Chapter 167： Hot melt method

Chapter 167 Hot Melt Method

The Pamiji Plateau is located in the southwestern part of the Yongye Kingdom and is a bilateral area that communicates with the Kingdom of Guman. Because the average altitude is above 3,500 meters, there are very few people coming and going. In addition to some native tribes, the Pamiji Plateau is the undisputed human exclusion zone.

But this day, in the blue sky, like a bleaching sky, passing a huge black shadow shining with radiance.

It is a strange thing, not a living thing or a dead thing. Its overall construction is a flat and large transparent crystal. There are white silk threads in the crystals, which look like ice.... No, it should be said to be ice.

Because a plateau eagle flew over it from a hundred meters away, it fell directly into an ice sculpture and fell.

If it is ice, it must be a dead object. But why is it misunderstood as a living thing? It lies in the huge ice of about 20 meters in length, with the same transparent wide wings on both sides, and the style of the wings is similar to that of the swan. Every time I move my wings, there are crystal ice feathers falling down.

The sun on the plateau is fierce, shining through this long, winged ice.

Above the ice, several mysterious people in white robes are closing their eyes. The endless ice power of the ice does not seem to cause harm to them. Instead, in the white air, their figures are more and more ethereal.

If you look closely, you will find that behind the white robes, all embroidered a frozen moon.

......

On the early days of the flowering month, Anger experienced a half-month of wilting. On this day, the consequences of the anti-phagectomy were finally lifted.

He almost immediately plunged into practice.

He took the lead in learning the basic techniques of the lithology, the hot melt method and the condensation method. In his plan, he wants to climb the top of the sky tower with two prerequisites, one of which is alchemy weapons; the other is a set of defensive techniques.

In these two prerequisites, learning sets should not be a problem, but it takes a while to be proficient in application. However, the production of alchemy weapons, Anger is somewhat uncertain, after all, is the product of the combination of two civilizations, the future is uncertain.

The most important thing is that Angel doesn't know at all whether he can cross the threshold of the alchemy world. If even alchemy apprentices can't, then all other plans are empty dreams.

Therefore, in the first time, Anger put all his attention on the hot melt method.

The hot melt method is the first threshold for alchemy apprentices.

The essence of the hot melt method is actually the long-term resistance between the fire element and the magic power, which produces extremely high heat. Then control the high heat range through the trick model and prevent it from hurting yourself.

This kind of trick is just the opposite of the tricks of the three architectures. The trick model is not to build a hot melt method, but to limit the heat of the hot melt method.

Anger took out a piece of paper, which was written on a piece of paper, all of which were data and formulas. This is the result of the model that was derived from the hot melt method when he reversed the technique a few days ago.

After remembering several key coordinate points of the model diagram, Angel closed his eyes and entered the state of meditation.

The space of thought has been restored to the clear, the "lollipop" he built is in the chaos, the singularity is slowly rotating, purifying the original magic.

Instead of managing the singularity, Anger released the pure magic from the magic source and built a trick model of the hot melt method.

With the positioning of the Vientiane axis, the trick model was built in almost two or three seconds.

After the trick model of the hot-melt method was constructed, there was no abnormality. It was suspended in the space of thought. There was no collapse or disintegration, and there was no impulse to release it.

Angel has turned the trick model to the fingertips, still has no feelings, and no extraordinary traces.

"This model is really different. Even if it is suspended in the body for a long time, it will not collapse. It is as strong as a stone." Angel said.

Since the model does not see a problem, Angel has simply started to "preheat."

The combination of fire elements and magical power, a simple explanation, is to release the magic power out of the body, and friction with the outside fire elements.

This step is not difficult, and the magic output to the outside world is also very small, but the patience and control he needs is difficult for ordinary wizard apprentices.

The so-called patience is the continuous output of magic, slowly warming up. The time required for this process is determined by the amount of fire element in the air. In places where the fire element is active, the warm-up time is about a few minutes, but where the fire element is lazy, it may take a few hours to warm up, perhaps more.

Basically, this step of patience is hard to beat the apprentice of the wizard.

But the next step of control is the hardest part of learning the hot melt method, and it is one of the reasons why alchemy has turned most of the wizard apprentices out.

In the process of preheating, the magic must always be output from the body to the outside of the body. Although the magic consumes very little, it must be continuously released with the same measure of magic.

A little more, a little less, even a trace of silk, will lead to preheating failure.

With precise control measures, it is almost impossible for wizard apprentices to do this.

......

Angel also began to preheat this step, the magic of continuous output from the body to the outside of the body, just beginning to contact the fire element, resistance is easy.

