310 Chapter 309 The fastest research and development project (for subscription)

"From the workmanship point of view! It should be our Yiming company's frequency conversion motor is the best look!" Xu Zhenming picked up two frequency conversion motors of the same model and carefully compared them.After putting down the motor, he smiled and told the objective facts.

Seeing the boss Xu Zhenming praised the results of his labor, Duan Meisheng grinned at this moment, "Hehehe..."

At this time, Xu Zhenming frowned and asked him: "If these two inverter motors are mass-produced, which one will cost less?"

"Haha...this, this...it should be that the cost of Sanlin variable frequency motors is much lower!" Duan Meisheng looked a little embarrassed, and personally said what Xu Zhenming was thinking.

Think about it too.

Although the housing of the variable frequency motor produced by Yiming Company is also a steel casting, it needs two processing techniques, such as precision turning on a CNC lathe and internal processing by a machining center, to achieve this exquisite appearance.

Thinking of this, Xu Zhenming said earnestly: "Director Duan! There is no market for your product. Domestic air-conditioning companies are holding air-conditioning battles, and the control of parts costs is particularly strict. Will they choose our products for parts?"

"Why don't they support the products of domestic enterprises. Without domestic accessories to ensure the safety of the supply chain, what if a foreigner suddenly runs out of stock?" Duan Meisheng felt helpless.

He has worked for Sanlin Company and knows that Sanlin Company usually chooses several suppliers to ensure the safety of the supply chain.The ex-factory prices of these suppliers are different for the same accessory.

But for domestic companies, the concept is still a bit early.

Thinking of this, he couldn't help worrying about the future of the variable frequency motor he had just developed.Every technician will treat the products he invented and created as children.The child has no future, and Duan Meisheng can't be happy!

Taking a look at him, Xu Zhenming smiled and said: "According to the thinking habits of the Chinese people: the price of domestic products should be much lower than the same model abroad. Therefore, our variable frequency motors should be vigorously tapped, and if the quality and performance are not reduced, we must Vigorously reduce costs!"

"This..." Duan Meisheng nodded solemnly.

He already knew what the boss Xu Zhenming meant, and he wanted to redesign the manufacturing process of the variable frequency motor to reduce the cost reduction to the lowest limit.

After thinking about it for a moment, he frowned and said: "The only way to find a qualified precision foundry to make the housing of the variable frequency motor, the blank of the rotor system, etc. It is just that such a company is not easy to find, and our Yiming Company will definitely not Go and invest in another foundry factory, right?"

"Then cultivate two precision casting factories! One is in Jiujiang City, and the other is in Nan'an City!"

"Okay Mr. Xu! I will pass your instructions to the purchasing department!" Seeing Xu Zhenming's determination, Duan Meisheng felt much better.

He was afraid that Xu Zhenming would hesitate and would cut off the variable frequency motor project.In this case, he smiled and asked Xu Zhenming: "Mr. Xu! Should we mail the prototype of our inverter motor to the office in Pengcheng?"

The sales clerk in the Pengcheng office has already docked with Ms. Dong, ready to visit Ms. Dong again with samples of the variable frequency motor.And under the recommendation of Miss Dong, I went to dock with the technical department of Lige Company.

"Samples must be mailed! And all types of inverter motors must be mailed. Our Yiming Company is an important partner of Lige Air Conditioning. Under the same conditions, they will definitely give priority to our products. Otherwise, make air conditioners. With so many companies, why should we choose Lige Air Conditioning?"

At this time, Old God Xu Zhenming said.

He chose to get on line with Miss Dong also premeditated, not because she was a celebrity in the future.In the future, Xu Zhenming must also be a celebrity in the manufacturing industry. Who can predict his future?

"Okay Mr. Xu! I will immediately follow your instructions to arrange work!" At this moment, Duan Meisheng's brows stretched out, full of expectations for the future of the inverter motor.He knew Xu Zhenming's personality and never said anything unsure.

After the voice fell, he stood up excitedly, ready to greet Xu Zhenming and leave.

At this time, Xu Zhenming stopped him: "Wait for the manager of the section! On August 28, you are going to visit Jiujiang City with me. First, we need to arrange the transformation of the variable frequency motor production line; second, Well, go home to discuss with your lover, the company is going to transfer your lover to the headquarters to take up a post."

"Ah? Okay, good Mr. Xu! Thank you so much...Is this arrangement appropriate?"

Hearing this, Duan Meisheng spoke incoherently with excitement, and his pale face suddenly turned red, obviously very excited.

Seeing his appearance, Xu Zhenming waved his hand: "Appropriate! It must be convenient! Oh... Regarding the invention patent of the frequency conversion motor, the company is ready to apply in the name of you and Wang Zhizhong. Regarding the patent royalty, the company will also give a certain amount Cash reward!"

"Thank Mr. Xu! I, I will definitely work hard!" Duan Meisheng bowed to Xu Zhenming excitedly, and left as if stepping on cotton.

