Chapter 168

Pamighi plateau, located in southwest of the Yongye Kingdom, is a bilateral area communicating with the ancient man kingdom.? Because the average altitude is above 35oo meters, there are few people to and from at ordinary times. Apart from some indigenous primitive tribes, the pamighi plateau is an indisputable human exclusion zone.

But on this day, in the blue sky like floating color, there was a huge dark shadow shining with crystal brilliance.

It's a strange thing. It can't be said whether it's alive or dead. Its overall structure is a flat and huge transparent crystal. There is white silk thread in the crystal, which looks like cold ice... No, it should be said that it is cold ice.

Because when a plateau Eagle flew 100 meters away, it was frozen directly into an ice sculpture and fell down.

If it is cold ice, it must be dead. But why is it misunderstood as a living creature? The reason is that this huge ice about 2O meters long has the same transparent wide wings on both sides, and the style of the wings is similar to that of the swan. Every time you flap your wings, crystal ice plumes fall.

The sunlight on the plateau is fierce, shining the winged ice.

On the cold ice, several mysterious people in white robes are resting with their eyes closed. The endless freezing power of the cold ice doesn't seem to hurt them. On the contrary, their figure becomes more and more ethereal in the dense white air.

If you observe carefully, you will find that behind the white robed people, there is a frozen crescent moon embroidered on them all.

……

On the early day of the last ten days of the month of flowers, angel experienced a half month of depression. On this day, the consequences of the art of reverse phagocytosis were finally relieved.

He threw himself almost immediately into practicing the technique.

He took the lead in learning the basic techniques of epigraphy, hot melting and condensation. In his plan, there are two prerequisites for him to climb the sky tower. One is the alchemical weapon; The second is a set of defensive techniques.

Of these two prerequisites, learning set technique should not be a problem, but it takes some time to skillfully apply it. However, angel is uncertain about the production of alchemical weapons. After all, it is the product of the combination of two civilizations, and the future is uncertain.

Most importantly, angel didn't know if he could cross the threshold of alchemy. If you can't even become an alchemy apprentice, all other plans are Utopian.

Therefore, angel put all his attention on the hot melt method at the first time.

Hot melt method is the first threshold for alchemy apprentices.

The essence of heat melting method is actually the long-term resistance between fire element and magic to produce extremely high heat. Then control the range of high fever through the trick model to prevent it from hurting yourself.

This trick is just opposite to the trick of the three structures. The trick model is not to build the hot melt method, but to limit the high temperature of the hot melt method.

Angel took out a piece of paper, which was full of data and formulas. This is the result of the model derived for the thermal fusion method when he performed reverse phagocytosis a few days ago.

After remembering several key coordinate points of the model diagram, angel closed his eyes and entered the state of meditation.

The thinking space has been restored to Qingming. The "Lollipop" he built is alone in chaos, and the singularity is slowly rotating, purifying the original magic.

Angel did not care about the singularity, but released pure magic from the magic source to build a magic model of hot melt magic.

With the positioning of the Vientiane axis, the trick model was built in almost two or three seconds.

After the trick model of hot melt magic was constructed, there was no abnormality. It hung in the thinking space without collapse or disintegration, and there was no impulse to release.

Angel turned the trick model to his fingertips, still without any feeling or any trace.

"This model is really different. Even if it is suspended outside the body for a long time, it has not collapsed. It is solid like a hard stone." Angel whispered.

Since there is no problem with the model, angel simply starts to "warm up".

The simple explanation of the resistance of fire element and magic is to release the magic out of the body and rub with the external fire element.

This step seems not difficult, and the magic output to the outside world is very little, but he needs patience and control, which is difficult for ordinary wizard apprentices to do.

The so-called patience is to continuously output magic and warm up slowly. The time required for this process is determined according to the content of fire element in the air. In places where the fire element is active, the preheating time is about a few minutes, but in places where the fire element is lazy, the preheating may even take several hours, maybe more.

Basically, patience is not a step for a wizard apprentice.

However, the next step of control is the most difficult point in learning the hot melt method, and it is also one of the reasons why alchemy rejects most wizard apprentices.

During the warm-up process, magic should always be output from the body to the outside. Although the magic consumption is small, it must be continuously released with the same measure of magic.

A little more, a little less, even a little bit, will lead to preheating failure.

With precise control measures, it is almost difficult for wizard apprentices to do this.

……

Angel also began to warm up. The magic continued to output from the body to the body. When he first came into contact with the element of fire, it was very easy to bear it.

But after 2 seconds, the warm-up failed. The reason is that, like other wizard apprentices, the measurement of magic is not controlled accurately.

