Chapter 379

"Are you an expert from the Soviet Union?" Facing the blonde white man in front of him, the old man asked curiously.

Many engineers, experts and senior skilled workers from the Soviet Union are known to many people in China. After the disintegration of the Soviet Union, China took the opportunity to network many experts to contribute to China's national defense, which became the leader of the red camp after the Soviet Union.

However, most of the experts from the Soviet Union are in China's military factories, which is difficult for the outside world to see. However, a large number of Soviet engineers and technicians have been fooled to China since khamat started headhunting business, which is a very common phenomenon along the coast.

The experience and technology of Soviet engineers and technicians are much richer than those Chinese without professional training, and the cost is much lower than that of engineers and technicians in European and American countries. They are very favored by the bosses of Chinese private enterprises whose development is limited by the talent gap.

"Yes, Mr. chairman!" Tanalia didn't know that the old man had retired a long time ago.

"Deng Lao, this is tanaliya, the chief engineer of our electronics division, from Ukraine." For tanaliya's address to Deng Lao, Yunfei doesn't know whether it should be corrected or not. Anyway, he can't interrupt this matter.

"Oh! Ms. tanalia, my old man has long retired. You can call me Deng like them. Thank you for your contribution to the cause of CNC machine tools in China. How about it? Are you still used to it in China? " The old man did not expect that the chief engineer of the electronics division of 91 heavy industry was actually a skilled person.

"Thank you for your concern. Our boss is very nice and has created a good research environment and living environment for us. It's much better than in the Soviet Union... "Tanaliya didn't forget to flatter her young boss at this time.

She knew that only when the boss was comfortable, could she sign on the research projects they applied for, and then pay for them.

While listening to Yun Fei's introduction, Deng shook hands with the project leaders of these research teams, most of whom are Soviet. He thanked everyone.

For Vissarion lovich, who stood side by side with Sun Lin and situ Heyun, the old man was a little surprised. He shook hands with him and cast an inquiring look at Yun Fei.

Yun Fei put his mouth to the old man's ear and said something quietly, which made the reporters a few meters away very curious. However, this picture was captured by almost all reporters.

The old man's visit was originally private. The outside world has a strong curiosity about the mysterious 91 Heavy Industry Research Institute, which has not been established for a long time.

It is said that there are many major scientific research projects in this private research institute, which have not been approved by the state. They are all privately funded by the boss of 91 heavy industry, and they have not been reported to the state!

This photo alone can make all journalists feel that their trip is worth it. The elderly after retirement, the young rich who have just grown a beard on their mouth and the head of the research team of young high-tech projects! There are too many hidden contents, which are worth digging.

There are many private things that can't be seen in the newspapers, but what major projects in the Research Institute of 91 heavy industry can't be known to most national ministries and commissions?

Like the Chengdu municipal Party committee and government, Jiuyi heavy industry did not hold any welcome ceremony such as flowers, so it asked the middle and high-rise cadres to greet them outside the office building, and then brought the members of the delegation to the production workshop.

"Most of these equipment are the old equipment in the original 9327 plant. After maintenance and transformation by researchers from China and the Soviet Union, they are almost one-third more energy-saving than the old model, and the production efficiency is increased by 20 percent." The government did not arrange a tour route. The whole delegation visited 91 heavy industry according to the route arranged by 91 heavy industry itself.

In order to let those who were not born professionally and did not even understand what happened to CNC machine tools have an intuitive understanding, under the joint decision of Yun Fei and Xie Heping, the delegation visited directly from the smelting workshop of 91 heavy industry.

This visit is actually the process flow of the whole NC machine tool production.

However, at the age of 91, the delegation was again divided into two parts. Most of the foreign delegations mainly visited the entire CNC machine tool production workshop of 91 heavy industry, accompanied by Wu Zhongda. After visiting the most basic smelting and casting workshop, the old man will directly enter the assembly workshop, and then the highlight is to visit the independent research institute.

Therefore, he explained the smelting and casting workshop where the old man only introduced himself. You know, he doesn't have a special understanding of smelting and casting, the general manager who studies manufacturing rather than materials.

