is plenty of time to sort out. The key now is to sort out the main data properly so as to cope with the inspection.

When it comes to inspection, Zhuang Jianye has a headache. The Ministry's new regulations are extremely strict, requiring each file to be described in detail and to indicate the source.

If we put it in 20 years' time, there will be no problem. Even if it's not the electronic documents of the computer, there are rules to follow for the paper materials. However, Yonghong factory has made a lot of trouble in the special period, and many technical materials are incomplete. It's obviously impossible to meet the requirements of the Ministry.

To this end, Zhuang Jianye went to director Yan to report the situation. Director Yan took the notice issued by the ministries and commissions, looked at it, and then said a very chicken thief's words: "look at what is missing, just draw a ladle according to the gourd, and fill it up by yourself. Can the comrades of the ministries and commissions go to see it page by page? It's OK to get by. "

Zhuang Jianye has long wanted to do this. Now listening to the leaders, he naturally nods his head like a pound of garlic, and then he goes back to work.

But the problem is that you have to have a gourd to draw a gourd. If you don't have a gourd, how can you draw a gourd?

Zhuang Jianye's headache is this kind of information. He doesn't even have a fake template. People want to destroy the information after reading it. At this moment, Zhuang Jianye's idea is coming out.

There is such a record in the application file of the new technology of the J-6 fighter. It is said that Yonghong factory has improved the wing forming technology and introduced shot peening forming technology to process the wing of the J-6 fighter. After theoretical proof, both the strength and the structure are several times stronger than the wing panel made by the traditional technology.

On this basis, the designer of the process conceived a shot peening machine, and thought that the shot peening machine was the key equipment for wing forming in the future. A series of theoretical data proved that this idea was quite correct. As for how the data came from, how the theory was done, and what the machine was like, there was not a word in the data.

This is just a separate information. Zhuang Jianye will not hesitate to take it out and throw it into the garbage can. The problem is that many of the tooling drawings behind are determined based on this idea. Without this information, what should the leaders do if they see the tooling drawings behind? It can't be said that they invented it out of thin air.

So this pit has to be filled in anyway. The problem is that there is no reference for the application of this innovative new technology. What should we do? Zhuang Jianye is helpless, crazy and pulling his hair.

I knew that earlier. Why did I concentrate on the copper aluminum tube technology in the test department? I wish I could spend some time on the wing shot peening technology.

Wait The wing Shot Peening in the three major research subjects of the test department is not just to fill this hole, is it!

The more Zhuang Jianye thought about it, the more reasonable he was. Then he began to scold. What the old technical backbones of Yonghong factory thought of eight years ago is still the research subject of the experimental department. With this snail like speed, are you not afraid of the old technical backbones coming back to the factory to fight?

"It's also the core technology of wing manufacturing!"

Zhuang Jianye looked at the technical information in his hand, and knocked the tooth flower seeds. He was not angry when he was picked peaches a few days ago, and was immediately defeated by the low efficiency in front of him.

I can't help it. I have to stick to my head and do it on my own. Who let me do this? Fortunately, it's not really a new machine or a new craft. It's just a written explanation. Zhuang Jianye thinks he can do it with a little effort.

So he bit his pen and recalled the shot peening machine he had seen in his last life. He started to draw sketches on the blank drawing paper. Then he compared the data on the data and revised it over and over again. I don't know how long it took. Zhuang Jianye finally sighed with relief and nodded with satisfaction: "en ~ ~ this should be almost there."Then he wrote a string of parameters on the drawing paper which he had drawn in a mess.

In the next few days, according to this set of parameters, Zhuang Jianye helped his predecessors to make the shot peening machine in plain words. Then he looked at the technical data he had made up and began to compile it into a book, write a catalogue, and prepare for filing.

Just when Zhuang Jianye was busy alone, the door of the archives was suddenly knocked. Zhuang Jianye turned around and saw that it was Shi Jun, who had not been seen for many days.

Today's Shi Jun, like Zhuang Jianye, is a man of the year in Yonghong factory. However, compared with Zhuang Jianye's negative side, Shi Jun's positive side is in a mess. In less than half a year, he published two papers, made technical transformation for the key equipment of the four branch factories, and solved the problem of falling off rivets of the vertical tail of the J-6 fighter.

In addition, Shi Jun also had his own ideas on operation and management, and took the initiative to write a letter to the factory Party committee to offer advice and suggestions, which was adopted by the factory Party committee, but also noticed by the factory director and secretary.

As a result, Shi Junping not only followed Zhuang Jianye's first batch of promotion, but also was formally transferred to the first general assembly workshop as the deputy director of the technology room the next day, becoming the youngest technical cadre at the section level since the establishment of Yonghong factory.

Not to mention that. I heard that the Ministry visited the factory a few days ago. After listening to Shi Jun's personnel report, it made it clear that he would be included in the list of the third echelon cadres of the Ministry.

That's the inspection list of the Ministry. By contrast, the third echelon of Yonghong factory is a dreg.

Therefore, when Zhuang Jianye compares with others, he becomes a dreg!