Chapter 41： Work on

Shi Xinwage’s stalk was an appointment made by Zhao Wei and Guo Tailai last time. I didn’t expect Guo Tailai to remember it firmly. Zhao Wei also laughed again: “Well, I am waiting for your girlfriend’s day.”

Seeing that Zhao Wei once again showed the same smile as in the school, Guo Tailai was also happy for a while. When she saw Zhao Wei in the afternoon, she didn't have the bright smile in the school. She didn't know how much wronged she was at work.

But it shouldn't be, Zhao Wei's family is so good, who dares to wear her shoes? Guo Tailai shook his head, how could it be? Estimated to be a design problem, Zhao Wei is a bit too good to win too much, it will be uncomfortable.

Guo Tailai’s explanation, Zhao Wei is completely acceptable. As the saying goes, Guo Tailai is a big man who is a big man. He also does heavy physical activity and exercise every day.

It is precisely because of this that Zhao Xin looked at Guo Tailai and moved the raw materials that needed to be moved to the trolley, and then pushed all the way to the workshop.

Some things are easy to do and can be done with a fine car. There is the latest 5 micron machine tool, Guo Tailai has chosen a mechanical lathe, he has not fully mastered the use of these new CNC, or the mechanical lathe is the easiest to get started.

As for the accuracy, Guo Tailai can completely finish the car first and leave a small amount of allowance and then manually polish it. Anyway, Guo Tailai now manually processed to 0.5 micron accuracy, which is more than enough for Zhao Wei's design requirements. After all, not every component needs to be the limit.

Zhao Wei is also suffering from the loss of the operation of these machines, lack of hands-on ability, so I have to find Guo Tailai.

Now that it is not mass production, Guo Tailai will not make any production process, and every part can be made with the fastest speed. Guo Tailai first practiced with the simplest parts and was also familiar with the performance of the machine.

Today, I plan to make more than a dozen parts, make semi-finished products on the lathe, and then directly put on the bench. Some of the punching activities, Guo Tailai did not use the lathe, but intended to use the hand-held drill bit to open the eye, so that the hole, because Guo Tailai can flexibly change the hand-held direction, eliminating the need for various mounting fixtures, than using a drill bit on a lathe Punching is more efficient.

Of course, only Guo Tailai can do this. His hands are stable enough to match the machine.

During the period, Guo Tailai’s lungs were itchy and he spit a few black sputum in the bathroom. Because Guo Tailai wants to process, so a large number of nano-robot controls have been mobilized. The number of nano-robots used to remove particulate matter from the lungs has been reduced to only 100,000, which is much slower.

After getting the nano robot from the Famen Temple to upgrade the system, there are two new functions, one is to improve the stability of muscle control, and the other is to improve the speed of muscle control.

To improve the stability of muscle control, Guo Tailai found the clue without using hands-on grinding. The hand is more stable, the manual adjustment of the mechanical lathe is easy to set, with the measurement accuracy of Guo Tailai's binocular metamorphosis, although the lathe is purely mechanical, I am afraid that only 5 wire precision, but Guo Tailai's stable hand controls the infeed, which can be accurate To the inside of the silk. Switched to hand-grinding, the accuracy is probably higher than 0.5 microns.

Another speed to improve muscle control behavior was discovered after using the fitter tool. In general, compared to the speed of the original Guo Tailai hands-on, it has doubled directly. Suddenly, even Guo Tielai was shocked by himself, let alone Zhao Wei.

"Fat, don't be so desperate!" Zhao Wei thought that Guo Tailai felt that time was tight, so he took the initiative to speed up and hurriedly said: "The big engine that is improved will be done next time."

"Nothing, I have a measure." Guo Tailai found that this is the benefit of the system upgrade, and immediately do not worry.

The nano-robot controls muscle movement and repairs the torn muscle fibers at any time, so don't look at the fat body is still very fat, but the muscles are not bad at all. In fact, even if Guo Tailai does not use nano-robots to consume fat, the amount of exercise per month is enough to lose weight normally. That is to say, Guo Tailai does not want to let his weight drop too fast. In the past few months, Guo Tailai’s weight loss has been maintained at a rate of ten pounds per month.

Once again, I saw the joy of Zhao Wei, let the fat man still care about it, and then continue to lose weight? How much damage can you bring to your body? Is it possible to repair cells? What damage is the time to fix it. Does rapid exercise accumulate lactic acid and cause muscle soreness? Nano-robots can get a big part, and rest for a day during the day, there is no problem at all.

Looking at Guo Tailai's enthusiasm, and there is no particularly painstaking expression, Zhao Wei will not say anything more, just staring at the side, waiting for Guo Tailai to finish one, then help to measure.

In fact, in machining, an important factor affecting the processing speed is measurement. Rough processing is fine, you can measure it after a knife, anyway, the amount is enough. But when it comes to finishing, if necessary, it will really be a measurement of one action, so as not to make mistakes, it is really a measurement time longer than the processing time.

In Guo Tailai's body, there is no such thing as delaying the processing due to measurement. Guo Tailai's fine parts are all in one go.

Don't look at Guo Tailai is a dead fat man, but he is a flexible fat man. Especially when he is processing parts, the movements in his hands are continuous, but they are exactly like laser ranging. In addition, the confident light that comes out of the eyes makes Zhao Wei, who has been watching from the side, can’t help but be The fat man who works hard is attracted.

Unconsciously, Zhao Wei fell asleep in Guo Tailai's regular processing voice, even she did not know how she fell asleep.

"Hey? How do I fall asleep?" When she woke up, it was already seven o'clock in the morning, and Zhao couldn't help but be surprised.

At the institute, Zhao Wei has not slept well in recent times, and a little bit of sound will be awakened. But today the fat man is processing the parts not far away. Although there is no driving lathe, but the steel boring bit is connected with the sound, it is really strange that he can sleep so incense.

Maybe it’s because I know that the fat man is not far away, and my heart will feel unconsciously! Zhao Wei sat up on the bench and found that his body was still covered with a big coat. This size, no need to ask, must be fat. ..

When I looked at Guo Tailai, Zhao Yucai discovered that Guo Tailai had already packed everything up, and even the processed debris was cleaned, as if it was exactly the same last night.

If you don’t look at Guo Tailai’s busy half-stay here, Zhao Wei doesn’t believe that someone has ever moved. Or look at the meter to make sure that the lathe is turned on!