"Yes, who says that old equipment can't produce good equipment? Your experience should be popularized throughout the country. Our country is not rich yet. There is a lot of room for improvement in energy conservation and production efficiency. Now that these old equipment can be used

, why do you have to replace those new equipment that can not greatly improve production efficiency and quality? " The old man was seldom pleased to hear that Wu Zhongda introduced that all kinds of furnaces in the smelting workshop of Jiuyi heavy industry were transformed old equipment and second-hand equipment purchased from the Soviet Union.

Yun Fei, a young man, knows how to live!

In doing business, we should give full play to people's subjective initiative and strive to improve our own technical level. Everything depends on buying new equipment, which can not be improved quickly. At the same time, we can't have a great accumulation and improvement in technical level.

Up to now, most of the small amount of foreign capital in China has been taken away by foreign equipment manufacturers!

This makes the old man very sad.

"Cloud boy, good, very good." After the old man said that, he smiled and praised Yunfei.

For this young man whom he had been very optimistic about from the beginning, old man si did not hesitate to praise.

"Mr. Deng, you flatter me. I was also forced. If there were not thousands of people in the whole company to support, I would also like to buy new equipment! After all, it's too much trouble to do it yourself! " Yun Fei is very proud of this.

Of course, these old equipment can be transformed into what they are now, but thanks to his blessing of being a technician in that state-owned factory for so many years. He didn't major in materials. He didn't know about these materials equipment, but many of the products they produced at that time were used in the military industry. Therefore, the requirements for the furnace batch number of materials are very high.

Even if it is used on the equipment, the operator of all production processes of the product can be traced from the furnace batch number! Therefore, many times, the machining workshop must contact the melting and casting workshop of the production materials at any time. Often influenced, I am quite familiar with the technical parameters and structure of high-temperature furnaces used for smelting and heat treatment.

"Mr. Deng, this is our CNC machine tool assembly workshop. Most of them are made in China, except for servo motors for transmission and some electronic and electrical units for feedback control." Yun Fei knows that the elderly have great expectations for domestic production, but the servo motor or stepping motor used to drive CNC machine tools cannot be produced in China, which can't deceive the elderly at all. Otherwise, China's No. 1 CNC machine tool manufacturer will not fall into less than two years of construction of Jiuyi heavy industry

On the head of private enterprises in.

"When can all the spare parts be completely self-produced?" Seeing that the whole workshop was filled with CNC lathes and CNC milling machines being assembled, the old man was going to praise Yun Fei, but he heard Yun Fei's words - the core components could not be produced independently, and his face became lonely.

If it cannot be completely made in China, it is very likely that Jiuyi heavy industry will be stuck by foreign parts suppliers when competing with foreign countries.

It is estimated that this is the reason why the young man did not expand the production scale of Jiuyi heavy industry.

Once Jiuyi heavy industry expands its production scale, it will fully open its competition with foreign machine tool suppliers. Now, because of the emergence of products of Jiuyi heavy industry, foreign CNC milling machines and CNC lathes have been reduced on a large scale. If Jiuyi heavy industry has developed a three-axis machining center, foreign CNC machine tool manufacturers will feel threatened.

After all, CNC lathes and CNC milling machines are not products imported from China on a large scale. Linkage machine tools with more than three axes are the main products of CNC machine tools in China.

"Now the Institute is conducting comprehensive research on core components. If nothing happens, these core components can be completely made in China within three years. Chengdu viewpoint Research Institute has now begun to study the grating ruler used by CNC machine tools for displacement detection. It is estimated that samples will be produced by the end of this year... "

Three years, at least one conservative estimate.

The research on the AC servo motor of Jiuyi heavy industry has long begun under the leadership of situ Heyun. At the same time, Huadu CNC is also studying this aspect, but it has not made a breakthrough.

"In other words, it will take three years for your CNC machine tool production to expand?" The old man sighed.

Because of the concern about Yunfei, the elderly also know that CNC machine tools are the market. At present, the domestic demand for CNC machine tools is growing every year, but those state-owned machine tool factories are not competitive. They always want to rely on the introduction of production technology from abroad, ignoring their own technology accumulation and development.

However, multi axis CNC machine tools with more than three axes belong to a kind of strategic equipment in the whole world!

Only Jiuyi heavy industry can carry the banner of national industry of CNC machine tool industry.