Chapter 200

Without doing anything, he got a 60 million yuan UAV manufacturing factory for nothing. Shen Jianwei was 100% sure that Zhuang Jianye would never get away from it, but he couldn't understand how to operate it.

But whether you want to understand it or not, the old man admires Zhuang Jianye very much. No matter what you do, you can make the successful factory take out something worth 60 million yuan without any reason. It's worth everything, even if you offend people.

Zhuang Jianye also thinks it's worth it, and it's a super value that can't be worth any more.

Tengfei factory has built these two multi blade wheel shot peening machines that the working group visited. It's not that we don't want to build more, but that we can't continue to build them.

Because there are so many electro-hydraulic servo valves and controllers available in Tengfei factory, there is no need to continue to look for shot peening machine. Instead, it will be put on ty-2 UAV for export to the United States.

Yes, the electro-hydraulic servo valve and controller on the shot peening machine of Tengfei factory are provided to Tengfei factory by H company of the United States for the production of fly by wire control components of ty-2 UAV.

Peng Chuan had a whim. He asked Zhuang Jianye for two tests and found that the hydraulic equipment was much simpler and more effective than the original hydraulic equipment. Not to mention that the overall structure became more sophisticated. At the same time, the maintenance cost was reduced by more than half, and the machining accuracy was increased by 30%.

More importantly, the electro-hydraulic servo valve and its controller are born with digital control technology, so the difficulty of programming is greatly reduced.

After discovering these advantages, Peng Chuan, the chief mechanical expert of Tengfei factory, broke into Zhuang Jianye's office and asked Zhuang Jianye for 100 sets of electro-hydraulic servo valves and their supporting controllers. He was ready to upgrade the equipment of Tengfei factory in the way of impeller shot peening machine.

Zhuang Jianye can take out seven or eight sets of redundant electro-hydraulic servo valves and their supporting controllers, which is saved by drilling the hole of equipment damage. You should know that H company does not open up the supply of these things as many as you want. Considering the ultra-low scrap rate, what people give is a carrot and a nail, and none of them is redundant.

Zhuang Jianye really wants to give Pengchuan 100 sets of equipment to improve production capacity. The problem is that if they are given, UAVs will not be able to work, so only Pengchuan's requirements can be met.

Peng Chuan is very unhappy. He is addicted to equipment upgrading now. When he hears that Zhuang Jianye can't meet the requirements, he is just like a fool who can't get the treasure. What he is anxious about is scratching his ears.

There's no way. Zhuang Jianye can only tell him to wait. Now he is cooperating with the flight Machinery Research Institute to study the method of imitating electro-hydraulic servo valve.

Peng Chuan asked Zhuang Jianye to write a letter of introduction and prepare to go to the flight Machinery Research Institute to see their progress. Zhuang Jianye knew that it was useless to persuade him, so he gave him a letter. Peng Chuan just went to the flight Machinery Research Institute.

Without Peng Chuan and the key parts, Tengfei factory still has a big sale in tears, and the sale is almost ghost. The problem is that Huang Feng doesn't know, and Chenggong factory doesn't even know. Anyway, Zhuang Jianye just said that. They believed it, and Zhuang Jianye couldn't help it.

Of course, Zhuang Jianye won't disclose a word about it to the outside world, at least until the successful factory delivers it to the UAV factory. After all, an independent UAV factory is very important for today's take-off factory. Whether the future aircraft manufacturing road can go well or not, this factory is very critical.

Before, Tengfei factory wanted to complete the project independently, and the capital of Tengfei factory was not bad. The key is that all kinds of approval documents which are so many that people doubt their life have become obstacles for the independent UAV factory.

Even if Wang Wei didn't intervene and let Tengfei plant roll back and forth on the edge of the knife, it would be difficult to set up a UAV production plant under Yonghong plant. Not only the local government's consent is required, but also the ministries and commissions have to go through more than a dozen departments. Finally, several major leaders of the ministries and commissions have to sign their names, and then send them to other functional departments to continue Approval.

All kinds of complexity, let alone a small branch factory, is a large factory like Yonghong factory. Without one or two years, it can't get all the approvals.

In addition, Wang Wei caused a lot of bad things, which also involved a lot of energy of the take-off plant, so it's difficult to set aside the construction of the UAV plant alone.

Just when Zhuang Jianye and others were at a loss, Huang Feng came in with the working group.

It's difficult for Tengfei factory to approve documents, but it's not difficult for the successful factory of the national key factory. After all, several senior leaders of the successful factory hold important posts in the ministries and commissions. The Ministry's approval documents can be completed without saying a word, which is a small problem that can be solved by walking through the door.

As for other functional departments, not to mention, it's nothing more than a matter of running several times. So it's absolutely right to hand over the matter to the successful factory. As for the incidental expenses, the successful factory has to give them. If Zhuang Jianye doesn't accept them, he looks down on people, so he is reluctant to accept them.

Isn't it that he doesn't compete with Chenggong factory in the domestic market of the blade wheel shot peening machine? What a big deal. Is Chuang Jianye such a mean person?So in the atmosphere, Zhuang Jianye announced at a meeting of all cadres of Tengfei factory that after the comprehensive expansion of Tengfei factory, a new round of construction period of Tengfei factory began.

During this period, the personnel arrangement of Tengfei factory was formally confirmed by the Ministry in the form of notice.

Zhuang Jianye is the director of Tengfei factory, and proposes to be a member of the Party committee of Yonghong factory.

Tengfei factory has set up its own party branch, with Shen Jianwei as the Secretary of the Party branch. Meanwhile, his position as a member of the Party committee of Yonghong factory remains unchanged.

Lin Guanghua is the chief engineer of Tengfei plant, and proposes to be a member of the Party committee of Tengfei plant.

Peng Chuan is the director of the Technology Department of Tengfei plant, and proposes to be a member of the Party committee of Tengfei plant.

Wang Heping, Mr. Ju, Liu Chun, Mr. Cen and even Mr. Ju Tao were confirmed in the personnel notice, and they became official cadres with ministries and commissions.

However, these are still eclipsed by the aura of the two members of the Party committee of Yonghong factory. This is not because of the administrative level and treatment of the deputy department level of the members of the Party committee of Yonghong factory, but the discourse power contained in them.

You know, there are only six members of the Party committee of Yonghong factory. Even if you add one Zhuang Jianye, there are only seven.

However, among the seven people, Tengfei factory has two seats, plus he Ming, the chief engineer who has a close relationship with Tengfei factory. Tengfei factory has three seats in the Party committee of Yonghong factory. As long as we fight for another seat at random, Tengfei factory can hardly have too much say in the party committee where the minority is subordinate to the majority.

Perhaps the Ministry is also worried that Tengfei factory is superior to Yonghong factory. After arranging the personnel of Tengfei factory, the Ministry has also made adjustments to Yonghong factory. Wang Wei was unexpectedly kicked out and assigned to a remote third tier small factory as factory director.

Yu Qizhang returned to Yonghong factory and continued to be the factory director of Yonghong factory. At the same time, he gave Yu Qizhang a pilot reform of the factory director responsibility system, so the new balance was reestablished in Yonghong factory.