Chapter 559： Play a few advanced projects (below)

Guo Tailai studied this metal because it is bulletproof.

The performance of this transparent metal far exceeds the bulletproof glass, which only allows the glass and plastic to reach a thickness of 5 inches slowing the passage of the bullet.

If it is replaced by this kind of transparent metal, the weight can be reduced by at least 20%, the thickness is also the same, the protection is increased several times, and there is no way to see the outside scene through the bulletproof glass. situation.

Of course, in addition to being considered as bulletproof glass, Guo Tailai is mainly for the submarine that can dive into the Mariana Trench.

Only this kind of extremely high-strength material can withstand the terrible pressure of more than 10,000 meters of atmospheric pressure in the deep sea.

The fourth is still an alloy material, this time is an ultra-high strength aluminum alloy.

The tensile strength of ordinary aluminum alloy is 80-100 MPa. After ten years, the highest strength of 7090 aluminum alloy in North America is 855 MPa, the strength of European aluminum alloy is 840 MPa, and Japan ranks at the top 900 MPa, but Guo Tailai wants to study The 7y69 aluminum alloy has a maximum tensile strength of MPa and a maximum yield strength of MPa! This kind of extremely high-strength material, special production process makes the production comprehensive cost is low, and has high corrosion resistance. It has good anti-corrosion effect on high salt, high acid and high alkali. It is simply a dream material.

7y69 aluminum alloy has high corrosion resistance, especially for seawater.

Future related test results show that the products made from it are still bright and new after being immersed in various marine water quality environments for three years. There is no parasitic phenomenon of marine organisms, and there is no pollution to the environment and it is harmless to the human body. It is simply used as The best choice for high performance marine building materials.

The superior strength can be directly used in the aircraft manufacturing industry. The low density and high strength can greatly reduce the weight of the aircraft and improve the performance of the aircraft.

In addition, it can also be used to manufacture armored bulletproof materials, track shoes, shells and many other weapons and equipment.

Therefore, it can be foreseen that once the research is successful, the popularization of ultra-high-strength aluminum alloy will push the entire Chinese metal manufacturing industry to break through the tradition and enter the forefront of the world.

In addition, this ultra-high-strength aluminum alloy has completely solved the material problem for the manufacture of oil and gas pipelines and ultra-high pressure vessels, and has enabled China to leap into the world's leading position in the field of ultra-high pressure vessel manufacturing.

More than that, the products made with it can also be widely used in aerospace navigation, weapons industry, oil pipeline transportation, urban water distribution network, electronic information engineering, modern architecture, transportation bridges, medical equipment, auto parts, engineering machinery, etc. Sophisticated field.

In particular, the material has a melting point of only 780 degrees Celsius, making it ideal for 3D printing materials.

Speaking of 3D printed materials, it is no accident that another large project of Guo Tailai is 3D printing.

The concept of 3d printing does not need to be introduced. Anyway, as long as it can be successfully developed before the European and American countries, China will be the only one in the future.

As long as we focus on the research and development of various professional materials for this project, we will be able to become a “great” company by holding various 3D printing technologies to open factories and sell equipment.

The main big projects, as well as the research projects that have to last for a long time, are basically these. Others are some of the small projects that Guo Tailai occasionally thinks may be cut at any time. It is not worth mentioning.

In short, once these projects are established, for a few years or even ten years, the short ones will be at least one year.

Even in order to be able to develop these projects successfully, the project team must develop enough excellent equipment and instruments in the middle to complete Guo Tailai's requirements.

Guo Tailai also considered this very thoughtfully, and some of the classification sub-projects were also mentioned. Basically, as long as the step-by-step according to Guo Tailai's research and development route, the possibility of completing in the initial set time is over 90%.

Of course, the investment in research and development of basic materials has been extremely huge. In the past few projects, even if the Justice Square did not think about how to make money, the aircraft carrier blocked the project and sold more than hundreds of millions of dollars.

In short, just this batch of projects, the company's annual investment may not be less than billions of yuan, or even higher.

If there is no research and development direction of Guo Tailai, I am afraid that it is really necessary to study these materials out of thin air. The money spent can be described by astronomical figures.

However, high investment also brings high output.

Once the development is successful, the production technology of these materials alone is enough for any country to exchange tens of billions of dollars.

This is the result of the upgrade and technological leadership of the entire processing industry behind it.

When Mi Feifei saw the list and description of these items, his face was directly white.

In addition to the car's project, several other items are directly labeled with the company's highest level of confidentiality.

The project information that Guo Tailai took out was directly locked into the safe of the company's highest protection level, which only slightly eased.

Although Mi Feifei does not understand technology and only manages it, in the past few years, the company’s research and development projects have not been clear in terms of technical principles, but in order to sell these technologies, the application prospects of these technologies and the current fields of application What is the status quo inside, Mi Feifei has been studied.

Most of these are concentrated in manufacturing and some aerospace and other high-tech industries.

Just looking at these target parameters, even the technical blindness of Mi Feifei can know how exciting it would be if these projects were successful. After locking the materials for a long time, Mi Feifei is completely self-contained. The excitement calmed down.

The boss does not come to the company. Once the company is not going to play the share award to make it happy, it is to throw out a few big projects to make him almost out of order, and later have to talk to the boss, can not play so big.

This young heart of my own, I am afraid that sometimes it is not as tough as I imagined. Once I have tossed out a good one... Well, it seems that the boss can get something out of the boss, who can make the boss’s care method so powerful?

However, these projects, the more Feifei flying, the more they feel the need to strengthen the company's security.

It seems that it is necessary to summon the general manager of the security company, Mr. Huang, and Liu Zong, to discuss the future strengthening of the security level of the headquarters building.

Although the military has already participated in it, if it is really unable to meet the needs, it is estimated that the military must be helped.