Chapter 210： Detailed description of the transfer station

The train clanged forward, and before long, a large light appeared at the end of the unchanging tunnel.

Then a small platform appeared in front of everyone.

This platform is only a few meters long and only three meters wide. Next to it is a huge steel door, the size of which is enough to squeeze the entire train in.

The train stopped, everyone got off the train and filed into the transfer station.

Oncoming is a huge space, surrounded by doors. Some of the spaces behind these doors have been arranged by Ankai, but some are still idle.

"Most of them are warehouses. In the future, this will be the main production base for vehicles and weapons. These warehouses are used to store various materials, weapons and ammunition..."

An Kai introduced to everyone as he walked.

A group of people walked around on the first floor, and immediately went up to the second floor. The area of ​​the lobby on the second floor was about the same as that of the first floor, except that it was no longer circular, but square.

"This is a vehicle parts processing center. The production of vehicles is more complicated. It is not realistic to manufacture the whole vehicle or the whole machine directly. So I arranged here as a place for parts production. After the parts are produced, they are sent directly to the top floor. Assemble and become a brand new vehicle."

In fact, system manufacturing can be carried out separately from the beginning.

Take a car as an example, how many parts does a car have?

In fact, there is no exact standard answer to this question.

From the system, there are two modes.

One of them is the simple mode, which is the kind made by the whole vehicle. The system will directly mark the general components of the car, such as the compartment, chassis, suspension, power, interior, brake... etc., all with one It is composed of a large part, and how many parts there are in each part will not be displayed one by one. It only tells Ankai how much material is needed. He prepares the materials and the system controls the production line to produce automatically.

The other mode is the subdivision mode, which means that all parts can be displayed. If Ankai is a master of automobile manufacturing, or if he knows cars very well, he can even modify the model at the system level. Cars for personal DIY work, or special decoration and layout for the interior.

In the subdivision mode, a normal car is assembled from more than 10,000 independent parts that cannot be dismantled. The number of independent parts and components of some special cars with extremely complex structures is even as high as 20,000, which is extremely exaggerated.

Of course, the greater the number of parts of a car, it does not mean that the performance of the car is better, but it means that its reliability will be more difficult to guarantee. Fortunately, in terms of system manufacturing, Ankai has always been very assured that even a car with more parts can maintain its own stability at a fairly high level. But how to put it, the overall comparison will still not be biased, anyway, the more complex things, the greater the chance of error.

An Kai has probably seen the composition of a car in the subdivision mode, and nothing else, just an engine makes his scalp numb.

In the cooling system alone, there are generally multiple components such as a water tank, a water pump, a radiator, a fan, a thermostat, a water temperature gauge, and a water drain switch. In terms of lubrication, it consists of an oil pump, a filter, an oil filter, an oil passage, a pressure limiting valve, an oil gauge, a pressure sensing plug, and an oil dipstick.

In terms of fuel, gasoline tanks, gasoline gauges, gasoline pipes, gasoline filters, gasoline pumps, fuel injectors, air filters, intake and exhaust manifolds. In addition, the ignition power supply, ignition switch, ignition coil, spark plug, high-voltage line and so on. So many things together make up a car engine.

It is hard to imagine that there are so many small things in an engine that does not seem to be a big one.

This is just an engine.

Then take the car chassis and give a chestnut.

In terms of transmission, clutches, transmissions, universal joints, drive shafts and drive axles, etc.

In terms of driving, the frame, axle, suspension, and wheels are composed of parts. Its basic function is to support the quality of the entire car and ensure the driving of the car.

For steering, it is composed of steering wheel, steering gear, steering knuckle, steering knuckle arm, tie rod, straight tie rod, etc.

The braking aspect is relatively simple, just a braking system, but if it is subdivided, there are actually many small parts.

As for the body and electrical and electronic systems, there are also a lot of various parts, especially electrical and electronic systems. That is really, you can squeeze in dozens of small parts in a place where you can slap it.

If An Kai really understands this a little bit, then he should not do anything. Just memorizing these things will take a lot of time.

In fact, Ankai can always use a very simple model to manufacture vehicles, but this subdivision model must also exist, because no one can guarantee that there will be talents in this area in the future, if it can really get a modification. Da Na, the future can be expected. So although he still has to rely on the system to manufacture vehicles in a simple mode, the plan is necessary. In the future, many production lines will be established here to produce different small parts, which can be modified as soon as they can be modified... Of course, most of the current space Still idle.

Go upstairs again ~ www.novelhall.com~ The third floor above is the space for weapons production.

Here in the future, the production of sub-models will also be carried out. For firearms... the parts are much simpler than cars, but the room for modification is also very large. Even because the structure of the firearms is relatively simple, it is easier to modify.

Anyway, An Kai does not have this ability. Most of his "knowledge" nowadays is directly given by the system, and he has not studied and researched himself. He is expected to reform directly, unless he uses the power of the system. , Otherwise it is unrealistic. And to directly use the power of the system is to use a simple model for manufacturing. But things like firearms are always modified according to the user's feedback and needs. Just think about it in your head. In fact, it really doesn't make much sense except for wasting some materials.

So in the future, many production lines will be built here, but now, it is as empty as the second floor. Even the production line of the shelter has not been transferred. This is not a small project.

Further up, it is the living area, there is nothing to say about this.

Continuing up is the assembly and parking area, and this is also the highest level of the transfer station. The access passages and gates will be placed in this place.

An Kai gave orders to Master and Kent respectively. When the two and their team members began to familiarize themselves with the environment and spatial layout, An Kai came to the planned entrance and exit of the passage, raised her head, began to select a model, and prepared to manufacture door.

Please remember the domain name of the book’s first publication:. The fastest mobile version update URL: