34 Chapter 34 Heavy Equipment Filling the Blank in China (Recommendation and Collection)

Xu Youkui loves face, his eldest son bought a car, of course he wants to drive back to his hometown to show off.A second-hand Mitsubishi pickup truck cannot be regarded as a car in the strict sense, but that's what he thinks, no one can do it.

This time he sent a bus to send his father home. Xu Zhenming was a special case and filled out the dispatch form in his own name.Even so, this matter still complies with Yiming's factory regulations.Because Xu Youkui and Li Xianghe are both minority shareholders of Yiming Company, there are records on the employee list.

The two of them were arranged as minority shareholders of Yiming Company and signed the equity agreement.Xu Zhenming has profound meaning in this point.He is preparing for the company's future listing.Once the country promulgated the new labor law, he was ready to pay his parents a social security so that they would have a stable retirement salary in the future.

After sending his father away, Xu Zhenming went to the second floor of the office, ready to explain and then return to the office of the machine repair shop to draw drawings.The office building is doing simple interior decoration, the noise is not small, and the desks and chairs are arranged in a mess.

Because of the tight time, Yang Hongliang led the people to install the ceiling in the room; Liu Chungen was painting the walls in the room with white paint; Li Daoben and several people were replacing the damaged tiles on the roof.In short, they are all rushing for the construction period and strive to deliver the office building to Yiming Company within four days.

The new Minister of Finance Li Lan saw Xu Zhenming coming, covered his nose with a newspaper, frowned and asked, "Mr. Xu! Why use white lime to paint the walls of our office? Isn't it better to use latex paint?"

"There are chemical materials in the latex paint that can damage the human body! We don't have time to wait for the smell in the room to clear before moving in to the office. Let's just do it!"

Xu Zhenming explained patiently.He then asked Lilan if the company had any money recently.

Li Lan smiled and said: "Mr. Xu! The Agricultural Bank of China has not yet taken down the loan, but the payment for the sale of second-hand machine tools has arrived first, with more than 3.6 million yuan!"

"First arrange for the more than one million owed Suning General Machine Tool Company! Remember, they need to issue additional invoices to deduct the tax! The second-hand machine tools, CNC machine tools and machine tool transformation services we sell must be invoiced. !"

Hearing the good news, Xu Zhenming's brows stretched out.He ordered parts for CNC machine tools, parts for computerized embroidery machines and parts for computer engraving machines, totaling more than 1.8 million yuan to be paid in a hurry.With this fund in the account, Yiming's cash flow is finally smooth!

Li Lan didn't understand Xu Zhenming's operation, and frowned at Xu Zhenming.She approached Xu Zhenming and looked very intimate. She lowered her voice and asked, "Mr. Xu! It is possible to sell second-hand machine tools like us without billing and paying taxes. Why do you want to do business?"

She made a lot of sense. Many small bosses in today's society operate in this way, and no one has an accident!

"Yiming's business operations must be done by business. You only need to transfer the hundreds of thousands of dollars that I invested in privately to me! We have to look forward: After paying taxes in accordance with the law, once the company’s financial statement data is good, The government will reward and banks are willing to lend, which is beneficial to the development of the company; secondly, our company has to declare projects such as high-tech enterprises, small technology giants, and the Spark Program. It is impossible without good financial data..."

Xu Zhenming didn't hide his treasures, and told Li Lan about his own business philosophy.This kind of routine was very popular in later technology companies.It seems to suffer in the short term, but in the long run it is very cost-effective.After all, once the government supports a technology-based company, the day to take off is just around the corner!

After handing over the signed equity agreement to Sister Han, Xu Zhenming still rode a clanging bicycle back to the machine repair shop.He has basically completed the drawings for the transformation of the two heavy-duty sleeping cars, and he needs to review them before drawing up a sketch.Busy till the afternoon, the old-fashioned printer started to work, spitting out the printed mechanical drawings of the heavy-duty CNC sleeping car like a snail.

At this time, both Sun Chao and Wang Qiang walked into the office holding a pile of pencil sketches.Both of them are very hard, because they don't have enough sleep, their eyes are red.

"Mr. Xu, the sketches we are responsible for have been drawn! When shall we review the drawings?"

Although Sun Chao was very tired, his eyes flashed with excitement.

Xu Zhenming raised his eyes to look at Sun Chao and Wang Qiang, and smiled and told them: "You two hurry back and rest. Let's review the drawing tomorrow!"

"Mr. Xu! You tell us to go back and rest now, and we can't sleep either!" Wang Qiang smiled excitedly.