He did not expect that Xu Zhenming would actually pay him royalties.This matter is done righteously, and he can't care too much.Yiming's income is also good, and all aspects are considered very thoughtful.

"There is a future in such a company!" He whispered, and decided to give up the idea of ​​quitting again.

At this moment, Huang Kai met him head-on with a pile of documents, and greeted him with a smile on his face: "Hello, Director Duan! What is so happy about?"

"Haha...nothing! Are you looking for Mr. Xu to report work?"

"Yes! Is Mr. Xu here? Are you busy?" Huang Kai smiled and inquired about the news.There is always a smile between his eyebrows, which is obviously a happy event.

Seeing this new colleague who has joined the company's technical team, Duan Meisheng smiled: "It's time to get off work, Mr. Xu shouldn't be busy. He was still in the office just now!"

Hearing this news, Huang Kai jogged up and arrived outside Xu Zhenming's office in two steps.Knock on the door for instructions, luck is good, Xu Zhenming has time to receive him.

"Mr. Liu! Put your work in your hands. On the morning of August 28, you will go to Jiujiang City with me. What? There are financial difficulties, and the project in Binhu District will be delayed. No! This project is Our Yiming company’s key projects must be capped before the Spring Festival. Don’t worry about money, the head office will arrange it..."

Xu Zhenming was answering the phone and saw Huang Kai coming.While speaking, he pointed to the chair in front of the desk and motioned Huang Kai to sit down by himself.

After hanging up the phone, he smiled apologetically at Huang Kai: "Wait a moment, I have a few more calls to make arrangements for work in Jiujiang City."

Later, he called Sister Han, Li Lan, Tian Wandong and others. One was to arrange funds for Binhu Community, and the other was to arrange for them to go to Jiujiang City to participate in the signing ceremony with Liu An.As for He Lu, he plans to contact him before going to bed at night.People are busy now, so it's not easy to bother.

"Group leader Huang, what are you looking for?" After hanging up the phone, he asked with a grin.

Huang Kai saw that Xu Zhenming had finally finished the long phone call, and he unknowingly let out a sigh of relief: "Hu... Mr. Xu! The prototype of the CNC plasma cutting machine has been made. Where can I do the test?"

While speaking, he handed a stack of technical drawings and materials to Xu Zhenming, waiting for Xu Zhenming's instructions.

Huang Kai had invented the plasma cutting machine when he was in Nan'an Electric Welding Machine Factory.According to the process of new projects of state-owned enterprises, this is to be reported to the city and then to the province.As long as the paper is okay, the city will issue awards and certificates, but not necessarily in the province.

However, at this juncture, Yiming suddenly acquired Nan'an Electric Welding Machine Factory.It also interrupted the rhythm of Huang Kai getting the certificate.Fortunately, Yiming Company just needed the technology of this plasma cutting machine. Huang Kai saw the hope before staying. He improved the plasma cutting machine he invented and installed it on the CNC flame cutting machine.

Ever since, Yiming Company developed the fastest CNC flame plasma cutting machine, and it took out a test prototype so quickly.Just after the test was successful this afternoon, Huang Kai was so excited that he ran all the way to the R&D building to ask Xu Zhenming what to do next?

"Let's do it! You arrange your team members to install the CNC flame plasma cutting machine in the large-scale riveting and welding parts manufacturing base! I will go up tomorrow to take a look at the product. How to determine the plan for this project, wait for the product to be planned! "

Upon hearing this news, Xu Zhenming said with a smile.

He didn't expect that Huang Kai's technical team would be so powerful, and it took a few days to produce results.Think about it, too, the key to the CNC plasma cutting machine is the plasma cutting machine.With this key equipment, the CNC flame plasma cutting machine is a matter of course.

"Okay, Mr. Xu, I'll work overtime tonight! I will finish this task all night! Hehe..." Huang Kai said with an energetic smile.

He greeted Xu Zhenming, and left with a big smile.

Seeing his departure, Xu Zhenming decided to also give this talent who joined Yiming with technology a royalty, and then apply for a patent for the CNC flame plasma cutting machine.

The next morning, he asked Er Liu to drive and sent him to the blanking workshop of the large riveting and welding parts manufacturing base.

This workshop covers an area of ​​about 10,000 square meters, and the walls are freshly painted white.Several ventilation systems have been installed above the plant to extract the smoke generated when steel plates are cut in the workshop.

In the workshop, ten CNC flame cutting machines have been installed.These CNC flame cutting machines are lined up and look spectacular.This kind of CNC blanking production scale can blank about 100 tons a day and night.Not to mention the Nan'an area, even in the whole country, it is also a relatively large-scale blanking workshop.

Ten CNC flame cutting machines are all working at this time, cutting medium and thick steel plates.One of them is a CNC flame plasma cutting machine, but it uses a plasma cutting nozzle to cut steel plates.

The "pupupupu" sound made by this device, sparks splashing everywhere, attracted the attention of Danili Italians.