But after 2 seconds, the warm-up failed. The reason is the same as other wizard apprentices, the measure of magic is not controlled accurately.

In the second test, Angel spoiled the magic out a little bit. Under his high concentration of attention, he continued for 3 seconds.

Anger conducted the third and fourth...the tenth test, the highest record is to maintain the magic power for 4 seconds. The other basics are 2 seconds.

In places where fire elements are active, this warm-up takes more than two minutes. But he can't break through even 5 seconds.

Anger suddenly had some frustration. Didn't he learn the talent of alchemy?

The magic is almost consumed at this time, and Angel's mood is also poor. Simply close his eyes and reply to the magic through meditation.

A blink of an eye, five hours passed.

In the process of meditation, Anger’s mood gradually calmed down.

He also wants to understand that it is normal to be hit, and nothing can happen overnight. He will continue to try, if there is really no way to close the measure of magic, then he can only say that he has no connection with alchemy.

At this point, the magic power in the magic source has reached ample, and Angel took out the dry food, while thinking about how to control the measurement of magic.

Control metrics are definitely not done with care, and Angle has previously put almost all of his attention on control and it is difficult to achieve perfect control.

Angels said: Manpower is always exhausted, can you borrow external forces?

When it comes to external forces, the easiest way to control the measurement is through the pipeline limit. Just like drinking water with a straw, the straw can effectively limit the water outflow measurement.

But he can't put a pipe into the thinking space. Besides, can the magic be loaded into the tube?

Pipeline...limit...

Anger repeatedly recited, and various pictures flashed in his mind. Suddenly, a picture full of dotted lines flashed through my mind.

"I thought of it! I can't insert a pipe, but I can make a pipe myself!" Angel's face flashed with excitement: "You can do it with the Vientiane axis!"

The Vientiane axis is the performance of the 36-bit spatial coordinate system positioning method.

The Vientiane axis transforms the thinking space into a collection of innumerable dashed lines, each of which can be azimuth into a spatial coordinate point. Anger only needs to construct a stereo channel in the thinking space. With the Vientiane axis as the measurement standard, the measurement of the magic output can not be controlled!

Anger thought of this and immediately began to experiment with excitement.

It took a little half a day, a passage defined by the Vientiane axis, starting from the source of the magic.

Anger took a deep breath and began to extract magic from the source of the magic. He carefully watched the magical force from spilling over the Vientiane axis.

2 seconds, 3 seconds, ... 19 seconds, 20 seconds.

After 20 seconds, the warm-up failed again.

However, Angel did not show a frustrated expression this time, because he was quite sure that he solved the problem of measurement! From 4 seconds to 20 seconds is evidence!

The reason why he failed this time is not that the measurement is not controlled, but that the rate fluctuates.

As long as the problem of measurement is solved, other problems are minor problems.

It took another period of time, and the rate problem was able to reach a basic balance as he always noticed.

With both the measurement and the rate resolved, Anger once again warmed up.

2 seconds, 3 seconds, ... 19 seconds, 20 seconds... 1 minute 10 seconds... 1 minute 30 seconds...

In 2 minutes, Angel failed again.

But this time the failure has nothing to do with technology, but... his fingers are hot.

He has been paying attention to solving the preheating problem, but he has forgotten one thing. The position of warming up must be within the juggling model. Otherwise, being burned is only a matter of time.

......

The third day of the second month of the flowering month.

Anger moved the stove in the kitchen to the basement.

Ignite the fire.

The hot heat wave spread slowly in the basement.

Anger sat on the edge of the fire, closed his eyes and began to meditate. After about half an hour, Anger extended his spiritual strength and felt the activity of the fire element in the air.

——With the stove as the center, the activity of the fire element is several times higher than before.

Anger felt almost the same, stood up and came to the front of the wooden box on the other side of the basement, which contained the non-advanced materials purchased from the Promethines.

From the wooden box, Anger took out a blackish reddish metal block.

This is the devil blood copper, the most one of the materials he purchased. It is the most low-grade one in the blood copper series, and it is contaminated with the demon blood and contains copper mines for many years.

The items made of earth magic copper will greatly improve the hardness and wear resistance, and have a small chance to obtain special effects.

Anger took out the demon blood copper and returned to the fire.

Anger used the hot-melt method to construct a trick model, and then output the magic slowly to match the fire element, time by bit.

After fifteen minutes, the hot melt method is formed!

Anger can feel the intense heat in the model of the fingertips. However, it was tied to the model, but there was no sign of leakage.

Anger puts the demon blood copper in the hot melt method.

As time went by, the demon blood copper was within the hot melt method, and there were signs of melting slowly...

(End of this chapter)