Neither of them has participated in such an important large-scale project, and they are very excited these days.Passionately supports them to stay up late and work overtime to complete the design tasks assigned by Xu Zhenming.

"Mr. Xu! The sketch must be finalized in time, and the drawings and photos will be traced later. It will take several days for the official blueprint to come out. I am afraid it will delay the progress of the project!"

Sun Chao had been in the technical department and had more experience. He yawned and gave Xu Zhenming suggestions.

"Go back to sleep! Come to discuss the drawings when you have a clear head! Also, you have to learn to use CAD software to draw in the future. The electronic version of the drawings is easier to composite the data of the workpiece size! Go back!"

Xu Zhenming drove Sun Chao and Wang Qiang back home to rest.

"Computer drawing? I have never touched a computer, how can I use CAD software to make drawings?"

"Yes! Computers are so expensive, who can afford it!"

"Computer drawing is a trend, we must learn!"

After Sun Chao and others heard that they would learn to use CAD software to draw drawings, they all talked quietly.They don't want to go home before get off work time has come!

"The company has already prepared computers for you. Then there will be teachers training you to use CAD software for drawing. You all get off work, rest early, and come here for a meeting tomorrow morning!"

Xu Zhenming smiled and drove everyone out of the office.

The crowd left with unfulfilled intentions.

In the morning of the second day, in the office of the machine repair shop, all the employees who participated in the renovation project of the heavy-duty sleeping car gathered together.They looked at the small blackboard behind Xu Zhenming, looking very excited.Because the blackboard reads: "The heavy-duty CNC lathe project research meeting to fill the gap in China"

These few words were specially written by Xu Zhenming to motivate his employees.

At present, several large domestic machine tool factories can also produce heavy-duty CNC lathes.However, the heavy-duty CNC machine tools of these companies: the purely domestic products are relatively backward in technology; the joint venture products have no independent intellectual property rights.

If Yiming's heavy-duty CNC machine tool can successfully tackle key problems, after successful transformation, it will be the first domestically made high-tech product with the most advanced control technology and independent intellectual property rights!

Therefore, these young people who are lucky enough to participate in the project are very excited!

Not long after, Xu Zhenming hung the sketches designed by Sun Chao and others on the small blackboard, and while looking at the pictures, he explained the design concept of the original mother picture to everyone.

This kind of design by Sun Chao and others was very common in later design institutes. They used a set of master drawings to modify, and the speed of drawing with CAD software was faster.The engineers of the design institute calculate performance pay according to the amount of drawings drawn!

"This lubrication system is fine!"

"The electrical piping layout is also more reasonable!"

While looking at the drawings, Xu Zhenming expressed his views on the drawings.

He did not expect the young people who came to the meeting to give him any good suggestions, but he was cultivating them and cultivating talents for the development of the company.After hanging up the drawings of the hydraulic system, he couldn't help frowning and said: "The schematic diagram of this hydraulic system is very unreasonable. It needs to be redesigned!"

"Mr. Xu, why?"

Sun Chao couldn't sit still, and blushed and asked Xu Zhenming.

"Sun Gong's drawing layout is very clever! How can it be unreasonable?"

"Yes! The arrangement of these hydraulic lines looks very scientific, how could it not work?"

At this time, the young employees attending the meeting were very puzzled and were talking in low voices.They are all mechanical and are insiders.

"The hydraulic system provides power for our heavy-duty CNC machine tools, which is very important! With a pressure of 160 kg, what will happen after this hydraulic pipeline?"

At this time, Xu Zhenming asked everyone with a smile.

Everyone shook their heads.

"Either the pressure is not enough, or there will be pipe bursts or oil leakage. Do not have a good-looking layout of the hydraulic pipeline, mainly to make the fluid flow in the pipeline smoothly!"

Seeing that everyone is inexperienced, Xu Zhenming didn't sell it, to explain everyone's doubt.Immediately, he took out a pen and redrawn the hydraulic pipeline layout on the sketch.The newly drawn piping diagram is not as good as the one designed by Sun Chao, but it is in line with the layout of this heavy-duty CNC machine tool and is simple and practical.

After understanding the principle of hydraulic system, everyone felt that Xu Zhenming's revised hydraulic schematic diagram was the most scientific and reasonable.Everyone took out their own small notebooks and recorded the experience gained today.

