Chapter 22

"Ding..."

The sudden ringing of the telephone interrupted Yun Fei's meditation. Yun Fei took back his memories of the past few months when he came to this era and put his hand next to him before he installed the phone.

"Hello, yes, this is Yunfei. Who's calling, please?" As soon as the phone was answered, the other party directly asked to find Yunfei, deputy factory director of Yunfei.

"Oh, camart? OK, no problem... "After a while, Yun Fei put down the phone.

Camart called and informed Yunfei that camart would bring several customers to Qingfeng machinery factory on Monday, that is, the day after tomorrow to investigate the NC processing capacity of Qingfeng machinery factory. Saying hello in advance is to make Qingfeng machinery ready.

Since the last time Qingfeng machinery finished the batch of 100 stainless steel thin-walled parts for camart company, the two companies have established a cooperative relationship. Every month, more than half of the NC machine tools in the NC workshop of Qingfeng machinery are working on the foreign trade workpieces of camart company. Yunfei basically spends more than ten hours in the NC workshop every day, not only training the workers who can work independently, but also compiling the processing technology of parts and the production program of NC machine tools. Of course, these expensive NC machine tools have to be repaired after they have problems. Although I took two apprentices to learn the maintenance of CNC machine tools with me, maintenance is not like operation. There are many contents from design to mechanical and electronic aspects. It is difficult to learn anything in a short time.

The profit of 200 stainless steel foreign trade parts per month reached 240000, which was about to catch up with the net profit of Qingfeng machinery in one year before Yunfei came.

At the beginning, Kmart company saw such huge profits in NC machining and made use of their relationship abroad to build several NC machine tools. After the arrival of the equipment, it was found that the CNC technicians they recruited would only be able to operate the basic operations. For the CNC processing technology of complex parts and various special requirements of foreign trade workpieces, they are often unable to meet.

Even with the stainless steel thin-walled parts, they only made 30% of the finished products. The main reason is that it can not solve the deformation problem of stainless steel thin-walled parts.

The products produced not only failed to meet the requirements of the other party, but also lost a lot of money because of the high cost of special imported materials. Just as Wang Qingfeng collected CNC machine tools all over the world, he could only transfer all the eight CNC lathes from Rb and Germany and two CNC milling machines from Siemens to Qingfeng machinery factory.

This made Wang Qingfeng very happy. After finishing the first batch of 100 stainless steel thin-walled parts of camart company, the other party gave a large list of hundreds of pieces per month. In addition, the original customers had a lot of spare parts that needed CNC machine tools. After hearing that Qingfeng machinery had now started CNC processing capacity, they threw them all to the salesman of Qingfeng machinery.

Wang Qingfeng, who is urged by customers to deliver goods every day, is in a mess. Seeing the olive branches of camart company is like a hungry dog who sees food and pours fiercely, no matter which food is good or bad.

Originally, there were many second-hand master machines on the market, but the price was extremely expensive. It was only a second-hand small CNC lathe equipped with FANUC System 6132. Others offered 150000 or 60000, and bargaining was not allowed. Unfortunately, these equipment can't do camart's stainless steel parts.

Camart's CNC machine tools are transferred to Qingfeng machinery for long-term cooperation in the future, and the price is relatively generous.

There are 162000 simple cars of FANUC System of Rb Toshiba company and 198000 CNC cars of Siemens system of DMG company. The most expensive is the two CNC milling machines of DMG company, which has reached 370000, which makes Wang Qingfeng heartache. Originally, he didn't want the two CNC milling machines, but Yunfei insisted, so he could only move the two CNC milling machines back from camart's processing plant.

Camart originally did everything. After transferring the CNC machine tool to Qingfeng machinery, we saw the huge profits here, and spent most of our energy on the CNC machine tool trade and making high-precision complex accessories for foreign companies. At the same time, we signed a long-term cooperation agreement with Qingfeng machinery.

As for the existence of Yunfei in Qingfeng machinery, the people of camart company also know through those stainless steel thin-walled parts. When they first started to make thin-walled parts, they specially went to Qingfeng machinery for advice.

Wang Qingfeng didn't know much about the thin-walled piece, so he directly brought the people of camart company to Yunfei. Yun not only used the terms elastic deformation and plastic deformation, but also made two CNC engineers of camart company put away their contempt for the child's deputy factory director.

Although they have been in contact with this industry for a long time and have worked in state-owned enterprises for several years, unlike private enterprises, state-owned enterprises can only work as operators, not even programming! After all, the numerical control equipment in state-owned factories cost a lot of valuable foreign exchange.

