2350 Episode 2344 Let's go visit Carol. (The machine tool for the Howarth Chamber of Commerce is ready.)

Sutera Manufacturing of Carol.

When Takeo went to play, he was doing some kind of final exam, so he was present.

Gwiiiiiiiiiiiiiiiiiiiiii

The craftsmen cut the wooden planks vertically one after the other.

Takeo looks at the situation with his true face.

“We use the drive of the sewing machine to rotate the circular saw.

I figured out a way to fix the saw and cut it by pushing the board deeper.

The difficulty is that it only cuts straight lines. ”

Carol says.

Takeshi nodded without saying anything, but his eyes stared at the point where he was cut.

"Also, for the width of the cut, we install the bar parallel to the direction of cutting the plate, and press the edge against it so that it can be cut straight.

Since the position of this striking rod can be adjusted, various widths can be made uniform.

Cut with this device to the shortest 100mm.

To narrow it down, we use another small circular saw that rotates. ”

Carol says.

"... Mr. Carol, where are the safety devices?"

Takeo listens as he looks at the device.

“Yes, to keep your hands from getting caught when you push the wood, you need to cover the edges with an iron cover that covers the artisan's fingertips.

The fingers and hands do not come out before the cover when pressed. ”

"Attach safety devices to circular saws as well.

There is a simple and good fence-like cover at the front of the blade, so that it can be stopped by the fence even if the finger comes out before the cover when pressing.

Those who live in this city, such as Sutera Works, Haworth Chamber of Commerce, and Roach Workshop, may say, "There are people nearby who can take care of you, so it is okay to do so", but it is also conceivable to distribute it to areas where such people do not reside in future sales.

Consider double or triple safety measures.

The sense of an artisan that cannot be nurtured over a long period of time is made up of fingers and hands.

Protect the art of sensation. "

"Ha! I was awed."

I will also mention this in the instruction manual. ”

Carol says as she lowers her head.

... and the sawmill... in this case, the main part of the sawmill is a circular saw... but I thought the band saw would come...

Ah, is it easier to maintain and replace a circular saw? "

Takeshi muttered as he tilted his neck at the device.

"What's an obinoco?...?"

Carol asks with sharp eyes.

"Huh?... a band saw is called a band saw."

By the way, I think this circular saw is called a circular saw.

To a large extent, the saws you use to cut trees may also be a type of band saw. ”

Hmmm... does a normal saw move up and down?

Carol says as she thinks.

"No, it's not.

The part of the blade of a normal saw... at a depth of about 20 mm... it is a method of cutting wood while turning it in one direction......

I need the blackboard right away!

Carol tells the craftsman who was nearby.

"Yes! Now!"

The artisan brings the blackboard in a hurry.

“Yes, thank you.

Um... there's a seating surface here for processing wood, right?

So, take it down vertically from here... and go down in the up direction... and go up and then back to the surface to be machined.

It cuts off in a series of movements. "

Takeo briefly explains as he writes the elliptical line.

Master Kitamizato, what is the good thing about this band saw?

"Hmm... is it heat dissipative?"

Cutting things gives you heat.

That's true even for ordinary saws.

The saw itself becomes hot when the tree is cut, which means that the precision of the cutting is... poor.

However, when the band saw is cut, it is cut again at the same place, and the time it is touching the air is longer than a circular saw or a normal saw, so even if it becomes hot, it will be cooled and the sharpness will be restored a little.

That's why it can last longer than a circular saw. ”

I see.

Carol nods.

"The circular saw has good maintainability, right?

I can exchange it as soon as the sharpness becomes worse. "

"There's a good place for circular saws and band saws."

Yeah, well, you can try a lot and decide what you want to use it for, but for now, it's a circular saw.

“Yes, I will wholesale this safety precautionary item to the Howarth Chamber of Commerce.

It's used to make pencils. ”

"The cutting out of the ingredients of the pencil is likely to be faster than doing it by hand, but...

Carol, how soon will it be? ”

Takeo asks.

"That's right... if you just say the cutting process, you can do 10 times faster than cutting by hand.

That's all I have to say right now, but I think it would be nice if I could just put it through the device once from a single board and make it with as many pencils as possible. ”

"I see, it's like installing several circular saw blades at equal intervals..."

"Yes... but it's a circular saw and a band saw... I will continue my research in the future."

“Yes, please.”

Takeo told Carol.