Chapter 853： Sharp horns (bottom)

In the evening, General Sun paid out of pocket to entertain Guo Tailai, Zhao Yanyan and the other two generals. They were not extravagant, and they were in the small room in the canteen of the military region. A large table with small stir-fry, and a strong large bowl of hand-rolled noodles, everyone ate very happy.

I drank a little beer in the middle. Although everyone in the army was drinking freely, none of these generals dared to drink with Guo Tai. As for Zhao Yanyan, she didn't get drunk, and she drove.

Everyone went away after eating. The sister drove a Hummer and returned home with Guo Tai. The three generals did not leave the military area directly. They were in the military area and each made a telephone report to their leaders.

That night, several of the fiercest guys who called for something had received notifications from their respective superiors. Two things. First, I reiterated that Mr. T.'s rifling optimization of Cheyenne's tactics was reported to the organization and allowed. Second, write a deep inspection. If the inspection is not deep enough to fully recognize their mistakes, they can be suspended first and have a long enough time for them to recognize their problems and mistakes until the organization is satisfied.

A certain retired comrade also has the same retired comrade who called on the phone tomorrow to talk to him. In short, it is necessary to resolve some misunderstandings.

The sister enjoyed a whole night. From tomorrow on, she will have to take care of the project team of two helicopters at the same time and attend the assembly meeting. She will definitely be busy. Of course, after squeezing Guo Tailai one night, the sister also generously gave Guo Tailai out, letting him pay attention to the justice square technology and design company before the Spring Festival.

"Fat, can the chip manufacturing process be smaller in a short period of time?" Before going to work in the morning, Zhao Yanyan looked at Guo Mirror and asked Guo Tai casually.

"Yes!" Guo Tailai replied without hesitation. "But the technical principles may be different. This technology is already at its limit and requires some other method. It depends on whether our researchers can come up with more Good design, if you can think of it, it is now 45 nanometers, lower 28 nanometers, 14 nanometers, 7 nanometers, these are not impossible. The investment of talents and funds in this area must be strengthened a lot! I alone, even if It ’s a year without rest, and all of them are used for production, which is at most a few units.

"Bat!" After listening, Zhao Yanyan walked over and kissed Guo Tailai's face heavily: "I know, in fact, we all know that you have done a lot of preparations. Including the processing equipment for manufacturing these precision instruments. You rest assured Do what you like to do, you have made a way for us, and the rest is left to the country and to us! "

If Guo Tailai is just a skilled manual fitter, then maybe Guo Tailai's place of use is either a high-precision machine tool factory to make absolute flat workers, or a part of the high-precision production line of some aerospace units. Unfortunately, Guo Tailai is not. He has strong academic and design abilities and has solved many problems in the industry.

Guo Tailai's role model is very effective, and the country has also begun to actively attach importance to and train engineers with high academic knowledge and practical ability. In the past, although everyone understood that knowledge is power and technology is productivity, in most units, some working workers must have the lowest status and can be replaced at any time, as if they were born lower than management. . Now this situation has greatly improved in some key units, and the training of senior industrial workers has become a task that many units attach great importance to.

Because of Guo Tai's arrival, many things have changed. For example, in the future, the machine tool manufacturing industry that Germany, the United States and Japan dominate, has now become the top four in Germany, the United States, Japan, and China. Former foreign high-precision machine tool manufacturers cobbled by cowhide, where still has that kind of lofty spirit? Originally, placing orders at high prices had to wait in line to see if others were happy or unwilling. Now it has long become an initiative to promote sales, participate in various trade fairs, and actively contact customers. I hope that an after-sales staff can be resident for after-sales service.

This was not the case in the past. The after-sales of big-name machine tools is more and more, and if there is a problem, you want to maintain it. The whole process is responsible for the ultra-high standard travel costs of the after-sales personnel. Even if one screw is wrong, the original parts must be imported. The price is dozens or hundreds of times more expensive. A square piece of thin iron piece dare to charge you tens of thousands of dollars. Domestic spare parts of the same type? Does it work? can! But if you use it, you will not be responsible for after-sale. What now? I can't wait to open a 4S shop in China.

For extremely high-precision processing, there are LODTM in China. In the past few years, Guo Tailai has made several machines. Other engineers have assembled more than ten machines with these machined parts. Four of them have been assembled on par with Guo Tailai's. The accuracy of the other units is worse, but it is also second to none in domestic and international, which is enough to deal with some ordinary processing. It is believed that with the further improvement of the level and proficiency of engineers, more and more LODTM will be produced faster and faster for domestic use.

In addition, in terms of 3D printing, due to Guo Tailai's large investment in research in China, he has also taken the lead in the world.

At present, there are several types of 3D printers that can be commercialized in Zhengfang Technology, including 3D printing of three polymer materials and 3D printing of three metal materials. One is high-performance aluminum, which is also a material developed by Zhengfang Technology. One type of titanium alloy powder is laser melted, and the other type is high-alloy 3D printing. In addition, some large 3D printers for concrete and rapid-shaping foam are entry-level. In addition to their large size, they are basically very ordinary, far less accurate than the printing of several metals and polymer materials.

"Yo! Boss, are you willing to come to the company?" When Guo Tai came to get up to clean up and rushed to the company, as soon as he entered the office and sat down, Mi Feifei heard the news and rushed to the office. Lin Jiayi was away, Mi Feifei released himself very much, anyway There were only two of them in the office, and they opened their mouths and said, "This is a ring for others, don't you often come and see?"

Guo Tailai is also speechless. If he can, he will have to make a smiley face. Mi Feifei is good at everything, and his appearance and ability are top-notch, but his temper whistling in front of acquaintances is very helpless. However, Guo Tailai was also a bit guilty. I didn't know why, as if I felt like I had delayed Mi Feifei, so I let her go wild.

"Give me a cup of coffee!" Guo Tailai also asked politely to Fei Fei.

After a while, Mi Feifei's coffee was brought to Guo Tailai. Guo Tai took a sip and it tasted so good that he couldn't help but give a thumbs up. Putting down the coffee Guo Tailai asked: "What's happened to the company recently?"

"Zhengyifang Science and Technology is step by step, there are no big surprises!" Mi Feifei originally wanted to report, but thought that the boss could see the project report and not necessarily know a little, so I came directly, but soon became a little expectant: "Yesterday the project leader of the design company told me that the super cruise ship plan has been designed. Would you like to see it together?"