In this era, few Chinese people understand the difference between NC machining and ordinary machining, so Yunfei doesn't worry that the people of camart company won't work after understanding it. After all, in China in the early 1990s, the NC machining market was not as common as that of later generations. All CNC machine tools are 100% imported, which not only discourages private machinery factories that want to launch CNC machine tools, but also the state has not liberalized the foreign exchange policy. Again, the imported CNC machine tools were not bought in the age of this year, especially in Chinese mainland.

Yunfei's explanation was not good. Two CNC engineers of camart company ran back to resign that day and had to learn CNC technology with Yunfei. Originally, camart was going to dig Yunfei into his company, and the super high salary of 5000 a month was rejected. Finally, in desperation, camart company not only sold the equipment of the processing plant to Qingfeng machinery, but also sold more than 20 workers and technicians to Qingfeng machinery at a friendly price of 10000 yuan.

The talent transaction between the two companies is estimated to be the earliest talent transaction in China.

Yunfei has to pay attention to the customers brought by camart. You know, camart company brings, even if it is not a salesman of a foreign company, at least it is a foreigner of a foreign-funded enterprise.

If the processing quantity is not too large, the customer will not ask to investigate the processing environment.

"Director Yun, I'm back." Luo Xiaoli had not entered the door, but her excited voice reached the office.

"How many times have I told you that as a secretary, every word and deed represents the image of the leader and the factory. What's your style!" When Luo Xiaoli enters the office, Yun Fei teaches her a lesson with a straight face.

"Yes, yes, the leader's lesson is that I will pay attention to it in the future." Luo Xiaoli immediately regained her seriousness. Although he turned right, as long as the cloud tyrant said a word, he had to pack up and leave! It's not easy to become a regular. You haven't got the high salary of 650 for a month. Don't get complacent and be driven away by the cloud tyrant. In that case, you'll suffer in vain in recent months.

"Go to the workshop and inform them. Before leaving work today, rectify the environment in the workshop according to the 6S management requirements. There will be an old foreign visit to the company next Monday. If anyone is still perfunctory as before, don't blame me for being unkind." Yun explained why he asked the following people to do so.

"OK, leader, I'll inform you immediately." Luo Xiaoli repressed her joy and went to the workshop.

"This girl has made great progress and is far from maturity..." Yun Fei shook his head with a bitter smile, took out a Hongtashan, and was ready to continue to draw the circuit diagram of the upgraded control chip of gsk928.

He dare not take out the chip system that is too advanced. If it is taken out these days, farak and Siemens will definitely work together to kill the manufacturers who have mastered these industrial control chip technologies. In that way, it is estimated that the NC industry that has not yet sprung up in China can not even reach the level of the previous life.

For gsk928 system, what he needs to do is to improve the defects of the system itself to reach the level of Siemens and farak system.

Before the domestic CNC industry has not reached a certain scale, it can only follow the trend and launch domestic systems.

"Everybody stop and have something to tell you." As soon as Luo Xiaoli entered the machining workshop, she shouted at the top of her voice.

"Xiao Li, you're so excited that there won't be anything good to announce?"

"Dating? Would you like to invite us to have candy... "

"Xiao Li, did you hook up with the cloud tyrant? Dare to let us stop our bed during working hours... "

……

"Xiao Li, just tell us what you want. There's so much work. This delay will have to work overtime at night." Yang Dezhi was scolded by Yun Fei in the morning. Naturally, he had to be careful.

"Well, everyone listen. Yuntou asked me to inform you that 6S should be done well before work. There will be an old foreign investigation next Monday." Luo xiaolish ignored the teasing of the young people and announced happily when everyone gathered around her.

"Isn't it? She actually called "cloud tyrant cloud head?"

"Xiao Li, be honest. Did you seduce tyrant Yun to bed?"

"Xiao Li, did tyrant Yun force you? Tell my brother, if it's true, my brother will work hard for you... "

……

"Stop..." Luo Xiaoli was bewildered by all the young people in the workshop. It seems that people who are used to high-pressure rule can't be too good to them.

Luo Xiaoli said to the crowd with a straight face, "as the cloud said, if you are perfunctory as before, you don't have to wait for Monday. You can pack up your bags and leave today. By the way, I just seduced tyrant Yun into bed. That's my ability. Can you manage it? "

Then he raised his head and left the stunned workshop.