Chapter 984

Therefore, Boeing and Airbus are very cautious in dealing with the issue that Tengfei group touches the high-voltage line, but they subvert the management of the aviation sector in Russia and cut off the possible technological path of Tengfei group.

Then put pressure on Brazil to stop cooperation on regional airliners and cut off the economic source of Tengfei group.

As for Tengfei group itself, Boeing and Airbus have not moved. Instead, they have both cooperated with Tengfei group to set up a joint venture in China to produce key parts for the two giants.

In other words, instead of falling into the dilemma of idle capacity due to the termination of Brazil's cooperation in the next year, Tengfei group's capacity has become insufficient due to the intervention of Airbus and Boeing.

Moreover, on regional airliners, after losing the vest of ERJ, Tengfei group immediately launched TRJ. Through the coordination of aviation industry, aerospace industry, factoring group, CAAC and headquarters, several major domestic airlines and the vast majority of local airlines put their purchase intention of regional airliners in Tengfei group in the next few years.

In other words, the termination of Brazil's cooperation has not affected Tengfei group's domestic market share, and the iron plate is still firmly in hand.

Therefore, Boeing and Airbus's crackdown on the red line of Tengfei group is nothing more than taking off their pants and farting.

Don't the two giants know these things?

Of course, I know. The problem is that I can't help knowing, because at the same time when they cut off Russia's technology path and Brazil's regional airliner financial resources, Zhuang Jianye killed four European and American technology companies that produce satellite radiators, completely holding this subdivision in his hands.

And then Then there was the frenzied price hike.

It's not a one or two fold increase, but a ten or a hundred fold increase.

As a result of the crazy behavior of Tengfei group, the global satellite cost has risen by 11%, which makes the commercial companies who are ready to eliminate old satellites and launch new ones complain endlessly.

This is nothing. What Zhuang Jianye is even more ruthless is to break down the price of his own mid end carbon fiber composite materials, which immediately set off a price butcher like dumping rhythm in the global high-end material market.

Only in one wave, three American composite material enterprises went bankrupt; five of the six similar enterprises in Europe closed down, and the only French enterprise was nationalized, which left a root for Europe.

As for Japanese enterprises, of course, they lost a lot, but the good thing is that they have a strong family background, and most of them are high-end products, so they are supported.

However, it didn't take long to be happy, because Tengfei group has announced that it has made a breakthrough in high-end carbon fiber and is about to mass produce, which is bound to be another bloodbath at that time.

In addition, senior executives of Zhuang Jianye or Tengfei group often express explicitly or implicitly that they are ready to export production processes and complete sets of equipment for launch vehicles and high-end materials to Iran or North Korea.

The reason is very simple. Those bullied by giants have no money, so they can't starve to death. Since the normal money making is cut off, they should play some deviant ways. Anyway, money doesn't matter whether you are good or bad, as long as you can spend it.

Boeing and Airbus have to compromise under the pressure of other forces and consortia.

Thanks to Daewoo Group of South Korea, who has become a monk and engaged in aviation manufacturing, we don't know how deep the water is. Otherwise, we will never look at the financial statements and feel that Tengfei group is arrogant, because it is quite strong to be strangled by the two giants only because the financial statements are ugly.

Otherwise, if you look at today's aerospace manufacturing division of Daewoo Group, you will know that the two giants really crush Daewoo into a meat cake just like an ant.

"Mr. Zhuang ~ ~ ~ Mr. Zhuang?"

Looking at Zhuang Jianye, who is busy carrying equipment, a few questions from an island tune suddenly come to his ears. Then he comes back from the slogans and immediately looks at Mou Guangying, the leading Party in front of him Bah ~ ~ the former director of Daewoo aviation manufacturing division should be asked to smile as if nothing had happened: "en ~ ~ you say!"

Mou Guangying can't see that Zhuang Jianye just slipped away. But now, the leader of a domestic aviation enterprise he didn't think much of before, has become his big boss.

It's impossible to flatter him, because before the banquet ended yesterday and Zhuang Jianye left, he still remembered: "the whole set of equipment and production line is worth US $5.7 billion. What about you?"

No matter how stupid people are, Zhuang Jianye, the new boss, is questioning their value.

If this is put in the past, Mou Guangying will have to show his style. The problem is that at the banquet, he and Zhao Qianyi explicitly rejected Zhuang Jianye's good intentions. Now Daewoo Group has packed them up to Tengfei group without saying a word. If they are playing a noble role, Zhuang Jianye can make them poor immediately.

So at 6 a.m., Mou Guangying came to the gate of the factory. When Zhuang Jianye arrived, he took the initiative to introduce the foreign affairs inside and outside the aviation manufacturing factory that Daewoo was trying to build.

In order to show his familiarity with the aviation manufacturing industry, he specially led Zhuang Jianye to the machining workshop to introduce the advanced processing equipment purchased by Daewoo Group to his new boss. At this moment, the wg-300 whisker ceramic cutting tool specially used for nickel based alloy materials just launched by American green leaf company last year is the world that Daewoo Group introduced last year Top machining tools.As a result, he was spitting so much that he almost said that wg-300 whisker ceramic cutting tools were hard to find in the sky and on the ground. However, Zhuang Jianye, the new boss, seemed to be familiar with this. He didn't think wg-300 whisker ceramic cutting tools were great. On the contrary, he had spare time.

Is it true that Zhuang Jianye's reputation of being the best at aviation technology is false?

It's no wonder Mou Guangying has such an idea. People who know a little bit about aviation manufacturing technology tremble when they hear wg-300 whisker ceramic tool. That's why they regard this kind of tool as a treasure.

The reason is very simple. At present, only the green leaf company of the United States can produce this kind of props, and the application field of this kind of tool is nickel base alloy processing on aircraft engines which are even more high-end than aircraft.

As we all know, nickel based alloy on aeroengine is often used in turbine disk, turbine blade and other core parts, which is very difficult to process. Because the required state of some key parts of the engine is almost changed, the cutting fluid and coolant can not be used in the machining of nickel based alloy parts. This is not to mention that the temperature of the cutting tool and parts should not be too high during the machining, so as to avoid influence Minor changes in components.

In addition, the hardness and strength of nickel based alloy itself are among the best, so ordinary tools simply can't do fine machining for such parts.

Because of this, the early Ni based alloy aircraft parts, mostly using precision casting process, with a small amount of EDM and other processing technology.

It was not until the appearance of whisker ceramic tool developed by green leaf that the difficult problem of nickel based alloy production on traditional machining equipment was solved.

It can be said that with this tool, ordinary machine tools can process precision engine parts, which can be said to be the weapon of the whole aviation manufacturing industry.

As a result, Zhuang Jianye didn't pay attention to such a good thing.

Just as Mou Guangying introduced the cutting tools, he was thinking in a disorderly way. Suddenly, Zhuang Jianye interrupted him with a wave of his hand: "American products are just like this. When you come back with me, I'll show you what's better."

With that, he strode toward the factory building. Mou Guangying's heart thumped. A round face was full of incredible words. Did China have whisker ceramic knives?