Next is the drawing drawn by Wang Qiang, who is mainly responsible for the appearance design of heavy-duty CNC machine tools.The hard-line, square-and-corner design that Xu Zhenming likes is adopted, and it's all right.However, the installation position of the self-equipped small electric hoist for the CNC machine tool he designed has some defects.

"This kind of machine is equipped with a five-ton electric hoist, which is mainly used to assist in workpiece clamping. The installation bracket of the electric hoist cannot be arranged on the machine base! This drawing needs to modify the design plan!"

After reading the drawings, Xu Zhenming used a black pen to draw unreasonable places on the sketch.

Most people didn't understand Xu Zhenming's meaning, and looked at Xu Zhenming with surprise.

"The vibration force of the electric hoist is very large when it is working, and it will damage the base of the machine tool for a long time, and even affect the accuracy of the machine tool!" At this time, Sun Chao who saw the problem spoke.

He was right. Xu Zhenming smiled and nodded: "Sun Gong has come up with the idea! This set of drawings needs to be redesigned, and Wang Qiang's team needs to cheer, don't affect the progress!"

Wang Qiang and others blushed, nodded with a wry smile.

The following drawings are designed by Xu Zhenming himself, and are also the most critical and core part of this heavy-duty CNC lathe transformation.After this transformation, the original heavy-duty sleeper has been completely different, and many structures have changed.

Xu Zhenming didn't mean to invite everyone to review the drawings together, but rather to teach the employees present courses in mechanics and machine tool principles.Everyone listened attentively, and from time to time recorded the main points in their small notebooks.

An hour later, the plan review meeting ended.Xu Zhenming is going to arrange for Sun Chao to be the head of the heavy-duty CNC lathe renovation team, and he will transfer Wang Qiang out to immediately start to rebuild a simple machining center.

This machining center is modified on the basis of a small horizontal milling machine, and a machine head is prepared to install the drill.In terms of CNC machine tools, this is called a four-axis linkage machine tool.Two working heads can simultaneously process the workpiece on the fixture.

However, affected by the accuracy of the machine tool itself, the market value of this machining center is not large, and it can only be used as an experimental product in the factory to test data.

When Xu Zhenming was about to issue an appointment, the fat Zhang Gui knocked in.He was smiling all over his face, and his eyes narrowed again."Yo! In a meeting! I didn't bother everyone! Hehe!" He smiled and sat down.

Now that Zhang Gui is back, Xu Zhenming does not want to call Wang Qiang out, for fear that it will affect the progress of the heavy-duty CNC large sleeper project.He arranged for Sun Chao and Wang Qiang to take charge of the project, and asked them to start the action immediately, and the blueprint was to come out in two days.

After Sun Chao and Wang Qiang received instructions, they started to get busy.Xu Zhenming led Zhang Gui out of the office of the machine repair shop and walked toward his temporary office.

"Brother, why did you come back early?" Xu Zhenming asked the fat man Zhang Gui on the way.

Zhang Gui didn't answer, but lowered his voice and said, "Little Junior Brother, come to your office to speak!" He was mysterious, as if there was something in his words.

Seeing this, Xu Zhenming didn't ask more questions, led the fat man Zhang Gui into his office, and immediately locked the door.Afterwards, he took out a Hongmei cigarette, handed one to Zhang Gui, then lit another one, and waited for Zhang Gui to speak quietly.

Fatty Zhang Gui is impatient, and he really can't hide the secret.He took a puff of cigarette, his face turned red, and he asked with a serious expression: "Little brother, I brought back two news from Suning Second-hand Machine Tool Market, one is good news and the other is bad news. Which one do you listen to first? "

"Good news!"

Xu Zhenming breathed out a smoke ring and said lazily.He was a little tired, so he leaned on the back of the wooden chair and stretched out a pair of long legs.

"The good news is: The business of CNC machine tool transformation in Suning's second-hand machine tool market is very hot. There are currently more than one hundred orders and I have brought back all their orders and contracts!"

This news is really good!

The transformation cycle of a CNC machine tool does not exceed three days, and the cost of all spare parts does not exceed 20,000.After the completion of these orders, Yiming will get a net profit of nearly two million yuan.

Thinking of this, Xu Zhenming smiled and said, "Brother is great! In addition to the performance award, you also have bonuses this month!"

"Hey!"

At this time, Zhang Gui sighed again.He frowned and said, "Little brother! The bad news is: Huitong in Suning's second-hand machine tool market is ready to dig your corner!"

"Oh?"

Hearing these words, Xu Zhenming straightened up from the wooden chair, staring at the fat man Zhang Gui with bright eyes.