Chapter 167

He Ming and other veteran cadres are naturally clear about all kinds of twists and turns. However, his current mentality is similar to that of director Yu, and he neither supports nor opposes them.

It would be best if we could rely on their relationship to open military orders. If not, Zhuang Jianye would not be surprised. After all, their TY-1 is not on the table in the eyes of the mainstream aviation industry.

As for returning to the list of key military guarantors, Zhuang Jianye supported it with both hands, but that's all. The real factory management was ambiguous. No matter how energetic some old people were, what could they do?

At the end of the day, ministries and departments and the army don't have to depend on the attitude of the leadership of the factory. If director Yu doesn't have this determination to do it, it's useless for anyone to go there. The people above are not fools. Why should they be so hot faced and cold buttocks? Is Yonghong factory the son of so many factories in China?

So, Zhuang Jianye's attitude towards he Ming's veteran cadres is that if he supports them, he should support them and shout slogans. If he wants to sponsor them, he should give them generously, and then turn around and do what he should do. In a word, he can't be hungry for his feelings.

Because of this, after Zhuang Jianye provided a TY-1 as a sample, he was busy expanding the aircraft production workshop of No.23 branch.

This is the most difficult problem in the factory today.

awesome, the city of the two electric fan factory purges very smoothly, the twenty-three branch side hosting this is not a half block, the fan business is completely transferred to another three household appliances fan production plant.

As a result, the 23rd branch began to transform the original fan production workshop on a large scale, increasing equipment, hoarding raw materials and refining the production process.

Every one of them is a great event. If Zhuang Jianye still has the heart to think of him, he will become a God.

"We got six sets of equipment from the No.9 branch, and the No.2 Branch is in contact with us. Director Xue thinks the price is a little low, so he doesn't agree."

In the afternoon, the equipment from Yonghong factory began to be installed. Zhuang Jianye, who had been busy all morning and had a good rest, immediately got up from the sofa of the office and went to the workshop. Wang Heping, who was in charge of the dispatching, immediately welcomed him and reported the current situation.

Because of the expansion of the UAV production workshop, the 23rd branch now stops the production workshop of refrigeration parts. The purpose is to reprogram the machines installed with sequence controller and simple numerical control equipment in the workshop, so that these machines can adapt to the processing and production of various parts of TY-1 UAV.

Yes, the UAV production workshop of No.23 branch is the original refrigeration equipment production workshop. The reason for this is very simple, because the equipment in this workshop has been fully automated, and some of the equipment has realized simple numerical control. There are also special equipment for aviation manufacturing, such as friction welding machine and bladed wheel shot peening machine. From all aspects, they are UAVs An ideal place to live in.

The only trouble is that the programming and debugging of sequential controller and simple NC is a little complicated. It needs to be re programmed along the production process and adjustment. Unlike the real NC machine tool, it can flexibly change the program according to the changes of components at any time, without the need for extra time to program.

If it was put in other factories, it would take at least 10 days and a half months to stop, and then it would cost a lot of money to invite professional programming technicians to do it. However, the 23rd branch didn't have to be so troublesome. When Lin Guanghua developed TY-1 a few months ago, Peng Chuan began to formulate process production plans and programming plans according to Zhuang Jianye's requirements and according to the equipment in the refrigeration parts production workshop.

After several months of careful research and testing, Peng Chuan did not say that the scheme was extremely mature, but it was absolutely the most suitable for the status quo of the 23rd branch. More importantly, it was very cost-effective in terms of time. In just three days, the original refrigeration parts workshop could be completely transformed into an aviation manufacturing workshop capable of producing unmanned aircraft.

There is no need to replace the labor force. The original batch of workers who produce refrigeration components are slightly adapted to the new technological process and are fully competent for the production of UAVs.

As for the original refrigeration parts business, it was transferred to the original electric fan production workshop, and the equipment was purchased from other branches of Yonghong factory. Then the apprentices trained in the past two years cooperated with the teacher Fu hired by Yonghong factory at a high price to carry out adaptive production. At the same time, it continued to carry out the automation and numerical control transformation of the production line.

I believe that when the inventory of refrigeration equipment stored up by the 23rd branch is used up, the new refrigeration parts production workshop should be able to barely meet the market demand even if it can not reach the previous capacity.

Thinking about the plan in his heart, Zhuang Jianye nodded: "it's really hard to deal with factory director Xue. He's a veteran of Yonghong factory, and ordinary people really can't help it. Leave it to me. In the evening, I'll tell my old man that his old subordinates should be dealt with by my old man..."

"Lao Zhuang, Lao Zhuang ~ ~"

Zhuang Jianye is still talking about this, and Peng Chuan comes over with a pile of drawings.

And then very impolitely began to complain: "impeller shot peening machine so fast to use?"? I said Lao Zhuang, can't you understand our difficulties?

You want the precision. We control the precision to 26 channels. You want the power of the impeller to be bigger. We work hard to modify the shape of the impeller repeatedly, and finally meet the requirements. You say you want the numerical control. OK, we work hard, but you can't do it now. Are you going to use it for production? If something is not stable, you can take it. If something goes wrong, whose is it... ""Well I have to I have to How much more money do you need? " Zhuang Jianye quickly stops Peng Chuan's complaint and smears saliva on his face. He says it is straightforward and can't help it. As long as he complains, it's not good for him. Unless he stops with money, he can't do anything else.

"Give you another 100000. I'll give you the semi-finished products I've saved. The new ones will have to wait for a while." Peng Chuan pushed the glasses on the bridge of his nose and said a few politely.

Zhuang Jianye's face turned green immediately. He smashed a CNC impeller shot peening machine back and forth into more than 200000 yuan, even 100000 yuan. Now it's 1984, and more than 300000 yuan can buy equal weight gold.

As soon as Peng Chuan saw Zhuang Jianye's face, his gentle face immediately became like Huang Shiren's: "don't bargain. You can't lose a cent. I'll tell you that it's not necessarily possible for the 100000 yuan.

Do you think it's so easy to use computer technology to control impeller parts to accurately complete complex shape machining of aviation parts? A floppy disk costs hundreds of pieces. In order to find the best solution, we need to use seven or eight at a time.

This is still a UAV. If you change to another model, you have to redo it... "

"OK, OK. You are my uncle. I'll give you a hundred thousand. You'll go to the financial department tomorrow."

Seeing Peng Chuan start to complain again, Zhuang Jianye starts to have a headache again. If the CNC bladed wheel shot peening machine is easy to operate, it will not become the forbidden zone of big aviation groups like Boeing and McDonnell Douglas. If you want to go further on the road of building aircraft in the future, you have to go this step, so it is necessary to invest 100000 yuan.