In the second experiment, angel carefully released the magic bit by bit. Under his high concentration, this time he lasted... 3 seconds.

Angel conducted the third, Fourth... Tenth test, and the highest record was to keep the magic measurement for 4 seconds. The others are basically hovering for 2 seconds.

In places where fire elements are active, this preheating takes more than two minutes. But he can't break through five seconds now.

Angel was suddenly depressed. Didn't he have the talent to learn alchemy?

At this time, the magic was almost consumed, and angel was in a bad mood. He simply closed his eyes and recovered the magic through meditation.

A blink of an eye, five hours later.

In the process of meditation, angel's mood gradually calmed down.

He also wanted to understand that it was normal to be hit, and nothing could be accomplished overnight. He will continue to try. If there is no way to stop the measurement of magic, it can only be said that he has no chance with alchemy.

At this time, the magic in the magic source was abundant again. Angel took out dry food and thought about how to control the measurement of magic while eating.

Control measurement is definitely not done carefully. Angel previously focused almost all his attention on control, and it is difficult to achieve perfect control.

Angel thought: human resources are always exhausted. Can we borrow external resources?

When it comes to external forces, the simplest way to control measurement is through pipeline quota. It's like drinking water with a straw. The straw can effectively limit the outflow of water.

But he can't put a tube into the thinking space. Besides, can magic fit into a pipe?

Pipeline... Quota

Angel repeated, flashing pictures in his mind. Suddenly, a picture full of dotted lines flashed in my mind.

"I thought of it! I can't plug a pipe, but I can make a pipe myself!" Angel's face flashed an excited color: "you can do it with the Vientiane axis!"

The Vientiane axis is the manifestation of the 36 bit spatial coordinate system positioning method after its completion.

The Vientiane axis transforms the thinking space into a collection of countless dotted lines, and each point can be transformed into spatial coordinate points through the Vientiane axis. Angel only needs to build a three-dimensional channel in the thinking space and use the Vientiane axis as the measurement standard. The measurement of magic output can not be controlled!

Angel thought of this and immediately began the experiment with excitement.

It took a little half a day for a channel determined by the Vientiane axis to connect outward from the magic source.

Angel took a deep breath and began to draw magic from the magic source. He carefully watched to prevent the measurement of magic from spilling out of the channel of the Vientiane axis.

2 seconds, 3 seconds,... 19 seconds, 2O seconds.

After 2O seconds, preheating fails again.

However, angel did not show a depressed expression this time, because he was very sure that he had solved the problem of measurement! From 4 seconds to 2O seconds is the evidence!

The reason why he failed this time was not that the measurement was not well controlled, but that the rate fluctuated.

As long as the problem of measurement is solved, other problems are small problems.

It took another period of time for the rate problem to reach a basic balance with his constant attention.

When the measurement and rate are solved, angel turns on the preheating again.

2 seconds, 3 seconds,... 19 seconds, 2O seconds... 1 minute, 10 seconds... 1 minute, 30 seconds

Two minutes later, angel failed again.

However, this failure has nothing to do with technology, but... His finger was burned.

He has been paying attention to solving the problem of preheating, but he has forgotten one thing. The position of preheating must be within the magic model, otherwise, it will only be burned sooner or later.

……

The third day of the late flower month.

Angel moved the stove in the kitchen to the basement.

Light a fire.

The hot heat wave spread slowly in the basement.

Angel sat by the fire, closed his eyes and began to meditate. After about half an hour, angel stretched out his spiritual tentacles and felt the activity of fire in the air.

-- with the stove as the center, the activity of fire element is several times higher than before.

Angel felt almost right. He stood up and went to the pile of wooden boxes on the other side of the basement. These wooden boxes were filled with non-standard materials purchased from promi alchemy.

Angel took a piece of metal from the wooden box, which was red in black.

This is the demon blood copper, which is the most material he has purchased. It is the lowest level in the blood copper series. It is a copper mine contaminated with demon blood and kept for many years.

The hardness and wear resistance of items made of earth demon blood copper will be greatly improved, and there is little chance to obtain special effects.

Angel took out the demon blood copper and went back to the fire.

Angel uses the hot melt method to build a trick model, and then outputs magic to slowly integrate with the fire element, and time passes bit by bit.

Fifteen minutes later, hot melt molding!

Angel can feel the intense heat in the model of fingertips. However, bound by the model, there is no sign of leakage.

Angel put the demon blood copper in the heat melting method.

With the passage of time, the demon blood copper slowly showed signs of melting in the hot melting method