Chapter 313

"I'm going to give you a surprise. I didn't expect you to see it before I said it." Seeing that Zhuang Jianye immediately announced the name of the device in front of him, Wei Guangping couldn't say what the expression was, but he was immediately relieved and nodded in admiration: "it's no wonder that Tengfei factory will look like it is today. As the director of the factory, you are not only a director, but also a knowledgeable person."

Then he said with a silly smile: "but in this way, we zero factory to you, I will rest assured, at least ah, this stomach absolutely hungry not to find."

"Look what you said. With this set of equipment, I can guarantee that your zero degree factory will have an annual output value of at least 100 million yuan in the next ten years!" Before Zhuang Jianye said anything, Peng Chuan put on a safety helmet and a mouth full of stubble, which made a frightening assertion to Wei Guangping.

Yes, Wei Guangping was really shocked. You know, today, relying on the unified purchase and marketing of the take-off factory, we can barely make the annual output value of the zero degree factory reach more than 7 million yuan, and the annual output value exceeds 100 million yuan. It's hard to imagine. You should know that the total output value of thousands of enterprises under the ministries and commissions is more than 100 million yuan.

Zero factory can produce more than 100 million yuan, which is a bit too alarmist!

"Wei Gong, you can't believe Lao Peng's words, but the judgment of mechanical equipment is still very accurate. Alas ~ ~ ~ Wei Gong, don't tell me, you just take this set of equipment out of the rags and assemble it. I haven't thought of imitating our own flexible tooling equipment on this basis?"

Zhuang Jianye agreed with Peng Chuan's judgment. He nodded his head and said a few words. He suddenly realized a problem and turned to Wei Guangping.

Wei Guangping was stunned immediately. He didn't think much about it. Didn't Zhuang Jianye ask them to sort out the spare parts of the equipment they had transported? Did you say you want to copy it? Why don't you remember? So he asked: "imitation? You didn't mention that, either? "

In a word, not only Zhuang Jianye almost fell, but Peng Chuan was also a faltering man.

Finally, I understand that zero degree factory air has the ability to lead a miserable life. I can't even see such a big gold mine in front of me. It seems that I should take it for granted if I can't lead a good life.

However, think about it. Tengfei factory has been killed all the way out of adversity. From leaders to ordinary employees, it has been deeply rooted in the hearts of the people for a long time. This is what Huang Feng said at the beginning.

So if you see such a good thing in Tengfei factory, a project leader alone will be able to win.

There's no way. The prospect of this kind of flexible tooling equipment is really great. Among other things, its excellent versatility can save hundreds of millions of tooling design and development costs for aviation manufacturers in a year.

Because of this, once this product is launched, it will definitely become the hot money pursued by major aviation manufacturers, just like the multi impeller shot peening machine.

In this way, not to mention the price of a piece of equipment, that is, the maintenance of logistics and the service charge for maintenance, the factory can make a profit.

Among other things, although the overall sales of the multi impeller shot peening machine sold by Tengfei factory have not improved, the overall profit of the whole Tengfei factory is second only to the export UAV, which is higher than the profit margin of the newly rising medical equipment.

The reason is that the annual maintenance service fees and spare parts sales fees are always maintained at a very high level.

After all, the advanced aviation professional processing equipment such as multi impeller shot peening machine is not a bicycle or TV set. It can be done well if it is disassembled and tampered with. Without the participation of professionals, the manufacturer does not dare to start at all under uncertain circumstances, and the most professional one in China is Tengfei factory, so what Tengfei factory earns is peace of mind.

Now there is another professional aviation manufacturing equipment which is more valuable than multi impeller shot peening machine. That is, Wei Guangping, an intellectual who only focuses on scientific research, is indifferent. Zhuang Jianye and Peng Chuan have long been full of gold.

Although Wei Guangping didn't have the concept of market and profit in his eyes, he had very good obedience. Seeing that Zhuang Jianye really wanted to imitate flexible tooling equipment, he was frowning and thinking of its feasibility. But the more he thought about it, he thought it was difficult and said, "we can still do mechanical equipment, but we can't do control system."

With that, Wei Guangping casually pointed around and said, "where do you see, where, where else They're laser tracking points and camera locators around the device.

Laser tracker is a kind of equipment that uses laser as measuring carrier and equipped with reflecting target ball. It forms a spherical coordinate measuring system with angle measuring mechanism rotating around two axes. It can not only measure static workpiece, but also track and measure moving workpiece or related combination. "

With that, Wei Guangping pointed to a few things similar to the size of a projector, and continued: "however, due to the high brightness of the laser, workers will have visual fatigue when they operate for a long time. Therefore, this set of equipment uses the camera and monitor as well as the fastener position recognition of the workpiece itself, and combines with the accurate measurement of the laser point to accurately locate the workpiece.

We have calculated that the positioning accuracy of this system can reach 0.125mm, which is higher than that of most of our special tooling equipment. But... "

Having said so much, this set of second-hand small flexible tooling equipment from Lockheed company of the United States does show its extraordinary ability. However, no matter how good it is, it still can't stand one. However, Wei Guangping's words turned around and revealed the fact that Zhuang Jianye and others could not help but frown: "in our country, whether in the laser field or in the monitoring field, we are thinking about the monitoring side It's not up to the technical level of this equipment. It's a second-hand equipment made in the United States in the late 1970s.That's all. It's more important to connect the computer control system of the whole set of measuring and monitoring devices. First, we don't have professional industrial control software. Second, we don't have the working condition database of aircraft components. Let alone imitation, it's not easy for this flexible tooling to produce ty-2 UAV platform. "

Hearing that, Zhuang Jianye could not help but frown. Just as he was about to ask why he could not produce his own UAV, Lin Guanghua, who came quickly, said, "the Yankees have locked up the industrial control software. This set of equipment can only produce several kinds of small aircraft structural parts according to the inherent software program, but it's not a big problem. Our UAV platform was originally built It is open-ended. With the accumulation of wind tunnel tests in recent years, the parameters can be adjusted according to the program settings of American software. "

Lin Guanghua, the first brother in the aircraft design of the take-off factory, gave a good or bad answer, and Zhuang Jianye was immediately relieved. It was obvious that this was the usual way for the United States to firmly hold on to the high-end aviation manufacturing equipment.