Chapter 336： Breaking news (on)

Domestic sniper rifle, no matter which model, as long as the distance is over 300 meters, basically the ballistic spread will suddenly increase. If you want to maintain a certain precision if you exceed 500 meters, you have to consider Guo Tailai’s last super Heavy barrels, but also have to use special bullets.

Now, on the 800 meters, the deviation of the domestically produced NATO system bullets is no more than 30 centimeters. This is already a good shot. You can use the high-precision bullets made by Guo Tailai. Ten rounds of bullets can be hit in a circle with a radius of fourteen centimeters. It is conceivable that the accuracy of this gun is excellent.

This is still the first time to use, we still use the experience of l115a1, if you wait for a few thousand bullets, master the characteristics of the gun, then which is not at that distance?

Eight hundred meters! How many of the domestic snipers can deviate by fourteen centimeters on the 800 meters? This deviation is enough for the gun to hit the target. when

When the target was pulled far again to one kilometer, the domestic bullet deviation had exceeded 2 moa and the deviation radius exceeded 60 cm. However, the imported bullets still can produce an accuracy of 1.2moa. As for the bullets made by Guo Tailai, the accuracy of 0.75moa is still maintained, and the deviation radius is still 22 centimeters. in

The field is all professionals, the kind of one-know how to play can only exist in the movie, it can be said that within one kilometer, this gun is the best sniper rifle. What's more, the effective range is still 1,600 meters?

I didn’t continue to shoot at a target farther away. The one who was able to hit the target in the previous one-meter distance was already a top-notch shooter who was able to take a chance to play with luck. Now the worst of the six people can also be in the gun. The three-four guns on the inside have fully demonstrated the excellence of this sniper rifle.

Even more surprising is that the gun is so accurate, but the weight is only 6.5 kilograms, slightly heavier than a bullet-filled assault rifle, but lighter than a large-caliber sniper rifle like Barrett. Too much. Easy to carry, the range is so high enough to change the battlefield situation at some point.

Today is only the first test. In fact, the accuracy of this test is not standard. The real test should be to fix the guns for 30 rounds of shots with each gun in the cold gun state. This is the standard. In addition, the use of various environments, as well as the firearms, especially the life of the barrel, is also an important indicator. These detailed tests are not completed in a day or two. can

Even today's not-so-standard test has surprised all the people I saw. Do not

However, today's test also reveals some problems and gaps in China's military system. by

With regard to the lack of precision shooting awareness and the limitations of economy, resources and industrial capabilities, China's firearms and ammunition has long been more concerned with the savings in material and process costs and the improvement of power. The finished products only need to be able to reliably meet the requirements. From the 79-type sniper rifle that mimics the Soviet svd rifle to the later 88-type sniper rifle, there are no high-precision bullets, which are typical examples.

The gap in the process has caused domestic bullets to perform the worst among the three bullets. In the post-assembly process of the traditional bullet production line, the steel core and the lead pad are loaded forward from the tail of the bullet shell, punched into place by a tool such as a punch, and the tail is closed. This process will have a certain damage to the consistency of the warhead, which will affect the positioning accuracy and the bullet pointing in the early shot of the shell. Insufficient positioning accuracy will make the fit of the bullet and the gun not tight, firm and consistent; causing a large difference in the initial orientation of each warhead and destroying the consistency of the ballistics. I

The production of the national shell is only based on the external dimensions, and the acceptance criteria of the mass distribution (thickness everywhere) is also a huge gap. Faced with the precision of ammunition molds equivalent to the accuracy of China's measuring tools and the strict and rigorous acceptance criteria, there are still many years of debts in process and quality control, not to mention the huge defects in the design and materials.

It is also made in China. The shells and warheads hand-built by Guo Tailai are not better than the imported ammunition, but they are even more excellent. This is already a problem. Take

There was no good before, and I could only use the existing things to support it. Now I saw the design samples taken by Guo Tailai. I saw the bullets produced by Guo Tailai, and the leaders of the military region could not sit still. Just as Zhao Xiangbei of the Eastern Group was at the scene, he said nothing but immediately took Zhao Xiangbei to talk.

The central idea is very clear, no matter what other military regions think, the Beijing Military Region will be the best. There was no way to do it before. Now that it is there, it goes without saying that it must be the best. How to produce Zhao Xiangbei himself decides that even if the cost will increase a lot, the military will recognize it. This is a high-precision sniper rifle, and it is not a man's assault rifle. It is only a small amount of equipment. The cost is high and the cost is high! Is it more acceptable to take the foreign sniper rifle than the special warrior who gave up the mission? Zhao

In fact, I have long wanted to change some of my ideas. As early as when he was in charge of the Southern Group, he was constantly trying to improve the quality improvement process. Where would he disagree? Just to force Guo Tailai, he will also agree, not to mention his heart also wants to improve the craft and quality of the military system, the two sides hit it off.

Guo Tailai's sniper rifle is actually a good opportunity. High-precision sniper rifle, high cost and high price is normal, who does not know a penny? The problem was not so good before, the military was reluctant to pick up the money? Now that the military can accept high costs, what is Zhao Xiangbei still hesitating? Guo

Tailai handed over the sample gun and the design drawings, and took the teacher to go back to rest. There are still two or three days together. Guo Tailai doesn't want to waste time on the military or Zhao Xiangbei. There is a big thing after the New Year's Day holiday. Guo Tailai will not leave the teacher to leave. .

Zhao Xiangbei is of course no problem. The Beijing Military Region also has to carry out more tests on the sniper rifle with Zhao Xiangbei. It will be no problem for Guo Tailai for a few days. In addition, most of their energy and time now have to deal with people in other military regions, and they simply cannot take care of Guo Tailai. each

There is no vegetarian food in the military region. Guo Tailai has good things here, or a high-precision sniper rifle. Can this news be sealed at the level of the head of the military region? The phone on the assembly side has not stopped. All the leaders of the major military regions have personally asked this question. total

The head of the dress also has a headache. Anyway, it is the leader of the military region. Yes, there are so many guns in any case. Except for the two versions of the all-titanium alloy, you should fight for it yourself!