Chapter 12： Abolished their research

"This is impossible! It is impossible!" In a Japanese testing agency, a middle-aged man in a suit and a screaming screams.

In front of him, there is a detailed inspection report, and on the front table, the delicate blade is placed. The shimmering light on the blade is like laughing at him.

"How can Chinese people have such high-precision CNC machine tools?" The middle-aged people are still roaring, and several people around them are silent, looking down at the same test report in their hands.

The detailed test report clearly stated that the processing of the blade was in full compliance with their design expectations. Even if they were afraid of being seen, only one wire precision was required, but the workpiece processed by the other side reached a machining accuracy of less than 0.5 wire.

This shows what? It can only be said that China has at least 5 micron high-precision four-axis machining centers, and even five axes. It may be just a sample in the laboratory, but it has already achieved this precision.

Only this possibility can explain why Shuimu University's laboratory can process the finished product together with input parameters in just one day and one night. We must know that this time, we have not given samples. It is entirely for Huaxia to produce its own materials. It is unlikely to be finished by semi-finished products that have been processed.

By hand polished? one day one Night? That is absolutely impossible, only digital processing is possible.

“Is it a product from other countries? Germany, the United States, the United Kingdom, is it machined from other countries’ machine tools?” Among the people who read the report, a man with a slightly white hair asked very calmly.

“We have investigated the list of purchased products from Shuimu University, and there is no high-precision CNC.” A young man next to him immediately replied with respect.

"What about the secret introduction?" asked the white-haired man.

"We also privately passed the competitors of Europe and America. In the position of blocking China, everyone is the same, and no secret has sold any processing center." Still the young man answered quickly.

"What about Professor Wang's information?" The white-haired man asked another question.

This time, I changed to another suit. The middle-aged man quickly distributed the information: "The Shuimu University Fine Arts Department has been conducting research in this area for many years. Professor Wang Anfu is one of the academic leaders. In addition, the fine instrument system. Cims (CNC machines) has always been a support professional for them."

“That is to say, from the perspective of the Shuimu University laboratory, they have the possibility of researching a 5 micron machining center?” The white-haired man looked at the information and asked the crowd.

Several people present did not speak. After a while, someone nodded hard. Later, the remaining few people began to nod one by one, even the middle-aged man who did not believe this at the end, and finally nodded.

From the possibility analysis, it is indeed possible. And this is not the first time, but the second time. The first finishing of the crankshaft, the second turbine blade, may be seen as accidental, and it is no accident that the high-precision workpiece can be made in the shortest time in the same place twice.

"So, if there is such a high-precision machining center, what performance might it have?" asked the white-haired man.

"From the current situation, it has a processing precision of at least 5 microns. Although it has not yet reached the accuracy of our best machining center, it is slowly catching up." A middle-aged man with glasses stands up on the side. Analysis: "But their control system should have a gap."

"Please refer to the two processes we have learned." The glasses man did not wait to ask questions, and the next analysis was: "There are the same steps twice, it takes a day to enter the parameters. Of course, we have not Directly related to their digital drawings, but there is a high probability that their data is not compatible with our control data."

"There is a greater possibility that their control system is not perfect enough." The middle-aged people who started the first time admitted that China may have high-precision numerical control, and they no longer insist on what may not be possible, but actively participate. Discussion: "Otherwise they will not delay the launch of the finished product."

"I have a situation here." The young person in charge of the information of Professor Wang added: "From the insiders of China who we bought, I learned that Professor Wang submitted a paper in the first two months, titled "High Precision." The design of the machine tool control system is said to be a staged result of the laboratory. I believe it can give you a reference."

At this time, even if it is a stubborn person, it will not have any objection to the immature high-precision CNC that has been built in the Shuimu University laboratory.

"So, the next issue." The white-haired man calmly announced the next question: "How should we respond?"

"To kill their further development." Glasses men are also very calm and open.

When the words came out, everyone was nodding.

This is basically the consensus of all the countries that have blocked China in the past few years against China. If China does not have it, then it will be blocked and cannot be strictly blocked. Then it will be sold at a high price and gain high profits. Once China has it, it will cut prices substantially, completely squeezing the local industry in China, and making China unable to develop. It can only become a certain or a few academic papers, and it has no practical value at all.

"Then open the 5 micron four-axis machining center to them first." The white-haired man concluded: "Depending on the situation, we will first discuss it, when they spend a lot of money to build a factory to start selling products, slam, or From the very beginning, their research has become an outdated waste. Can only be an academic paper?"

"To fight hard, the attack is thorough." The middle-aged man is very angry. Huaxia dares to develop high-precision CNC in private: "From the root, a data compatibility problem makes their control system worthless."

There is no objection to this. In fact, the opening restrictions can also greatly increase the profits of all parties, which is a good thing for everyone. There is a product that does not allow the sale to seal the development of the other party, but it does not benefit itself. It can only monopolize a part of high-end processing. For capitalists, this is not a good deal.

Release the 5 micron precision CNC, the highest-end processing is still monopolized in their own hands, but they can be widely distributed, and everyone has seen the rolling bills recover in front of them.

"European and American allies should not notify us for the time being, wait until we make a profit first and then submit the evidence to them." The old man of the white hair finally decided to handle all the treatments.