Chapter 333： : Does the machine really meet the requirements? Ask for all!

Back in the office, Ye Fan was still apprehensive about the sparks and lightning all the way.

The van is really too fragile, if it is faster.

May be disintegrated.

As soon as Ye Fan sat down, news came from Lab 2.

Under Xu Ziang's leadership, the machine tool for producing magnetic levitation was finally researched, and it was in line with Ye Fan's requirements.

Ye Fan walked non-stop toward Lab Two.

It is already two or three o'clock in the middle of the night, and the lights in the second laboratory are still flashing.

Obviously they were working overtime, so hard that Ye Fan touched his nose with guilt.

Walked into the laboratory.

A group of scientific researchers was quite excited around a machine.

This machine was built by them one day and one night, and everyone didn't sleep this day and night, their eyes were dark, and there were also a few older men with their eyes open.

"The boss is here?"

Wow.

A group of people quickly turned around and looked at Ye Fan.

"Tough work for everyone!" Ye Fan looked at them solemnly and said, the first sentence he came up did not ask the machine tool to make it? That's because it feels unnecessary. Everyone is so desperately studying this machine tool, and you are the first to care about the machine tool. This is quite unfair to them, and even they will complain.

But Ye Fan's first sentence was to comfort them.

All of the members of the research team suddenly became rosy.

"What's hard, boss, it's been a month, I feel like we're so useless."

"Yeah, we failed the boss. We should have completed it earlier. I didn't expect that it took so long to start the second project in the first or second group. We just researched it. I do n’t know if the results are OK . "

Everyone shivered.

Obviously moved by Ye Fan's words, Ye Fan didn't reply, because he didn't know what to say.

Saying something that touched them seemed too arrogant and artificial.

Except for this, there is really nothing to say, is it?

Ye Fan approached the machine tool, directly started the power supply, and began to check whether the machine tool meets the requirements for the production of magnetic levitation engines.

Hum.

The machine tool emits a roar of sound and is accompanied by a burst of electric current. The so-called production maglev engine is specially designed to produce a device for controlling magnetic force, and this device is quite complicated.

Through the display, you can see all the controls inside the machine.

Inside the machine, there are countless small robotic arms and various tool calipers. This is the latest generation of precision machine tools.

With the start of the machine, the entire production plant is up and running.

"Ready to inject raw materials!"

Integrated automatic machine tool, as long as the material is injected, the machine tool will produce the magnetic levitation engine device according to the scientific and technological data prepared in advance.

Upon hearing the words of the boss, everyone immediately acted.

Everyone is very passionate, and they haven't had time to experiment yet.

They also want to see if this machine tool can be used in the end, does it not meet the requirements of the boss.

With the injection of raw materials.

The sound of the entire machine tool is much louder, and the mechanical arms inside the machine tool can be seen through the display, which will process and decompress many raw materials.

One precision part after another is produced.

Every time a part is produced, Ye Fan will hold it in his hand and start to compare.

Precision is enough.

But there is a problem, the quality is far behind.

The core device of the magnetic levitation engine is specifically designed to control the magnetic force. The machine tool of that device cannot be produced. It must be researched and produced by itself. The things they produce are other core components and shells of the magnetic levitation engine. We must know the device that controls the magnetic force. If the shell is not hard.

Will cause the entire enclosure to be crushed magnetically.

Immediate loss of ability to control magnetic force.

"Is this an aluminum alloy?" Ye Fan asked.

"Yes boss, rub the aluminum alloy a little, and it will achieve 100% effect when precision cutting and assembly!" Xu Ziang said aside.

Ye Fan shook his head when he heard this: "The thing I want to produce must not have flexible properties, and aluminum alloy is not."

Everyone was surprised when they heard what the boss said.

If you do not use aluminum alloy, then other materials will cause precision problems.

As a result, the entire precision machine must be rebuilt and upgraded.

Doesn't that mean that the success of their hard work is wasted?

"There is no problem with the machine tool. Graphene is used for the material!"

Graphene?

That is stronger than any material. When cutting and combining graphene, there will be a huge gap in precision.

"Boss, graphene is not ..." Xu Ziang asked with a frown.

Ye Fan raised his mouth and smiled. "Using graphene is my first plan. I only need you to produce precision machine tools. As for how to cut and combine graphene, I already have a solution."

When all the researchers at the scene heard this, they all murmured.

They don't understand how such a hard material like graphene can be cut with high precision?

You have to know that graphene is a tyrant in a two-dimensional material.

In terms of cell phone assembly, the current state-of-the-art machine tools and cut-out cell phone parts are assembled with great gaps. This is also a shortcoming of the factory of their future technology crystal company. Everyone knows it well ruthless.

Even mobile phones can't do 100% precision, so how to cut graphene?

"Bundling the machine tool with the graphene production boiler, in the stage of graphene production, while graphene has not been completely cooled, it can be cut and combined. When it cools out, it will not affect the graphene factor and protons. Wait."

Wow.

Ye Fan said this.

All the researchers were staring at each other and suddenly realized.

"It turned out to be such a thing, why didn't I think of it? Cutting the graphene before it has been completely cooled, even if it is cooled, that's 100% precision."

"Yeah yeah ~ www.novelhall.com ~ In this way, we can solve the problem of graphene cutting!"

"But it is extremely difficult to transform a graphene production boiler!"

Everyone talked eloquently.

Ye Fan looked at them with a smile and said, "How to reform the graphene boiler requires you to study a lot. This is the second task entrusted to you. Now you go back to sleep quickly. Want to be immortal? "

Everyone was excited again when they heard what the boss said.

Do they have a second mission?

To transform graphene boilers, we must know that graphene has always been the company's core technology. People who are not involved in graphene research cannot be contacted.

But this time the boss actually let them touch, can they be unhappy and excited?

.....